distcc 3.1-3.1: Please update debconf PO translation for the package distcc

Christian Perrier <[email protected]>
Newsgroups gmane.linux.debian.internationalization.finnish
Message-ID <[email protected]>
Hi,

A l10n NMU will happen on distcc pretty soon.

A round of translation updates is being launched to give all translators
a chance to get their translations in for that package.

Please send the updated file as a wishlist bug against the package.


The deadline for receiving the updated translation is
Wednesday, March 17, 2010.

Thanks,
fi.po (text/x-gettext, 6.7 KB)
msgid ""
msgstr ""
"Project-Id-Version: distcc\n"
"Report-Msgid-Bugs-To: [email protected]\n"
"POT-Creation-Date: 2010-01-05 23:23+0100\n"
"PO-Revision-Date: 2008-04-25 16:14+0200\n"
"Last-Translator: Esko Arajärvi <[email protected]>\n"
"Language-Team: Finnish <[email protected]>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Poedit-Language: Finnish\n"
"X-Poedit-Country: FINLAND\n"

#. Type: boolean
#. Description
#: ../distcc.templates:1001
msgid "Start the distcc daemon on startup?"
msgstr ""
"Tulisiko distcc-taustaohjelma käynnistää, kun järjestelmä käynnistetään?"

#. Type: boolean
#. Description
#: ../distcc.templates:1001
msgid ""
"distcc can be run as a daemon, listening on port 3632 for incoming "
"connections."
msgstr ""
"distcc voidaan ajaa taustaohjelmana, jolloin se kuuntelee porttiin 3632 "
"tulevia yhteydenottoja."

#. Type: boolean
#. Description
#: ../distcc.templates:1001
msgid ""
"You have the option of starting the distcc daemon automatically on the "
"computer startup. If in doubt, it's advised not to start it automatically on "
"startup. If you later change your mind, you can run: 'dpkg-reconfigure "
"distcc'."
msgstr ""
"distcc-taustaohjelma voidaan käynnistää automaattisesti, kun tietokone "
"käynnistetään. Jos olet epävarma, tätä ei suositella valittavaksi. Asetusta "
"voidaan myöhemmin muuttaa ajamalla komento ”dpkg-reconfigure distcc”."

#. Type: string
#. Description
#: ../distcc.templates:2001
msgid "Allowed client networks:"
msgstr "Sallitut asiakasverkot:"

#. Type: string
#. Description
#: ../distcc.templates:2001
msgid ""
"The distcc daemon implements access control based on the IP address of the "
"client, that is trying to connect. Only the hosts or networks listed here "
"are allowed to connect."
msgstr ""
"distcc-taustaohjelma käyttää yhteyttä ottavan asiakkaan IP-osoitteeseen "
"perustuvaa lupakontrollia. Vain tässä listatut koneet ja verkot saavat ottaa "
"yhteyden."

#. Type: string
#. Description
#: ../distcc.templates:2001
msgid ""
"You can list multiple hosts and/or networks, separated by spaces. Hosts are "
"represented by their IP address, networks have to be in CIDR notation, f.e. "
"\"192.168.1.0/24\"."
msgstr ""
"Usempia koneita tai verkkoja voidaan listata välilyönnein eroteltuina. "
"Koneet listataan IP-osoitteen avulla, verkot CIDR-merkinnällä, esimerkiksi "
"”192.168.1.0/24”."

#. Type: string
#. Description
#: ../distcc.templates:2001
msgid ""
"To change the list at a later point, you can run: 'dpkg-reconfigure distcc'."
msgstr ""
"Listaa voidaan muuttaa myöhemmin ajamalla komento ”dpkg-reconfigure distcc”."

#. Type: string
#. Description
#: ../distcc.templates:3001
msgid "Listen interfaces:"
msgstr "Kuunneltavat liitännät:"

#. Type: string
#. Description
#: ../distcc.templates:3001
msgid "The distcc daemon can be bound to a specific network interface."
msgstr ""
"distcc-taustaohjelma voidaan asettaa kuuntelemaan tiettyä verkkoliitäntää."

