Bug#1143632: xserver-xorg-core: SIGSEGV on unplug of hotplug-re-added DisplayLink (udl) GPU

Michael Boykinov <[email protected]>
Newsgroups gmane.linux.debian.devel.x
Organization sysfive.com GmbH
Message-ID <f885e5eafe69558a370db585d9a6b40fa16bdd0e.camel__8931.13767249218$1785917868$gmane$org@sysfive.com> 
Package: xserver-xorg-core
Version: 2:21.1.16-1.3+deb13u3
Severity: important
Tags: upstream fixed-upstream

Dear Debian Team,

On a kiosk system (Intel i915 primary, DisplayLink gen1 / udl secondary
driven via reverse PRIME), Xorg segfaults at address 0x0 when the USB
display is unplugged, re-plugged, and unplugged again. The first unplug
(boot-probed GPU screen) is handled cleanly; removing the GPU screen
that was re-created via hotplug crashes the server:

  [Xorg.0.log excerpt: "xf86: remove device 1 ..." → "(EE) Segmentation
   fault at address 0x0" — log attached]

Fixed upstream on the 21.1 stable branch (shipped in 21.1.23, already
in
unstable) via MR
https://gitlab.freedesktop.org/xorg/xserver/-/merge_requests/2146:
  - 1443fd34 "randr: clear primary screen's primaryOutput when the
    output is deleted" (use-after-free on DisplayLink GPU unplug)
  - 75d70612 / 907c5019 (xf86CompatOutput NULL guards)

The affected files are otherwise identical between 21.1.16 and 21.1.23,
so the cherry-picks apply cleanly.

Please consider these for a trixie point release — this crash takes
down production point-of-sale terminals on a cable disconnect.

Regards

Michael


-- 
Michael Boykinov
sysfive.com GmbH
Sachsenstraße 20
D-20097 Hamburg


Fax: +49-40-57309193
Cell: +49-(0)151-10499954

Geschaeftsfuehrender Gesellschafter: Gregor Binder | Amtsgericht
Hamburg: HRB 75948 | USt.ID.: DE209657974
Die Informationen in dieser E-Mail sind vertraulich und nur fuer den
oben angegebenen Adressatenkreis bestimmt.
Wir weisen darauf hin, dass jede Form der Veroeffentlichung,
Vervielfaeltigung sowie Weitergabe des Inhalts untersagt ist.

The information contained in this E-Mail is confidental and intended
only for the use of the individual or entity named above.
You are hereby notified that any dissemination, distribution or copying
of this E-Mail is strictly prohibit
xorg.0.log (text/plain, 42.8 KB) 
[355241.362] 
X.Org X Server 1.21.1.16
X Protocol Version 11, Revision 0
[355241.362] Current Operating System: Linux DXXXX 6.12.96+deb13-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.12.96-1 (2026-07-20) x86_64
[355241.362] Kernel command line: quiet splash loglevel=3 rd.udev.log_level=3 systemd.show_status=false ipv6.disable=1
[355241.362] xorg-server 2:21.1.16-1.3+deb13u3 (https://www.debian.org/support) 
[355241.362] Current version of pixman: 0.44.0
[355241.362] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[355241.362] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[355241.362] (==) Log file: "/data/home/kiosk/.local/share/xorg/Xorg.0.log", Time: Tue Aug  4 08:44:08 2026
[355241.362] (==) Using config directory: "/etc/X11/xorg.conf.d"
[355241.362] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[355241.362] (==) ServerLayout "DefaultLayout"
[355241.362] (==) No screen section available. Using defaults.
[355241.362] (**) |-->Screen "Default Screen Section" (0)
[355241.362] (**) |   |-->Monitor "<default monitor>"
[355241.363] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[355241.363] (**) |   |-->Device "intel"
[355241.363] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[355241.363] (**) Option "BlankTime" "0"
[355241.363] (**) Option "StandbyTime" "0"
[355241.363] (**) Option "SuspendTime" "0"
[355241.363] (**) Option "OffTime" "0"
[355241.363] (**) Allowing byte-swapped clients
[355241.363] (==) Automatically adding devices
[355241.363] (==) Automatically enabling devices
[355241.363] (==) Automatically adding GPU devices
[355241.363] (==) Automatically binding GPU devices
[355241.363] (==) Max clients allowed: 256, resource mask: 0x1fffff
[355241.363] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[355241.363] 	Entry deleted from font path.
[355241.363] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
[355241.363] (==) ModulePath set to "/usr/lib/xorg/modules"
[355241.363] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[355241.363] (II) Loader magic: 0x562324b55f00
[355241.363] (II) Module ABI versions:
[355241.363] 	X.Org ANSI C Emulation: 0.4
[355241.363] 	X.Org Video Driver: 25.2
[355241.363] 	X.Org XInput driver : 24.4
[355241.363] 	X.Org Server Extension : 10.0
[355241.363] (++) using VT number 1

[355241.364] (EE) systemd-logind: failed to get session: PID 128851 does not belong to any known session
[355241.366] (II) xfree86: Adding drm device (/dev/dri/card0)
[355241.366] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[355241.374] (II) xfree86: Adding drm device (/dev/dri/card1)
[355241.374] (II) Platform probe for /sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.2/3-3.4.2:1.0/drm/card1
[355241.394] (--) PCI:*(0@0:2:0) 8086:a721:8086:2212 rev 4, Mem @ 0x6000000000/16777216, 0x4000000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[355241.394] (II) LoadModule: "glx"
[355241.394] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[355241.395] (II) Module glx: vendor="X.Org Foundation"
[355241.395] 	compiled for 1.21.1.16, module version = 1.0.0
[355241.395] 	ABI class: X.Org Server Extension, version 10.0
[355241.395] (II) LoadModule: "modesetting"
[355241.395] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[355241.395] (II) Module modesetting: vendor="X.Org Foundation"
[355241.395] 	compiled for 1.21.1.16, module version = 1.21.1
[355241.395] 	Module class: X.Org Video Driver
[355241.395] 	ABI class: X.Org Video Driver, version 25.2
[355241.395] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[355241.406] (II) modeset(0): using drv /dev/dri/card0
[355241.407] (II) modeset(G0): using drv /dev/dri/card1
[355241.407] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[355241.408] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[355241.408] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[355241.408] (**) modeset(0): Option "PageFlip" "false"
[355241.408] (==) modeset(0): RGB weight 888
[355241.408] (==) modeset(0): Default visual is TrueColor
[355241.408] (II) Loading sub module "glamoregl"
[355241.408] (II) LoadModule: "glamoregl"
[355241.408] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[355241.410] (II) Module glamoregl: vendor="X.Org Foundation"
[355241.410] 	compiled for 1.21.1.16, module version = 1.0.1
[355241.410] 	ABI class: X.Org ANSI C Emulation, version 0.4
[355241.443] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) Graphics (RPL-U)
[355241.443] (II) modeset(0): glamor initialized
[355241.443] (==) modeset(0): VariableRefresh: disabled
[355241.443] (==) modeset(0): AsyncFlipSecondaries: disabled
[355242.286] (II) modeset(0): Output DP-1 has no monitor section
[355242.301] (II) modeset(0): Output HDMI-1 has no monitor section
[355242.301] (II) modeset(0): Output DP-2 has no monitor section
[355242.301] (II) modeset(0): Output DP-3 has no monitor section
[355243.155] (II) modeset(0): EDID for output DP-1
[355243.169] (II) modeset(0): EDID for output HDMI-1
[355243.169] (II) modeset(0): Manufacturer: BEA  Model: 2271  Serial#: 5534087
[355243.169] (II) modeset(0): Year: 2015  Week: 0
[355243.169] (II) modeset(0): EDID Version: 1.3
[355243.169] (II) modeset(0): Digital Display Input
[355243.169] (II) modeset(0): Max Image Size [cm]: horiz.: 30  vert.: 23
[355243.169] (II) modeset(0): Gamma: 2.20
[355243.169] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[355243.169] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[355243.169] (II) modeset(0): First detailed timing is preferred mode
[355243.169] (II) modeset(0): redX: 0.627 redY: 0.348   greenX: 0.338 greenY: 0.589
[355243.169] (II) modeset(0): blueX: 0.149 blueY: 0.078   whiteX: 0.312 whiteY: 0.328
[355243.169] (II) modeset(0): Supported established timings:
[355243.169] (II) modeset(0): 720x400@70Hz
[355243.169] (II) modeset(0): 640x480@60Hz
[355243.169] (II) modeset(0): 640x480@72Hz
[355243.169] (II) modeset(0): 640x480@75Hz
[355243.169] (II) modeset(0): 800x600@60Hz
[355243.169] (II) modeset(0): 800x600@72Hz
[355243.169] (II) modeset(0): 800x600@75Hz
[355243.169] (II) modeset(0): 1024x768@60Hz
[355243.169] (II) modeset(0): 1024x768@70Hz
[355243.169] (II) modeset(0): 1024x768@75Hz
[355243.169] (II) modeset(0): Manufacturer's mask: 0
[355243.169] (II) modeset(0): Supported detailed timing:
[355243.169] (II) modeset(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
[355243.169] (II) modeset(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[355243.169] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[355243.169] (II) modeset(0): Monitor name: CL1585BT-DVI
[355243.169] (II) modeset(0): Ranges: V min: 50 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 105 MHz
[355243.169] (II) modeset(0): Serial No: 547187
[355243.169] (II) modeset(0): EDID (in hex):
[355243.169] (II) modeset(0): 	00ffffffffffff0008a1712287715400
[355243.169] (II) modeset(0): 	00190103e01e1778ea8b40a059569626
[355243.169] (II) modeset(0): 	145054adce0001010101010101010101
[355243.169] (II) modeset(0): 	01010101010164190040410026301888
[355243.169] (II) modeset(0): 	360030e410000018000000fc00434c31
[355243.169] (II) modeset(0): 	35383542542d4456490a000000fd0032
[355243.169] (II) modeset(0): 	4c1f500a000a202020202020000000ff
[355243.169] (II) modeset(0): 	003534373138370a2020202020200096
[355243.169] (II) modeset(0): Printing probed modes for output HDMI-1
[355243.169] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355243.169] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355243.169] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355243.169] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[355243.169] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355243.169] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355243.169] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355243.169] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355243.169] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355243.169] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355243.169] (II) modeset(0): EDID for output DP-2
[355243.170] (II) modeset(0): EDID for output DP-3
[355243.170] (II) modeset(0): Output DP-1 disconnected
[355243.170] (II) modeset(0): Output HDMI-1 connected
[355243.170] (II) modeset(0): Output DP-2 disconnected
[355243.170] (II) modeset(0): Output DP-3 disconnected
[355243.170] (II) modeset(0): Using exact sizes for initial modes
[355243.170] (II) modeset(0): Output HDMI-1 using initial mode 1024x768 +0+0
[355243.170] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[355243.170] (==) modeset(0): DPI set to (96, 96)
[355243.170] (II) Loading sub module "fb"
[355243.170] (II) LoadModule: "fb"
[355243.170] (II) Module "fb" already built-in
[355243.170] (II) modeset(G0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 16/16
[355243.170] (==) modeset(G0): Depth 16, (==) framebuffer bpp 16
[355243.170] (==) modeset(G0): RGB weight 565
[355243.170] (==) modeset(G0): Default visual is TrueColor
[355243.170] (II) Loading sub module "glamoregl"
[355243.170] (II) LoadModule: "glamoregl"
[355243.170] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[355243.170] (II) Module glamoregl: vendor="X.Org Foundation"
[355243.170] 	compiled for 1.21.1.16, module version = 1.0.1
[355243.170] 	ABI class: X.Org ANSI C Emulation, version 0.4
[355243.181] (II) modeset(G0): Refusing to try glamor on llvmpipe
[355243.183] (II) modeset(G0): glamor initialization failed
[355243.183] (II) modeset(G0): ShadowFB: preferred NO, enabled NO
[355243.275] (II) modeset(G0): Output VGA-1-1 has no monitor section
[355243.369] (II) modeset(G0): EDID for output VGA-1-1
[355243.369] (II) modeset(G0): Manufacturer: STK  Model: 7014  Serial#: 242012
[355243.369] (II) modeset(G0): Year: 2015  Week: 27
[355243.369] (II) modeset(G0): EDID Version: 1.3
[355243.369] (II) modeset(G0): Digital Display Input
[355243.369] (II) modeset(G0): Max Image Size [cm]: horiz.: 17  vert.: 13
[355243.369] (II) modeset(G0): Gamma: 2.20
[355243.369] (II) modeset(G0): DPMS capabilities: StandBy Suspend
[355243.369] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[355243.369] (II) modeset(G0): First detailed timing is preferred mode
[355243.369] (II) modeset(G0): redX: 0.560 redY: 0.329   greenX: 0.349 greenY: 0.590
[355243.369] (II) modeset(G0): blueX: 0.149 blueY: 0.794   whiteX: 0.329 whiteY: 0.328
[355243.369] (II) modeset(G0): Manufacturer's mask: 0
[355243.369] (II) modeset(G0): Supported detailed timing:
[355243.369] (II) modeset(G0): clock: 46.0 MHz   Image Size:  170 x 128 mm
[355243.369] (II) modeset(G0): h_active: 800  h_sync: 912  h_sync_end 913 h_blank_end 953 h_border: 0
[355243.369] (II) modeset(G0): v_active: 600  v_sync: 613  v_sync_end 616 v_blanking: 645 v_border: 0
[355243.369] (II) modeset(G0): Ranges: V min: 55 V max: 80 Hz, H min: 24 H max: 49 kHz, PixClock max 55 MHz
[355243.369] (II) modeset(G0): Monitor name: HSD084ISN1
[355243.369] (II) modeset(G0): EDID (in hex):
[355243.369] (II) modeset(G0): 	00ffffffffffff004e8b14705cb10300
[355243.369] (II) modeset(G0): 	1b19010380110d78ca54548f54599726
[355243.369] (II) modeset(G0): 	cb545400000001010101010101010101
[355243.369] (II) modeset(G0): 	010101010101f811209930582d207001
[355243.369] (II) modeset(G0): 	d300aa8000000018000000fd00375018
[355243.369] (II) modeset(G0): 	3105000a202020202020000000fc0048
[355243.369] (II) modeset(G0): 	534430383449534e310a0a0a00000010
[355243.369] (II) modeset(G0): 	000000000000000000000000000000e4
[355243.369] (II) modeset(G0): Printing probed modes for output VGA-1-1
[355243.369] (II) modeset(G0): Modeline "800x600"x74.8   46.00  800 912 913 953  600 613 616 645 -hsync -vsync (48.3 kHz eP)
[355243.369] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[355243.369] (==) modeset(G0): DPI set to (96, 96)
[355243.369] (II) Loading sub module "fb"
[355243.369] (II) LoadModule: "fb"
[355243.369] (II) Module "fb" already built-in
[355243.389] (==) modeset(0): Backing store enabled
[355243.389] (==) modeset(0): Silken mouse enabled
[355243.524] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[355243.524] (==) modeset(0): DPMS enabled
[355243.524] (II) modeset(0): [DRI2] Setup complete
[355243.524] (II) modeset(0): [DRI2]   DRI driver: iris
[355243.524] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[355243.524] (==) modeset(G0): Backing store enabled
[355243.524] (==) modeset(G0): Silken mouse enabled
[355243.524] (II) modeset(G0): Initializing kms color map for depth 16, 6 bpc.
[355243.525] (==) modeset(G0): DPMS enabled
[355243.525] (II) Initializing extension Generic Event Extension
[355243.525] (II) Initializing extension SHAPE
[355243.525] (II) Initializing extension MIT-SHM
[355243.525] (II) Initializing extension XInputExtension
[355243.526] (II) Initializing extension XTEST
[355243.526] (II) Initializing extension BIG-REQUESTS
[355243.526] (II) Initializing extension SYNC
[355243.527] (II) Initializing extension XKEYBOARD
[355243.527] (II) Initializing extension XC-MISC
[355243.527] (II) Initializing extension SECURITY
[355243.527] (II) Initializing extension XFIXES
[355243.527] (II) Initializing extension RENDER
[355243.527] (II) Initializing extension RANDR
[355243.528] (II) Initializing extension COMPOSITE
[355243.528] (II) Initializing extension DAMAGE
[355243.528] (II) Initializing extension MIT-SCREEN-SAVER
[355243.528] (II) Initializing extension DOUBLE-BUFFER
[355243.529] (II) Initializing extension RECORD
[355243.529] (II) Initializing extension DPMS
[355243.529] (II) Initializing extension Present
[355243.529] (II) Initializing extension DRI3
[355243.529] (II) Initializing extension X-Resource
[355243.529] (II) Initializing extension XVideo
[355243.529] (II) Initializing extension XVideo-MotionCompensation
[355243.529] (II) Initializing extension SELinux
[355243.529] (II) SELinux: Disabled on system
[355243.529] (II) Initializing extension GLX
[355243.534] (II) AIGLX: Loaded and initialized iris
[355243.535] (II) GLX: Initialized DRI2 GL provider for screen 0
[355243.535] (II) Initializing extension XFree86-VidModeExtension
[355243.535] (II) Initializing extension XFree86-DGA
[355243.535] (II) Initializing extension XFree86-DRI
[355243.535] (II) Initializing extension DRI2
[355243.535] (II) modeset(G0): Damage tracking initialized
[355243.536] (II) modeset(0): Damage tracking initialized
[355243.536] (II) modeset(0): Setting screen physical size to 270 x 203
[355243.562] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[355243.562] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[355243.562] (II) LoadModule: "libinput"
[355243.562] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[355243.563] (II) Module libinput: vendor="X.Org Foundation"
[355243.563] 	compiled for 1.21.1.15, module version = 1.5.0
[355243.563] 	Module class: X.Org XInput Driver
[355243.563] 	ABI class: X.Org XInput driver, version 24.4
[355243.563] (II) Using input driver 'libinput' for 'Power Button'
[355243.563] (**) Power Button: always reports core events
[355243.563] (**) Option "Device" "/dev/input/event2"
[355243.564] (II) event2  - Power Button: is tagged by udev as: Keyboard
[355243.564] (II) event2  - Power Button: device is a keyboard
[355243.564] (II) event2  - Power Button: device removed
[355243.588] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[355243.588] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[355243.588] (**) Option "xkb_model" "pc105"
[355243.588] (**) Option "xkb_layout" "us"
[355243.589] (II) event2  - Power Button: is tagged by udev as: Keyboard
[355243.589] (II) event2  - Power Button: device is a keyboard
[355243.590] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[355243.590] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[355243.590] (II) Using input driver 'libinput' for 'Video Bus'
[355243.590] (**) Video Bus: always reports core events
[355243.590] (**) Option "Device" "/dev/input/event4"
[355243.591] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[355243.591] (II) event4  - Video Bus: device is a keyboard
[355243.591] (II) event4  - Video Bus: device removed
[355243.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[355243.636] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[355243.636] (**) Option "xkb_model" "pc105"
[355243.636] (**) Option "xkb_layout" "us"
[355243.638] (II) event4  - Video Bus: is tagged by udev as: Keyboard
[355243.638] (II) event4  - Video Bus: device is a keyboard
[355243.639] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[355243.639] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[355243.639] (II) Using input driver 'libinput' for 'Power Button'
[355243.639] (**) Power Button: always reports core events
[355243.639] (**) Option "Device" "/dev/input/event1"
[355243.640] (II) event1  - Power Button: is tagged by udev as: Keyboard
[355243.640] (II) event1  - Power Button: device is a keyboard
[355243.640] (II) event1  - Power Button: device removed
[355243.664] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[355243.664] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[355243.664] (**) Option "xkb_model" "pc105"
[355243.664] (**) Option "xkb_layout" "us"
[355243.666] (II) event1  - Power Button: is tagged by udev as: Keyboard
[355243.666] (II) event1  - Power Button: device is a keyboard
[355243.667] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[355243.667] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[355243.667] (II) Using input driver 'libinput' for 'Sleep Button'
[355243.667] (**) Sleep Button: always reports core events
[355243.667] (**) Option "Device" "/dev/input/event0"
[355243.668] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[355243.668] (II) event0  - Sleep Button: device is a keyboard
[355243.668] (II) event0  - Sleep Button: device removed
[355243.684] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[355243.684] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[355243.684] (**) Option "xkb_model" "pc105"
[355243.684] (**) Option "xkb_layout" "us"
[355243.686] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[355243.686] (II) event0  - Sleep Button: device is a keyboard
[355243.688] (II) config/udev: Adding input device Baanto SDW-150S0-M5T-XXX-XX-PRD (/dev/input/event9)
[355243.688] (**) Baanto SDW-150S0-M5T-XXX-XX-PRD: Applying InputClass "libinput touchscreen catchall"
[355243.688] (II) Using input driver 'libinput' for 'Baanto SDW-150S0-M5T-XXX-XX-PRD'
[355243.688] (**) Baanto SDW-150S0-M5T-XXX-XX-PRD: always reports core events
[355243.688] (**) Option "Device" "/dev/input/event9"
[355243.747] (II) event9  - Baanto SDW-150S0-M5T-XXX-XX-PRD: is tagged by udev as: Touchscreen
[355243.747] (II) event9  - Baanto SDW-150S0-M5T-XXX-XX-PRD: device is a touch device
[355243.747] (II) event9  - Baanto SDW-150S0-M5T-XXX-XX-PRD: device removed
[355243.780] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/0003:2453:0100.0005/input/input28/event9"
[355243.780] (II) XINPUT: Adding extended input device "Baanto SDW-150S0-M5T-XXX-XX-PRD" (type: TOUCHSCREEN, id 10)
[355243.780] (**) Option "AccelerationScheme" "none"
[355243.780] (**) Baanto SDW-150S0-M5T-XXX-XX-PRD: (accel) selected scheme none/0
[355243.780] (**) Baanto SDW-150S0-M5T-XXX-XX-PRD: (accel) acceleration factor: 2.000
[355243.780] (**) Baanto SDW-150S0-M5T-XXX-XX-PRD: (accel) acceleration threshold: 4
[355243.838] (II) event9  - Baanto SDW-150S0-M5T-XXX-XX-PRD: is tagged by udev as: Touchscreen
[355243.839] (II) event9  - Baanto SDW-150S0-M5T-XXX-XX-PRD: device is a touch device
[355243.840] (II) config/udev: Adding input device Baanto SDW-150S0-M5T-XXX-XX-PRD (/dev/input/mouse0)
[355243.840] (II) No input driver specified, ignoring this device.
[355243.840] (II) This device may have been added with another device file.
[355243.841] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           (/dev/input/event10)
[355243.841] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : Applying InputClass "libinput touchscreen catchall"
[355243.841] (II) Using input driver 'libinput' for 'eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          '
[355243.841] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : always reports core events
[355243.841] (**) Option "Device" "/dev/input/event10"
[355243.898] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : is tagged by udev as: Touchscreen
[355243.899] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : device is a touch device
[355243.900] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : device removed
[355243.952] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1:1.0/0003:0EEF:7201.0008/input/input40/event10"
[355243.952] (II) XINPUT: Adding extended input device "eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          " (type: TOUCHSCREEN, id 11)
[355243.952] (**) Option "AccelerationScheme" "none"
[355243.952] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : (accel) selected scheme none/0
[355243.952] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : (accel) acceleration factor: 2.000
[355243.952] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : (accel) acceleration threshold: 4
[355244.011] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : is tagged by udev as: Touchscreen
[355244.012] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : device is a touch device
[355244.013] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           (/dev/input/mouse1)
[355244.014] (II) No input driver specified, ignoring this device.
[355244.014] (II) This device may have been added with another device file.
