Re: configuring the network under knoppix

Christian Perle <[email protected]>
Newsgroups gmane.linux.debian.knoppix
Organization Silmor
Message-ID <[email protected]>
Hi Joris,

On Sat, Apr 17, 2004 at 21:15:51 +0200, Joris Huizer wrote:

> I tried this but it didn't really help. I got some output from the 
> tcpdump but it ended with "network is down"

Did you also try "pump -i eth0" before tcpdump?

> I forgot to tell you my adsl connection is over dhcp. relevant data from 
> the boot log on this other computer:
> 
> Sat Apr 17 21:00:29 2004: For info, please visit 
> http://www.isc.org/dhcp-contrib.html
> Sat Apr 17 21:00:29 2004:
> Sat Apr 17 21:00:30 2004: Listening on LPF/eth0/00:80:ad:75:b5:88
> Sat Apr 17 21:00:30 2004: Sending on   LPF/eth0/00:80:ad:75:b5:88
> Sat Apr 17 21:00:30 2004: Sending on   Socket/fallback/fallback-net
> Sat Apr 17 21:00:31 2004: DHCPDISCOVER on eth0 to 255.255.255.255 port 
> 67 interval 4
> Sat Apr 17 21:00:31 2004: receive_packet failed on eth0: Network is down

This looks like a driver problem with your ethernet card or a bad
cable.

> Sat Apr 17 21:00:33 2004: DHCPDISCOVER on eth0 to 255.255.255.255 port 
> 67 interval 5
> Sat Apr 17 21:00:38 2004: DHCPDISCOVER on eth0 to 255.255.255.255 port 
> 67 interval 13
> Sat Apr 17 21:00:51 2004: DHCPDISCOVER on eth0 to 255.255.255.255 port 
> 67 interval 10
> Sat Apr 17 21:00:51 2004: DHCPOFFER from 10.0.0.138
> Sat Apr 17 21:00:53 2004: DHCPREQUEST on eth0 to 255.255.255.255 port 67
> Sat Apr 17 21:00:54 2004: DHCPACK from 10.0.0.138
> Sat Apr 17 21:00:54 2004: bound to 10.0.0.151 -- renewal in 3600 seconds.
> Sat Apr 17 21:00:54 2004: done.

These log entries are not written by pump, it looks rather like the
dhcpcd (a different dhcp client). Which Knoppix version do you have?

> Can you tell how I could try to get dhcp to work? I found there is a 
> /sbin/dhcpd3 but I didn't see how to make it work as the configuration 
> file was read-only (even for root) and the program didn't do configuring 
> by itself

dhcpd is the dhcp server, not the client. Knoppix should start pump
(the dhcp client) at boot time automatically. Again, are you using an
official Knoppix version?

bye,
  Chris
-- 
Christian Perle                                    chris AT linuxinfotag.de
Grunaer Str. 31                                    http://silmor.de/~chris/
01069 Dresden                   LinuxGuitarKitesBicyclesBeerPizzaRaytracing
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.