[LCFC] po-debconf://miniupnpd

Camaleón <[email protected]>
Newsgroups gmane.linux.debian.internationalization.spanish
Message-ID <YvKI3nAINOOnl/[email protected]>
Hola,
Adjunto la traducción (sin cambios).
Saludos,
-- 
Camaleón
es.po (text/plain, 5.4 KB)
# miniupnpd translation to Spanish
# Copyright (C) 2013 Software in the Public Interest, SPI Inc.
# This file is distributed under the same license as the miniupnpd package.
#
# Changes:
# - Initial translation
#      Matías Bellone <[email protected]> , 2013
#
#  Traductores, si no conoce el formato PO, merece la pena leer la
#  documentación de gettext, especialmente las secciones dedicadas a este
#  formato, por ejemplo ejecutando:
#         info -n '(gettext)PO Files'
#         info -n '(gettext)Header Entry'
#
# Equipo de traducción al español, por favor lean antes de traducir
# los siguientes documentos:
#
# - El proyecto de traducción de Debian al español
#   http://www.debian.org/intl/spanish/
#   especialmente las notas y normas de traducción en
#   http://www.debian.org/intl/spanish/notas
#
# - La guía de traducción de po's de debconf:
#   /usr/share/doc/po-debconf/README-trans
#   o http://www.debian.org/intl/l10n/po-debconf/README-trans
#
# Si tiene dudas o consultas sobre esta traducción consulte con el último
# traductor (campo Last-Translator) y ponga en copia a la lista de
# traducción de Debian al español (<[email protected]>)
#
msgid ""
msgstr ""
"Project-Id-Version: miniupnpd\n"
"Report-Msgid-Bugs-To: [email protected]\n"
"POT-Creation-Date: 2019-01-06 21:56+0800\n"
"PO-Revision-Date: 2022-08-02 15:38+0200\n"
"Last-Translator: Camaleón <[email protected]>\n"
"Language-Team: Debian L10N Spanish <[email protected]>\n"
"Language: es\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.4.2\n"

#. Type: boolean
#. Description
#: ../miniupnpd.templates:2001
msgid "Start the MiniUPnP daemon automatically?"
msgstr "¿Desea iniciar el demonio MiniUPnP automáticamente?"

#. Type: boolean
#. Description
#: ../miniupnpd.templates:2001
msgid ""
"Choose this option if the MiniUPnP daemon should start automatically, now "
"and at boot time."
msgstr ""
"Seleccione esta opción si desea que el demonio MiniUPnP se inicie "
"automáticamente, ahora y en el arranque del equipo."

#. Type: string
#. Description
#: ../miniupnpd.templates:3001
msgid "Interfaces to listen on for UPnP queries:"
msgstr "Interfaces donde se escucharán las consultas UPnP:"

#. Type: string
#. Description
#: ../miniupnpd.templates:3001
msgid ""
"The MiniUPnP daemon will listen for requests on the local network. Please "
"enter the interfaces or IP addresses it should listen on, separated by space."
msgstr ""
"El demonio MiniUPnP escuchará consultas en la red local. Introduzca las "
"interfaces o las direcciones IP que deberían utilizarse para escuchar estas "
"peticiones."

#. Type: string
#. Description
#: ../miniupnpd.templates:3001
msgid ""
"Interface names are preferred, and required if you plan to enable IPv6 port "
"forwarding."
msgstr ""
"Es preferible que utilice los nombres de las interfaces, y de uso obligado "
"si desea activar el reenvío de puertos IPv6."

#. Type: string
#. Description
#: ../miniupnpd.templates:4001
msgid "External WAN network interface to open ports on:"
msgstr "Interfaz de red externa («WAN») donde abrir los puertos:"

#. Type: string
#. Description
#: ../miniupnpd.templates:4001
msgid ""
"The MiniUPnP daemon will listen on a specific IP address on the local "
"network, then open ports on the WAN interface. Please enter the name of the "
"WAN network interface on which the MiniUPnP daemon should perform port "
"forwarding."
msgstr ""
"El demonio MiniUPnP escuchará en una dirección IP específica de la red local "
"y abrirá los puertos en la interfaz externa («WAN»). Introduzca el nombre de "
"la interfaz de red externa («WAN») donde el demonio MiniUPnP debería "
"realizar la redirección de puertos.puertos."

#. Type: boolean
#. Description
#: ../miniupnpd.templates:5001
msgid "Enable IPv6 firewall chain?"
msgstr "¿Desea activar la cadena IPv6 del cortafuegos?"

#. Type: boolean
#. Description
#: ../miniupnpd.templates:5001
msgid ""
"Please specify whether the MiniUPnP daemon should run its ip6tables script "
"on startup to initialize the IPv6 firewall chain."
msgstr ""
"Especifique si el demonio MiniUPnP debe ejecutar su script de ip6tables al "
"arrancar para inicializar la cadena IPv6 del cortafuegos."

#. Type: boolean
#. Description
#: ../miniupnpd.templates:5001
msgid ""
"Note: This option is useless if you don't block any IPv6 forwarded traffic."
msgstr ""
"Nota: Esta opción es inútil si no se bloquea el tráfico reenviado IPv6."

#. Type: boolean
#. Description
#: ../miniupnpd.templates:6001
msgid "Force reporting IGDv1 in rootDesc?"
msgstr "¿Desea forzar la notificación de IGDv1 en rootDesc?"

#. Type: boolean
#. Description
#: ../miniupnpd.templates:6001
msgid ""
"Some IGD clients (most notably Microsoft® Windows® BITS) look for IGDv1 and "
"do not recognize IGDv2 as a valid IGD service. This option will fool them by "
"pretending itself to be IGDv1."
msgstr ""
"Algunos clientes IGD (particularmente Microsoft® Windows® BITS) buscan IGDv1 "
"y no reconocen IGDv2 como un servicio IGD válido. Esta opción les engañará "
"haciéndose pasar por IGDv1."

#. Type: boolean
#. Description
#: ../miniupnpd.templates:6001
msgid ""
"Of course you will lose IGDv2 functions (notably IPv6 support) by enabling "
"this."
msgstr ""
"Por supuesto, al activar esta opción ya no estarán disponibles las funciones "
"IGDv2 (concretamente, el soporte IPv6)."
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.