[comedi] NI AT-MIO 16 XE 10 on Slackware 15

------=_Part_123396_588662739.1703474412390
Content-Type: multipart/alternative; 
	boundary="----=_Part_123397_325175537.1703474412390"

------=_Part_123397_325175537.1703474412390
Content-Type: text/plain; charset="UTF-8"

Hello,

I am experimenting with a VERY old (> 20 years) system, AMD Athlon XP 1700+ 
32 bit with subject ISA card. Have recompiled stock 32 bit smp Slackware 15 
kernel to include the kernel's comedi module. At end of boot, dmesg shows 
that the card is recognized, but neither comedi nor ni_atmio module are 
loaded.

Have specified "options comedi comedi_num_legacy_minors=4" in 
"/etc/modpobe.d/comedi.conf", and running "modprobe ni_atmio" loads the 
"ni_atmio" module as well as the "comedi" module, as verified by "lsmod". 
Also, "dev/comedi0" through "/dev/comedi3" show up on "ls -al /dev", with 
"crw------- 1 root root 98, 0 ...". Makes me think all is well.

However, "comedi_config /dev/comedi0 ni_atmio" results in "Configure 
failed!" No such device\nCheck kernel log for more information\nPossible 
reasons for failure: Unknown". And "dmesg" just shows "comedi: version 
0.7.76 - http://www.comedi.org".

Doing all of the above as root (for now, just to get it going - hoping to 
generate appropriate group later on).

Am at my wit's end, after scouring web all day for solutions. Any help 
would be MUCH appreciated! BONUS: Any hint as to how the above could 
eventually be automated to happen at boot would be awesome! I suppose 
"/sbin/modprobe ni-atmio" and "comedi_config /dev/comedi0 ni_atmio" in 
"/etc/rc.d/rc.modules.local" might be a start?

Thanks,

Matt Koch

-- 
You received this message because you are subscribed to the Google Groups "Comedi: Linux Control and Measurement Device Interface" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/comedi_list/a12f1bff-f4f6-4a64-a433-db287008c0f8n%40googlegroups.com.

------=_Part_123397_325175537.1703474412390
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable

<div>Hello,</div><div><br /></div><div>I am experimenting with a VERY old (=
&gt; 20 years) system, AMD Athlon XP 1700+ 32 bit with subject ISA card. Ha=
ve recompiled stock 32 bit smp Slackware 15 kernel to include the kernel's =
comedi module. At end of boot, dmesg shows that the card is recognized, but=
 neither comedi nor ni_atmio module are loaded.<br /></div><div><br /></div=
><div>Have specified "options comedi comedi_num_legacy_minors=3D4" in "/etc=
/modpobe.d/comedi.conf", and running "modprobe ni_atmio" loads the "ni_atmi=
o" module as well as the "comedi" module, as verified by "lsmod". Also, "de=
v/comedi0" through "/dev/comedi3" show up on "ls -al /dev", with "crw------=
- 1 root root 98, 0 ...". Makes me think all is well.<br /></div><div><br /=
></div><div>However, "comedi_config /dev/comedi0 ni_atmio" results in "Conf=
igure failed!" No such device\nCheck kernel log for more information\nPossi=
ble reasons for failure: Unknown". And "dmesg" just shows "comedi: version =
0.7.76 - http://www.comedi.org".</div><div><br /></div><div>Doing all of th=
e above as root (for now, just to get it going - hoping to generate appropr=
iate group later on).</div><div><br /></div><div>Am at my wit's end, after =
scouring web all day for solutions. Any help would be MUCH appreciated! BON=
US: Any hint as to how the above could eventually be automated to happen at=
 boot would be awesome! I suppose "/sbin/modprobe ni-atmio" and "comedi_con=
fig /dev/comedi0 ni_atmio" in "/etc/rc.d/rc.modules.local" might be a start=
?<br /></div><div><br /></div><div>Thanks,</div><div><br /></div><div>Matt =
Koch<br /></div>

<p></p>

-- <br />
You received this message because you are subscribed to the Google Groups &=
quot;Comedi: Linux Control and Measurement Device Interface&quot; group.<br=
 />
To unsubscribe from this group and stop receiving emails from it, send an e=
mail to <a href=3D"mailto:[email protected]">comedi_=
[email protected]</a>.<br />
To view this discussion on the web visit <a href=3D"https://groups.google.c=
om/d/msgid/comedi_list/a12f1bff-f4f6-4a64-a433-db287008c0f8n%40googlegroups=
.com?utm_medium=3Demail&utm_source=3Dfooter">https://groups.google.com/d/ms=
gid/comedi_list/a12f1bff-f4f6-4a64-a433-db287008c0f8n%40googlegroups.com</a=
>.<br />

------=_Part_123397_325175537.1703474412390--

------=_Part_123396_588662739.1703474412390--