#. Type: string
#. Description
#: ../distcc.templates:3001
msgid ""
"You probably want to choose the interface of your local network by entering "
"it's IP address. If distccd should listen on all interfaces, just enter "
"nothing."
msgstr ""
"Todennäköisesti halutaan valita paikallisen verkon liitäntä antamalla sen IP-"
"osoite. Jos distccd:n tulisi kuunnella kaikki liitäntöjä, jätä kenttä "
"tyhjäksi."

#. Type: string
#. Description
#: ../distcc.templates:3001
msgid ""
"Be sure to protect distccd from unauthorized access, by being careful in "
"your choice of the listen interface and allowed networks. distccd should  "
"never be accessible from untrusted networks. If that is needed, secureshell "
"should be used instead of the daemon."
msgstr ""
"Varmista, että distccd on suojattu luvattomalta käytöltä valitsemalla "
"huolellisesti kuunneltavat liitännät ja sallitut verkot. distccd:n ei tulisi "
"koskaan sallia yhteyksiä verkoista, joihin ei luoteta. Jos tällaisia "
"yhteyksiä tarvitaan, tulisi käyttää secureshelliä, eikä taustaohjelmaa."

#. Type: string
#. Description
#: ../distcc.templates:3001
msgid ""
"To change the address at a later point, you can run: 'dpkg-reconfigure "
"distcc'."
msgstr ""
"Osoitetta voidaan vaihtaa myöhemmin ajamalla komento ”dpkg-reconfigure "
"distcc”."

#. Type: string
#. Description
#: ../distcc.templates:4001
msgid "Nice level:"
msgstr "Nice-taso:"

#. Type: string
#. Description
#: ../distcc.templates:4001
msgid ""
"You can start the distcc daemon with a nice level, to give it a low priority "
"compared to other processes. The start script will only accept values "
"between 0 and 20."
msgstr ""
"distcc-taustaohjelma voidaan käynnistää jollain nice-tasolla, jolloin sille "
"annetaan muita prosesseja pienempi prioriteetti. Käynnistyskomentosarja "
"hyväksyy vain arvot välillä 0-20."

#. Type: string
#. Description
#. Type: string
#. Description
#. Type: boolean
#. Description
#: ../distcc.templates:4001 ../distcc.templates:5001 ../distcc.templates:6001
msgid ""
"To change this value at a later point, you can run: 'dpkg-reconfigure "
"distcc'."
msgstr ""
"Tätä arvoa voidaan myöhemmin muuttaa ajamalla komento ”dpkg-reconfigure "
"distcc”."

#. Type: string
#. Description
#: ../distcc.templates:5001
msgid "Maximum number of concurrent jobs:"
msgstr ""

#. Type: string
#. Description
#: ../distcc.templates:5001
msgid ""
"You can tell the distcc daemon to accept a maximum number of jobs at a time. "
"This can be useful on systems that should stay interactive while they serve "
"as a distcc server. Usually, you will want to set this to a value matching "
"or doubling the number of cores on this system."
msgstr ""

#. Type: boolean
#. Description
#: ../distcc.templates:6001
msgid "Enable Zeroconf support?"
msgstr "Otetaanko Zeroconf-tuki käyttöön?"

#. Type: boolean
#. Description
#: ../distcc.templates:6001
#, fuzzy
#| msgid "Enable Zeroconf support?"
msgid "distcc has Zeroconf support."
msgstr "Otetaanko Zeroconf-tuki käyttöön?"

#. Type: boolean
#. Description
#: ../distcc.templates:6001
#, fuzzy
#| msgid ""
#| "If you enable it here, please read /usr/share/doc/distcc/README.Debian to "
#| "learn how clients must be configured to make use of it."
msgid ""
"If you enable it here, please read /usr/share/doc/distcc/README.Debian to "
"learn how clients must be configured to make use of it. Also note, that you "
"need to install the dbus package, if you're going to use Zeroconf."
msgstr ""
"Jos se otetaan käyttöön, lue tiedostosta /usr/share/doc/distcc/README.Debian "
"kuinka asiakasohjelmat tulee asettaa sen käyttämiseksi."

#~ msgid "distcc for Debian has been patched with Zeroconf support."
#~ msgstr "Debianin distcc:hen on lisätty Zeroconf-tuki."
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.