Re: [comedi] Re: USB-DUX hardware now open source
Thomas Schmidt <[email protected]> Tue, 7 Mar 2023 12:15:57 +0100
| Newsgroups | gmane.linux.comedi |
|---|---|
| Message-ID | <CAMv6xabgAm7WnnFPsKu8ZJxC1GrZfySXoGW5U4NSzTwU9OUxHw@mail.gmail.com> |
--000000000000d12bdd05f64d897e Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable PS: The attys-scope can i.e. geophones (voltage output) be attached? Am Di., 7. M=C3=A4rz 2023 um 12:00 Uhr schrieb Bernd Porr <[email protected]= e.uk>: > PS: the Sigma is open source and open hardware now. You can also send > the design files to any prototyping service. > https://github.com/glasgowneuro/usbdux/tree/main/usbdux-sigma Of course > if there is larger interest I'd be happy to make a batch of them and/or > help! > > On 07/03/2023 10:52, Bernd Porr wrote: > > Hi Thomas, > > > > the PRI team has been working very hard to remove COMEDI from their > > custom Kernel. They even removed the config file. I have no idea why > > there is such hostility: > > https://github.com/raspberrypi/linux/issues/534 > > of course you could simply copy comedi back into the kernel and that > > should work. > > > > My students tried to re-enable it recently and gave up but they are no > > kernel programmers. > > > > If there is interest I can write a generic "how to" how to patch comedi > > back into the RPI kernel. > > > > The USB-DUX-sigma is no longer on sale but I have a few (without box) > > still about. You can buy them for =C2=A3100+shipping. Please DM via ber= nd@ > >> > > Bernd Porr <[email protected]>. > > > > /Bernd > > > > On 07/03/2023 10:30, Thomas Schmidt wrote: > >> Hi, > >> > >> is it possible to run usbdux on a raspberry pi? If so, then I'd like > >> to buy at least one of the USB-DUX-sigma boards. > >> > >> Best, > >> Thomas > >> > >> Bernd Porr schrieb am Sonntag, 8. August 2021 um 19:03:21 UTC+2: > >> > >> > >> Hi all, > >> > >> as most of you know here on the list I embarked on making dedicate= d > >> Linux DAQ boards 15 years ago and they have been part of COEMDI / > >> Linux. After 15 years now we are no longer manufacturing them but > >> we've made the PCB designs open source: > >> > >> https://github.com/glasgowneuro/usbdux > >> <https://github.com/glasgowneuro/usbdux> > >> > >> I have still a few USB-DUX-sigma boards without enclosure here. > >> That's the most recent one. Anybody interested in these please get > >> in touch. > >> > >> Best, > >> /Bernd > >> > >> -- > >> You received this message because you are subscribed to the Google > >> Groups "Comedi: Linux Control and Measurement Device Interface" group. > >> To unsubscribe from this group and stop receiving emails from it, send > >> an email to [email protected] > >> <mailto:[email protected]>. > >> To view this discussion on the web visit > >> > https://groups.google.com/d/msgid/comedi_list/eb9b15d9-bd05-4e54-8810-369= cce3cf6a3n%40googlegroups.com > < > https://groups.google.com/d/msgid/comedi_list/eb9b15d9-bd05-4e54-8810-369= cce3cf6a3n%40googlegroups.com?utm_medium=3Demail&utm_source=3Dfooter > >. > > > > -- > http://www.berndporr.me.uk > http://www.attys.tech > http://www.eigenproductions.co.uk/ > http://www.linux-usb-daq.co.uk > http://www.imdb.com/name/nm3293421/ > +44 (0)7840 340069 > > -- > You received this message because you are subscribed to a topic in the > Google Groups "Comedi: Linux Control and Measurement Device Interface" > group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/comedi_list/tBYH4iQeL14/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/comedi_list/57400b4f-ce0f-a19a-25cf-46d= 398ddf6f1%40berndporr.me.uk > . > --=20 You received this message because you are subscribed to the Google Groups "= Comedi: Linux Control and Measurement Device Interface" group. To unsubscribe from this group and stop receiving emails from it, send an e= mail to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/= comedi_list/CAMv6xabgAm7WnnFPsKu8ZJxC1GrZfySXoGW5U4NSzTwU9OUxHw%40mail.gmai= l.com. --000000000000d12bdd05f64d897e Content-Type: text/html; charset="UTF-8" Content-Transfer-Encoding: quoted-printable <div dir=3D"ltr">PS: The=20 <h1 id=3D"gmail-attysscopewinlinux" class=3D"gmail-mt-5">attys-scope</h1><d= iv>can i.e. geophones (voltage output) be attached?<br></div> </div><br><div class=3D"gmail_quote"><div dir=3D"ltr" class=3D"gmail_attr">= Am Di., 7. M=C3=A4rz 2023 um 12:00=C2=A0Uhr schrieb Bernd Porr <<a href= =3D"mailto:[email protected]">[email protected]</a>>:<br></div><bl= ockquote class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-lef= t:1px solid rgb(204,204,204);padding-left:1ex">PS: the Sigma is open source= and open hardware now. You can also send <br> the design files to any prototyping service. <br> <a href=3D"https://github.com/glasgowneuro/usbdux/tree/main/usbdux-sigma" r= el=3D"noreferrer" target=3D"_blank">https://github.com/glasgowneuro/usbdux/= tree/main/usbdux-sigma</a> Of course <br> if there is larger interest I'd be happy to make a batch of them and/or= <br> help!<br> <br> On 07/03/2023 10:52, Bernd Porr wrote:<br> > Hi Thomas,<br> > <br> > the PRI team has been working very hard to remove COMEDI from their <b= r> > custom Kernel. They even removed the config file. I have no idea why <= br> > there is such hostility:<br> > <a href=3D"https://github.com/raspberrypi/linux/issues/534" rel=3D"nor= eferrer" target=3D"_blank">https://github.com/raspberrypi/linux/issues/534<= /a><br> > of course you could simply copy comedi back into the kernel and that <= br> > should work.<br> > <br> > My students tried to re-enable it recently and gave up but they are no= <br> > kernel programmers.<br> > <br> > If there is interest I can write a generic "how to" how to p= atch comedi <br> > back into the RPI kernel.<br> > <br> > The USB-DUX-sigma is no longer on sale but I have a few (without box) = <br> > still about. You can buy them for =C2=A3100+shipping. Please DM via be= rnd@ >> <br> > Bernd Porr <<a href=3D"mailto:[email protected]" target=3D"_bl= ank">[email protected]</a>>.<br> > <br> > /Bernd<br> > <br> > On 07/03/2023 10:30, Thomas Schmidt wrote:<br> >> Hi,<br> >><br> >> is it possible to run usbdux on a raspberry pi? If so, then I'= d like <br> >> to buy at least one of the USB-DUX-sigma boards.<br> >><br> >> Best,<br> >> Thomas<br> >><br> >> Bernd Porr schrieb am Sonntag, 8. August 2021 um 19:03:21 UTC+2:<b= r> >><br> >><br> >> =C2=A0=C2=A0=C2=A0 Hi all,<br> >><br> >> =C2=A0=C2=A0=C2=A0 as most of you know here on the list I embarked= on making dedicated<br> >> =C2=A0=C2=A0=C2=A0 Linux DAQ boards 15 years ago and they have bee= n part of COEMDI /<br> >> =C2=A0=C2=A0=C2=A0 Linux. After 15 years now we are no longer manu= facturing them but<br> >> =C2=A0=C2=A0=C2=A0 we've made the PCB designs open source:<br> >><br> >> =C2=A0=C2=A0=C2=A0 <a href=3D"https://github.com/glasgowneuro/usbd= ux" rel=3D"noreferrer" target=3D"_blank">https://github.com/glasgowneuro/us= bdux</a><br> >> =C2=A0=C2=A0=C2=A0 <<a href=3D"https://github.com/glasgowneuro/= usbdux" rel=3D"noreferrer" target=3D"_blank">https://github.com/glasgowneur= o/usbdux</a>><br> >><br> >> =C2=A0=C2=A0=C2=A0 I have still a few USB-DUX-sigma boards without= enclosure here.