[355244.014] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen (/dev/input/event11)
[355244.014] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen: Applying InputClass "libinput tablet catchall"
[355244.014] (II) Using input driver 'libinput' for 'eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen'
[355244.014] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen: always reports core events
[355244.014] (**) Option "Device" "/dev/input/event11"
[355244.015] (II) event11 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen: is tagged by udev as: Tablet
[355244.028] (II) event11 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen: device "eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen" (0eef:7201) is not known to libwacom
[355244.028] (EE) event11 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen: libinput bug: missing tablet capabilities: resolution. Ignoring this device.
[355244.028] (II) event11 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen: device is a tablet
[355244.084] (II) event11 - failed to create input device '/dev/input/event11'.
[355244.084] (EE) libinput: eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen: Failed to create a device for /dev/input/event11
[355244.084] (EE) PreInit returned 2 for "eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen"
[355244.084] (II) UnloadModule: "libinput"
[355244.088] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           Touchscreen (/dev/input/mouse2)
[355244.088] (II) No input driver specified, ignoring this device.
[355244.088] (II) This device may have been added with another device file.
[355244.089] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[355244.089] (II) No input driver specified, ignoring this device.
[355244.089] (II) This device may have been added with another device file.
[355244.090] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event6)
[355244.090] (II) No input driver specified, ignoring this device.
[355244.090] (II) This device may have been added with another device file.
[355244.090] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event7)
[355244.090] (II) No input driver specified, ignoring this device.
[355244.090] (II) This device may have been added with another device file.
[355244.090] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event8)
[355244.090] (II) No input driver specified, ignoring this device.
[355244.090] (II) This device may have been added with another device file.
[355244.091] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[355244.091] (II) No input driver specified, ignoring this device.
[355244.091] (II) This device may have been added with another device file.
[355244.157] (II) config/udev: removing device eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          
[355244.158] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : device removed
[355244.196] (II) UnloadModule: "libinput"
[355244.197] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC7200-76F5v1.001           (/dev/input/event10)
[355244.197] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : Applying InputClass "libinput touchscreen catchall"
[355244.197] (II) Using input driver 'libinput' for 'eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          '
[355244.197] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : always reports core events
[355244.197] (**) Option "Device" "/dev/input/event10"
[355244.255] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : is tagged by udev as: Touchscreen
[355244.256] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : device is a touch device
[355244.257] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : device removed
[355244.308] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.4/3-3.4.1/3-3.4.1:1.0/0003:0EEF:7201.0008/input/input40/event10"
[355244.308] (II) XINPUT: Adding extended input device "eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          " (type: TOUCHSCREEN, id 11)
[355244.308] (**) Option "AccelerationScheme" "none"
[355244.308] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : (accel) selected scheme none/0
[355244.308] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : (accel) acceleration factor: 2.000
[355244.308] (**) eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : (accel) acceleration threshold: 4
[355244.366] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : is tagged by udev as: Touchscreen
[355244.367] (II) event10 - eGalax Inc. eGalaxTouch EXC7200-76F5v1.001          : device is a touch device
[355245.273] (II) modeset(0): EDID vendor "BEA", prod id 8817
[355245.273] (II) modeset(0): Using EDID range info for horizontal sync
[355245.273] (II) modeset(0): Using EDID range info for vertical refresh
[355245.273] (II) modeset(0): Printing DDC gathered Modelines:
[355245.273] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355245.273] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355245.273] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355245.273] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355245.273] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355245.273] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355245.273] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355245.273] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355245.273] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355245.273] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[355246.139] (II) modeset(0): EDID vendor "BEA", prod id 8817
[355246.140] (II) modeset(0): Using hsync ranges from config file
[355246.140] (II) modeset(0): Using vrefresh ranges from config file
[355246.140] (II) modeset(0): Printing DDC gathered Modelines:
[355246.140] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355246.140] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355246.140] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355246.140] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355246.140] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355246.140] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355246.140] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355246.140] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355246.140] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355246.140] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[355247.156] (II) modeset(0): EDID vendor "BEA", prod id 8817
[355247.156] (II) modeset(0): Using hsync ranges from config file
[355247.156] (II) modeset(0): Using vrefresh ranges from config file
[355247.156] (II) modeset(0): Printing DDC gathered Modelines:
[355247.156] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355247.156] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355247.156] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355247.156] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355247.156] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355247.156] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355247.156] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355247.156] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355247.156] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355247.156] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[355248.006] (II) modeset(0): EDID vendor "BEA", prod id 8817
