Re: LinuxSSI x86_64 bit
"Cumberland, Lonnie" <[email protected]> Fri, 25 Jun 2010 14:02:15 -0400
| Newsgroups | gmane.linux.cluster.ssic.user |
|---|---|
| Message-ID | <A3FD81D57663BD41BF701B44F5E75CE712CF39F02C@MBCLUSTER.xchange.nist.gov> |
Hello Scott, In my last attempt (a few moments ago) I simply added the e1000 to the modules file but forgot to run mkinitrd. Once rebooted, the system does not boot up and falls out with an error message. Looks like I will have to restart the whole process again and see. Thanks and have a great day, Lonnie Cumberland, Prof. Physicist National Institute of Standards and Technology Ionizing Radiation Division (846) Radiation Physics Group (245), Room C106 ADDRESS: 100 Bureau Drive, Stop 8462 Gaithersburg, MD 20899-8462 EMAIL: [email protected] http://physics.nist.gov/Divisions/Div846/div846.html -----Original Message----- From: Scott Walters [mailto:[email protected]] Sent: Friday, June 25, 2010 1:47 PM To: Cumberland, Lonnie Cc: Roger Tsang; [email protected] Subject: Re: [SSI-users] LinuxSSI x86_64 bit On 6/25/10, Cumberland, Lonnie <[email protected]> wrote: > Hello All, > > In step 10 of the > > http://openssi.org/cgi-bin/view?page=openssi.html > > It says to: > > "Add the module for your cluster-interconnect nic to /etc/mkinitrd/modules > (You can find out what it is by doing: > ls -ld /sys/class/net/ethX/device/driver/module > where "ethX" is the nic you want to use). " > > How do I do this? > > I found out that the module is "e1000" Add the line to /etc/mkinitrd/modules. Mine has these in it: 3c59x 8139too 3c509 I also kept the comment at the top reminding me to run mkinitrd after changing the file. Machines on the cluster net-boot and mount the cluster filesystem as their root filesystem, and this file tells the initnode which network modules it needs to include in for the netbooting hosts so that they can get the network up and mount the cluster filesystem. The modules listed in there get built into the /boot/initrd-* (for your kernel version) file. After editing that file and doing mkinitrd, I also like to do ssi-ksync to make sure all of the netbooting apparatus is updated and in order. Thanks, -scott ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo