Re: 3Com 3c556B not working in Knoppix 3.4

Thanks Klaus,

knoppix acpi=off 

did the trick.

Regards
Dallas





Klaus Knopper <[email protected]> 
Sent by: [email protected]
14/05/2004 08:48 PM

To
dallas-nCRzM/a5Vg/[email protected]
cc
[email protected]
Subject
Re: [debian-knoppix] 3Com 3c556B not working in Knoppix 3.4






On Fri, May 14, 2004 at 08:37:55PM +1000, dallas-nCRzM/a5Vg/[email protected] wrote:
> Hi,
> 
> I posted this information on the forum without any response. 
> The network card in my IBM Thinkpad A21m is a 3Com 556B mini PCI combo 
> card (ethernet & modem). I have no interest in the modem side... (dumb 
> winmodem) but the ethernet adapter worked OK in Knoppix 3.2 & 3.3. I 
> checked the 3c59x.o driver's file size and it is the same in 3.3 and 3.4 

> so I'm guessing that it hasn't changed. Something has however as it is 
> detected differently. Here is the output of lspci -v from the laptop 
under 
> 3.3 and 3.4.
> Does anyone have any idea what changed to cause this to fail?
> 
> Knoppix 3.3 initialises the card correctly (3Com Corporation 3c556B 
> Hurricane CardBus) and I get an IP address from the dhcp server. However 

> the card is not detected correctly in Knoppix 3.4 (3Com Corporation 
3c556B 
> CardBus [Tornado]). This results in a MAC address of FF:FF:FF:FF:FF:FF. 
> 
> Thanks in advance.
> Dallas

Try booting with

knoppix acpi=off

and/or noapic

Maybe your board has (as many do) a faulty ACPI implementation that
requires ACPI support to be turned off in the Kernel.

Regards
-Klaus Knopper
_______________________________________________
debian-knoppix mailing list
[email protected]
http://mailman.linuxtag.org/mailman/listinfo/debian-knoppix