Knoppix 3.4 & RAID

hello all,

Be have a problem with knoppix 3.4, when it boot do:

Scanning for USB/Firewire devices.... Done
Enabling DMA acceleration for: hdc [SAMSUNG CDRW/DVD
SM-352B]
Looking for CDROM in: /dev/scd0

and then it do nothing.

The knoppix 3.3 run correctly except that knoppix
don't detect the HD. I have a integrated RAID but it's
disabled in the BIOS... I want to install knoppix in
the HDA but it don't detect, due to it I want try the
kernel 2.6 to by chance detect the HD, but I can't due
to top-error.

Paste the importants part of 'lspci' that I can run in
the knoppix 3.3:

00:00.0 Host Bridge: Intel. Corp. 82865G/PE/P
Processor to I/O Controller.

00:01.0 PCI Bridge: Intel. Corp. 82865G/PE/P Processor
to AGP controller.

00:01d.0 [4] USB Controller.

00:01e.0 PCI Bridge: Intel. Corp. 82801 BA/CA/DB/CB
PCIBridge.

00:01f.0 ISA Bridge: Intel. Corp. 82801EB LPC
Interface Controller.

00:01f.1 IDE Interface: Intel. Corp.  82801EB Ultra
ATA Storage Controller.

00:01f.3 SM bus: Intel. Corp. 82801EB SMBus
Controller.

00:0f.5 Multimedia Audio Controller: Intel. Corp.
82801EB AC'97 Audio Controller.

01:00.0 VGA Compatible controller: nVidia Corp. NV34
[Geforce FX 5200]

02:03.0 Firewire [IEEE 1394]: Via Technologies, Inc.
[IEEE 1394] Host Controller.

02:04.0 RAID Bus Controller: Via Technologies, Inc
Unknow Device 3164.

02:05.0 Ethernet Controler: 3Com Corporation 3c940.



What can I do?
Thanks for your time.



		
______________________________________________________________________
Correo Yahoo! - 6MB, más protección contra el spam ¡Gratis!
http://correo.yahoo.es