<br> >> =C2=A0=C2=A0=C2=A0 That's the most recent one. Anybody interes= ted in these please get<br> >> =C2=A0=C2=A0=C2=A0 in touch.<br> >><br> >> =C2=A0=C2=A0=C2=A0 Best,<br> >> =C2=A0=C2=A0=C2=A0 /Bernd<br> >><br> >> -- <br> >> You received this message because you are subscribed to the Google= <br> >> Groups "Comedi: Linux Control and Measurement Device Interfac= e" group.<br> >> To unsubscribe from this group and stop receiving emails from it, = send <br> >> an email to <a href=3D"mailto:comedi_list%2Bunsubscribe@googlegrou= ps.com" target=3D"_blank">[email protected]</a> <br> >> <mailto:<a href=3D"mailto:comedi_list%2Bunsubscribe@googlegroup= s.com" target=3D"_blank">[email protected]</a>>.<= br> >> To view this discussion on the web visit <br> >> <a href=3D"https://groups.google.com/d/msgid/comedi_list/eb9b15d9-= bd05-4e54-8810-369cce3cf6a3n%40googlegroups.com" rel=3D"noreferrer" target= =3D"_blank">https://groups.google.com/d/msgid/comedi_list/eb9b15d9-bd05-4e5= 4-8810-369cce3cf6a3n%40googlegroups.com</a> <<a href=3D"https://groups.g= oogle.com/d/msgid/comedi_list/eb9b15d9-bd05-4e54-8810-369cce3cf6a3n%40googl= egroups.com?utm_medium=3Demail&utm_source=3Dfooter" rel=3D"noreferrer" = target=3D"_blank">https://groups.google.com/d/msgid/comedi_list/eb9b15d9-bd= 05-4e54-8810-369cce3cf6a3n%40googlegroups.com?utm_medium=3Demail&utm_so= urce=3Dfooter</a>>.<br> > <br> <br> -- <br> <a href=3D"http://www.berndporr.me.uk" rel=3D"noreferrer" target=3D"_blank"= >http://www.berndporr.me.uk</a><br> <a href=3D"http://www.attys.tech" rel=3D"noreferrer" target=3D"_blank">http= ://www.attys.tech</a><br> <a href=3D"http://www.eigenproductions.co.uk/" rel=3D"noreferrer" target=3D= "_blank">http://www.eigenproductions.co.uk/</a><br> <a href=3D"http://www.linux-usb-daq.co.uk" rel=3D"noreferrer" target=3D"_bl= ank">http://www.linux-usb-daq.co.uk</a><br> <a href=3D"http://www.imdb.com/name/nm3293421/" rel=3D"noreferrer" target= =3D"_blank">http://www.imdb.com/name/nm3293421/</a><br> +44 (0)7840 340069<br> <br> -- <br> You received this message because you are subscribed to a topic in the Goog= le Groups "Comedi: Linux Control and Measurement Device Interface"= ; group.<br> To unsubscribe from this topic, visit <a href=3D"https://groups.google.com/= d/topic/comedi_list/tBYH4iQeL14/unsubscribe" rel=3D"noreferrer" target=3D"_= blank">https://groups.google.com/d/topic/comedi_list/tBYH4iQeL14/unsubscrib= e</a>.<br> To unsubscribe from this group and all its topics, send an email to <a href= =3D"mailto:comedi_list%[email protected]" target=3D"_blank">co= [email protected]</a>.<br> To view this discussion on the web visit <a href=3D"https://groups.google.c= om/d/msgid/comedi_list/57400b4f-ce0f-a19a-25cf-46d398ddf6f1%40berndporr.me.= uk" rel=3D"noreferrer" target=3D"_blank">https://groups.google.com/d/msgid/= comedi_list/57400b4f-ce0f-a19a-25cf-46d398ddf6f1%40berndporr.me.uk</a>.<br> </blockquote></div> <p></p> -- <br /> You received this message because you are subscribed to the Google Groups &= quot;Comedi: Linux Control and Measurement Device Interface" group.<br= /> To unsubscribe from this group and stop receiving emails from it, send an e= mail to <a href=3D"mailto:[email protected]">comedi_= [email protected]</a>.<br /> To view this discussion on the web visit <a href=3D"https://groups.google.c= om/d/msgid/comedi_list/CAMv6xabgAm7WnnFPsKu8ZJxC1GrZfySXoGW5U4NSzTwU9OUxHw%= 40mail.gmail.com?utm_medium=3Demail&utm_source=3Dfooter">https://groups.goo= gle.com/d/msgid/comedi_list/CAMv6xabgAm7WnnFPsKu8ZJxC1GrZfySXoGW5U4NSzTwU9O= UxHw%40mail.gmail.com</a>.<br /> --000000000000d12bdd05f64d897e--