SDP couldn't discovery any device or service (stlc2500)

Benson Dong <[email protected]>
Newsgroups gmane.linux.bluez.user
Message-ID <[email protected]>
The environment i used is BT Module (STLC2500) with bluez 3.26 running on Montavista kernel 2.6.18.

Here is hciconfig output:
# hciconfig -a
hci0: Type: UART
BD Address: 00:80:E1:00:AB:BA ACL MTU: 1021:7 SCO MTU: 0:0
UP RUNNING PSCAN ISCAN
RX bytes:718 acl:0 sco:0 events:23 errors:0
TX bytes:369 acl:0 sco:0 commands:23 errors:0
Features: 0xff 0xeb 0x8d 0xfe 0x9b 0xe9 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: ACCEPT MASTER
Name: 'BlueZ (0)'
Class: 0x080100
Service Classes: Capturing
Device Class: Computer, Uncategorized
HCI Ver: 2.0 (0x3) HCI Rev: 0x402 LMP Ver: 2.0 (0x3) LMP Subver: 0x520
Manufacturer: ST Microelectronics (48)

I wonder only from the output of 'hciconfig -a ',could i make sure that the BT Module i used has really got up?

The following is the output from 'hcidump -x -V &' when trying 'sdptool browse' and 'hcitool scan':
# hcidump -x -V &
# HCI sniffer - Bluetooth packet analyzer ver 1.41
device: hci0 snap_len: 1028 filter: 0xffffffff
# sdptool browse
Inquiring ...
< HCI Command: Inquiry (0x01|0x0001) plen 5
lap 0x9e8b33 len 10 num 20
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) status 0x00 ncmd 1
> HCI Event: Inquiry Complete (0x01) plen 1
status 0x00
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 2
# hcitool scan
Scanning ...
< HCI Command: Inquiry (0x01|0x0001) plen 5
lap 0x9e8b33 len 8 num 0
> HCI Event: Command Status (0x0f) plen 4
Inquiry (0x01|0x0001) status 0x00 ncmd 1
> HCI Event: Inquiry Complete (0x01) plen 1
status 0x00
> HCI Event: Command Status (0x0f) plen 4
Unknown (0x00|0x0000) status 0x00 ncmd 2

It couldn't discovery any services with 'sdptool browse' or 'hcitool scan' ,although there's a bt headset openned.
It seems that it has a right 'hciconfig -a' output ,but still could not work.Is it a hardware problem or software problem?

Could someone give me some hints?
Any help would be much appreciated!

Best Regards
Benson


_________________________________________________________________
Connect to the next generation of MSN Messenger 
http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference 
Register now and save $200. Hurry, offer ends at 11:59 p.m., 
Monday, April 7! Use priority code J8TLD2. 
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.