Re: [comedi] Re: USB-DUX hardware now open source

Hi all,

I've extracted the comedi drivers from the vanilla LTS kernel from=20
kernel.org and hacked the makefiles so that it can be compiled outwidth=20
the kernel and then installed:

https://github.com/glasgowneuro/comedi_raspberry_pi_bullseye

It compiles the USB drivers and installs them as modules.

I've done only a quick check so far but seem to work. Anybody out there=20
with an RPI can try as well.

/Bernd

On 07/03/2023 10:52, Bernd Porr wrote:
> Hi Thomas,
>
> the PRI team has been working very hard to remove COMEDI from their=20
> custom Kernel. They even removed the config file. I have no idea why=20
> there is such hostility:
> https://github.com/raspberrypi/linux/issues/534
> of course you could simply copy comedi back into the kernel and that=20
> should work.
>
> My students tried to re-enable it recently and gave up but they are no=20
> kernel programmers.
>
> If there is interest I can write a generic "how to" how to patch=20
> comedi back into the RPI kernel.
>
> The USB-DUX-sigma is no longer on sale but I have a few (without box)=20
> still about. You can buy them for =C2=A3100+shipping. Please DM via bernd=
@=20
> >> Bernd Porr <[email protected]>.
>
> /Bernd
>
> On 07/03/2023 10:30, Thomas Schmidt wrote:
>> Hi,
>>
>> is it possible to run usbdux on a raspberry pi? If so, then I'd like=20
>> to buy at least one of the USB-DUX-sigma boards.
>>
>> Best,
>> Thomas
>>
>> Bernd Porr schrieb am Sonntag, 8. August 2021 um 19:03:21 UTC+2:
>>
>>
>> =C2=A0=C2=A0=C2=A0 Hi all,
>>
>> =C2=A0=C2=A0=C2=A0 as most of you know here on the list I embarked on ma=
king dedicated
>> =C2=A0=C2=A0=C2=A0 Linux DAQ boards 15 years ago and they have been part=
 of COEMDI /
>> =C2=A0=C2=A0=C2=A0 Linux. After 15 years now we are no longer manufactur=
ing them but
>> =C2=A0=C2=A0=C2=A0 we've made the PCB designs open source:
>>
>> =C2=A0=C2=A0=C2=A0 https://github.com/glasgowneuro/usbdux
>> =C2=A0=C2=A0=C2=A0 <https://github.com/glasgowneuro/usbdux>
>>
>> =C2=A0=C2=A0=C2=A0 I have still a few USB-DUX-sigma boards without enclo=
sure here.
>> =C2=A0=C2=A0=C2=A0 That's the most recent one. Anybody interested in the=
se please get
>> =C2=A0=C2=A0=C2=A0 in touch.
>>
>> =C2=A0=C2=A0=C2=A0 Best,
>> =C2=A0=C2=A0=C2=A0 /Bernd
>>
>> --=20
>> You received this message because you are subscribed to the Google=20
>> Groups "Comedi: Linux Control and Measurement Device Interface" group.
>> To unsubscribe from this group and stop receiving emails from it,=20
>> send an email to [email protected]=20
>> <mailto:[email protected]>.
>> To view this discussion on the web visit=20
>> https://groups.google.com/d/msgid/comedi_list/eb9b15d9-bd05-4e54-8810-36=
9cce3cf6a3n%40googlegroups.com=20
>> <https://groups.google.com/d/msgid/comedi_list/eb9b15d9-bd05-4e54-8810-3=
69cce3cf6a3n%40googlegroups.com?utm_medium=3Demail&utm_source=3Dfooter>.=20
>>
>
--=20
www:    http://www.berndporr.me.uk
         http://www.tinnitustailor.tech
         http://www.attys.tech
Mobile: +44 (0)7840 340069
Work:   +44 (0)141 330 5237
         University of Glasgow
         School of Engineering
         Rankine Building, Oakfield Avenue,
         Glasgow, G12 8LT

--=20
You received this message because you are subscribed to the Google Groups "=
Comedi: Linux Control and Measurement Device Interface" group.
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/=
comedi_list/14d075b4-746b-97eb-46c1-a4838791b5fe%40berndporr.me.uk.