Re:two node see each other as "down"

Hello Didy,


  I've seen two good responses to this thread, one from Chris 
Thevaos and one from Evan Hisey - but I'm not sure if your 
problem was resolved.

  If you are still having trouble, then please see this paper for
further help - it is based on Fedora Core 1, but it should still
provide a template and a checklist for your own environment;
  http://midnightcode.org/papers/How%20To%20-%20Instant%20openMosix.pdf


----- Original Message -----
>From: "Didy Tehumahu" <[email protected]>
>To: "openmosix" <openmosix-general-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
>Subject:  [openMosix-general] two node see each other as "down"
>Date: Thu, 23 Mar 2006 10:13:05 +0700
>
> 
> hello everybody out there , my name is Didy. i'm a student and i'm from =
> Indonesia
> 
> i'm now configure openmosix . all souerce i get from internet and now i'm so confusing with 
openmosix :(
> 
> i have two node in my home and i finnish to configure openmosix . when i 
> run the master and the second node,  it's work fine but two node see each other as 
"down" i'm use redhat 9 for my two node
> 
> master node :
> # ./setpe -r
> This is OpenMosix node #1
> Network protocol: 2 (AF_INET)
> OpenMosix range     1-1     begins at openMosix.domain
> OpenMosix range     2-2     begins at node-01.domain
> Total configured: 2
> 
> #  ./showmap
> My Node-Id: 0x0001
> Base Node-Id Address          Count
> ------------ ---------------- -----
> 0x0001       192.168.88.91    1
> 0x0002       192.168.88.60    1
> 
> # ./mosctl status 1
> up.
> # ./mosctl status 2
> down.
> 
> 
> 
> second node :
> # ./setpe -r
> This is OpenMosix node #2
> Network protocol: 2 (AF_INET)
> OpenMosix range     1-1     begins at openMosix.domain
> OpenMosix range     2-2     begins at node-01.localdomain
> Total configured: 2
> 
> # ./showmap
> My Node-Id: 0x0002
> Base Node-Id Address          Count
> ------------ ---------------- -----
> 0x0001       192.168.88.91    1
> 0x0002       192.168.88.60    1
> 
> # ./mosctl stat 1
> down.
> #./mosctl stat 2
> up.
> 
> my ethernet card in master node  :=20
> #  mii-tool -v
> eth0: negotiated 100baseTx-FD, link ok
>   product info: vendor 00:00:00, model 0 rev 0
>   basic mode:   autonegotiation enabled
>   basic status: autonegotiation complete, link ok
>   capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
>   advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
>   link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
> 
> my ethernet card in second node  :
> #  mii-tool -v
> eth0: negotiated 100baseTx-FD, link ok
>   product info: vendor 00:40:63, model 52 rev 4
>   basic mode:   autonegotiation enabled
>   basic status: autonegotiation complete, link ok
>   capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
>   advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD =
> flow-control
>   link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
> 
> sorry my english bad , can you help me , i'm still confusing.. :(=20
> 
> 
> Didy Tehumahu
> 


--
Ian Latter
Late night coder ..
http://midnightcode.org/



-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642