[355248.006] (II) modeset(0): Using hsync ranges from config file
[355248.006] (II) modeset(0): Using vrefresh ranges from config file
[355248.006] (II) modeset(0): Printing DDC gathered Modelines:
[355248.006] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355248.006] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355248.006] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355248.006] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355248.006] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355248.006] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355248.006] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355248.006] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355248.006] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355248.006] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[355249.023] (II) modeset(0): EDID vendor "BEA", prod id 8817
[355249.023] (II) modeset(0): Using hsync ranges from config file
[355249.023] (II) modeset(0): Using vrefresh ranges from config file
[355249.023] (II) modeset(0): Printing DDC gathered Modelines:
[355249.023] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355249.023] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355249.023] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355249.023] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355249.023] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355249.023] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355249.023] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355249.023] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355249.023] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355249.023] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[355249.906] (II) modeset(0): EDID vendor "BEA", prod id 8817
[355249.906] (II) modeset(0): Using hsync ranges from config file
[355249.906] (II) modeset(0): Using vrefresh ranges from config file
[355249.906] (II) modeset(0): Printing DDC gathered Modelines:
[355249.906] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355249.906] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355249.906] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355249.906] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355249.906] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355249.906] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355249.906] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355249.906] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355249.906] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355249.906] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[355250.939] (II) modeset(0): EDID vendor "BEA", prod id 8817
[355250.939] (II) modeset(0): Using hsync ranges from config file
[355250.939] (II) modeset(0): Using vrefresh ranges from config file
[355250.939] (II) modeset(0): Printing DDC gathered Modelines:
[355250.939] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355250.939] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355250.939] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355250.939] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355250.939] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355250.939] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355250.939] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355250.939] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355250.939] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355250.939] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[355251.823] (II) modeset(0): EDID vendor "BEA", prod id 8817
[355251.823] (II) modeset(0): Using hsync ranges from config file
[355251.823] (II) modeset(0): Using vrefresh ranges from config file
[355251.823] (II) modeset(0): Printing DDC gathered Modelines:
[355251.823] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355251.823] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355251.823] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355251.823] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355251.823] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355251.823] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355251.823] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355251.823] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355251.823] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355251.823] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[355252.022] (II) modeset(0): Allocate new frame buffer 1824x768 stride
[355252.097] randr: falling back to unsynchronized pixmap sharing
[355319.136] (II) modeset(0): EDID vendor "BEA", prod id 8817
[355319.136] (II) modeset(0): Using hsync ranges from config file
[355319.136] (II) modeset(0): Using vrefresh ranges from config file
[355319.136] (II) modeset(0): Printing DDC gathered Modelines:
[355319.136] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355319.136] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355319.136] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355319.136] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355319.136] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355319.136] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355319.136] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355319.136] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355319.136] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355319.136] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[355320.002] (II) modeset(0): EDID vendor "BEA", prod id 8817
[355320.002] (II) modeset(0): Using hsync ranges from config file
[355320.002] (II) modeset(0): Using vrefresh ranges from config file
[355320.002] (II) modeset(0): Printing DDC gathered Modelines:
[355320.002] (II) modeset(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[355320.002] (II) modeset(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[355320.002] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[355320.002] (II) modeset(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[355320.002] (II) modeset(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[355320.002] (II) modeset(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[355320.002] (II) modeset(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[355320.002] (II) modeset(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[355320.002] (II) modeset(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[355320.002] (II) modeset(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
Xorg.0.log.old (application/x-trash, 2.6 KB) - not displayed
signature.asc (application/pgp-signature, 833 B) 
-----BEGIN PGP SIGNATURE-----
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=zj4K
-----END PGP SIGNATURE-----
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.