Re: [comedi] ni_pcimio does not support attach using comedi_config

On 04/07/2023 01:22, R Smith wrote:
> Hello Ian,
> 
> Thank you very much for the response. I have removed the git repo 
> version of comedi and am using the linux kernel one. Here is the output 
> of "sudo modinfo --filename comedi ni_pcimio" now:
> 
> $ sudo modinfo --filename comedi ni_pcimio
> /lib/modules/4.4.0-210-generic/kernel/drivers/staging/comedi/comedi.ko
> /lib/modules/4.4.0-210-generic/kernel/drivers/staging/comedi/drivers/ni_pcimio.ko
> 
> Here is a more verbose output of lspci; it still doesn't seem to be 
> detecting the PCI. Do you have any recommendations on how to debug this 
> and where to start? Do you think it is a hardware issue, or is something 
> going wrong on the software side with comedi? Also, because you said the 
> linux version of comedi doesn't support manual configuration anymore, 
> does that mean there is no need to run comedi_config and the pci should 
> automatically configure itself?

Yes, it should load automatically configure itself.  Sorry, I do not 
know why the PCI device is not detected, but it's nothing to do with 
comedi.  Do you have another PC with a different motherboard to test it 
with, at least as far as getting it listed by lspci?

-- 
-=( Ian Abbott <[email protected]> || MEV Ltd. is a company  )=-
-=( registered in England & Wales.  Regd. number: 02862268.  )=-
-=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
-=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || www.mev.co.uk )=-

-- 
You received this message because you are subscribed to the Google Groups "Comedi: Linux Control and Measurement Device Interface" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/comedi_list/468877c1-531b-c12d-67bf-5bbea2377117%40mev.co.uk.