Preview alpha quality OpenSSI on Debian Etch

John Hughes <[email protected]>
Newsgroups gmane.linux.cluster.ssic.user,gmane.linux.cluster.ssic.devel
Message-ID <[email protected]>
Howto:

   1. Install Debian Etch

   2. Add

      deb http://www.atlantech.com/~john/openssi-etch ./
          

      to your sources.list

   3. Add

      Package: *
      Pin: origin www.atlantech.com
      Pin-Priority: 1000
          

      to your /etc/apt/preferences

   4. Create a file /etc/apt/apt-conf.d/90allow-unauthenticated containing:

      APT::Get::AllowUnauthenticated "true";
          

   5. apt-get update

   6. apt-get install initrd-tools

   7. Add the module for your cluster-interconnect nic to
      /etc/mkinitrd/modules

   8. modprobe loop
      modprobe ext2

   9. apt-get dist-upgrade

      At this point you will be warned that the running kernel will be
      removed.  This is because of a necessary downgrade of udev.  Allow
      it to happen.

      :-(  Warning - your system is unbootable starting from this point.

  10. apt-get install openssi

      configure the node number, cluster interconnect,2 clustername,
      root failover as usual.

  11. apt-get install syslinux if it's not already installed (temporary
      step due to an error on my part).

  12. :-)       Your system should now be rebootable.  Reboot it.

  13. The current version of dhcpd has an irritating "bug" - it no
      longer has a default for the "next-server" option (i.e. the
      address of the tftp server).  You'll have to add the option:

      next-server xxx.xxx.xxx.xxx;
          

      (where xxx.xxx.xxx.xxx is the cluster interconnect address for the
      initnode) to the file /etc/dhcp3/dhcpd.proto

  14. run:

      mkdhcpd.conf

  15. run:

      invoke-rc.d dhcp3-server restart
          

  16. Now you can try booting a secondary node with etherboot or PXE,
      then ssi-addnode as usual

Still many rough edges, and the kernel is not up-to-date with Roger's
latest work, put it works somewhat.

All the sources are available for "apt-get source" at the same location
as the binaries.

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft 
Defy all challenges. Microsoft(R) Visual Studio 2008. 
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/

_______________________________________________
Ssic-linux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ssic-linux-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.