Re: Invalid GART PTE entry errors during bulk data transfers
Jaap Hoetmer <[email protected]>
| Newsgroups | gmane.linux.debian.ports.amd64 |
|---|---|
| Message-ID | <[email protected]> |
OK Marco, I shall have a look when I reboot the machine. Thanks for your help Ciao, Jaap Le 24.07.2011 21:33, Marco Maske a écrit : > Jaap Hoetmer wrote: > >> Recently I installed Debian Linux 6 (Squeeze, kernel 2.6.32-5-amd64 #1 >> SMP) on an IBM eServer platform. The system has dual AMD Opteron >> processors. >> >> >> http://support.amd.com/us/Processor_TechDocs/26094.PDF >> >> On Page 333 I read: >> >> ------------------------------ >> >> 12.10.1 GART Table Walk Error Reporting >> > --- 8< >> MC4_CTL[10] bit is set. AMD also recommends adding a setup option to the >> BIOS setup menu. The >> following should be displayed in the setup option: >> >> Gart Table Walk Error MC reporting: Disabled/Enabled. >> >> The default setting is disabled. The device driver developer may enable >> this function for >> implementation and testing purposes. Also, a help message should be >> added with this setup option. >> An example of the help message is: >> >> This option should remain disabled for normal operation. >> >> ----------------------------------- >> > On Tyan (Opteron) Boards there is an Bios Option > for Disable/Enable > Debugging for Kernel/Driver developing. > And something like "Gart Table ECC reporting/logging". > > Maybe eServer has something like that and can help. > > > Ciao Marco! -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]