Re: scp stalled
Francesco Pietra <[email protected]>
| Newsgroups | gmane.linux.debian.ports.amd64 |
|---|---|
| Message-ID | <CAEv0nmvTFnUFALOvtfrXCeB8UJjDdXT3GzZjAGnCBwNiR6G3Yg@mail.gmail.com> |
Hi Robert: francesco@tya64:~$ ping -M do -s 1472 login.plx.cineca.it PING login.plx.cineca.it (130.186.16.115) 1472(1500) bytes of data. >From login.plx.cineca.it (130.186.16.115) icmp_seq=1 Destination Host Prohibited >From login.plx.cineca.it (130.186.16.115) icmp_seq=2 Destination Host Prohibited >From login.plx.cineca.it (130.186.16.115) icmp_seq=3 Destination Host Prohibited >From login.plx.cineca.it (130.186.16.115) icmp_seq=4 Destination Host Prohibited >From login.plx.cineca.it (130.186.16.115) icmp_seq=5 Destination Host Prohibited >From login.plx.cineca.it (130.186.16.115) icmp_seq=6 Destination Host Prohibited ^C --- login.plx.cineca.it ping statistics --- 6 packets transmitted, 0 received, +6 errors, 100% packet loss, time 5007ms (it continues that way indefinitely) francesco@tya64:~$ Although I can login as [email protected], francesco@tya64:~$ ping -M do -s 1472 [email protected] ping: unknown host [email protected] thanks francesco On Thu, May 22, 2014 at 9:05 AM, Robert Rottscholl <[email protected]> wrote: > Hi Francesco, > > as you have not heared of it, it is unlikely that you use it. So I would > go for an mtu check. What is 'ping -M do -s 1472 login.plx.cineca.it' > saying, does it work? > > Greets > > Robert > > Am 22.05.2014 08:53, schrieb Francesco Pietra: > >> Hi Robert: >> >> francesco@tya64:~$ uname -r >> 3.2.0-4-amd64 >> francesco@tya64:~$ >> >> >> I do not understand "tunnel". I use classical scp, passwordless (my pub >> keys at the mainframe): >> >> francesco@tya64:~$ scp -p >> [email protected]:/gpfs/scratch/userexternal/ >> fpietra0/P2f_accelMD_H2O_PLX/*30.dcd >> /home/francesco/PLX >> >> >> and "stalling" occurs randomly. I did not try with another box, where >> jelly is installed. Also, I did not try either from the Linux prompt >> (actually I us startx, followed by gnome-session. I am having those >> problems from the gnome terminal). I never had such problems from a >> French server at the Univ Picardie, but that automatically probalby uses >> ftp (and it has to be used from the graphical interface). >> >> Thanks >> francesco >> >> >> >> On Thu, May 22, 2014 at 8:00 AM, Robert Rottscholl <[email protected] >> <mailto:[email protected]>> wrote: >> >> Hi Francesco, >> >> what kernel version do you use? There is an unfixed (in mainline) >> kernel bug in the tun device which might cause your problems (see >> https://bugzilla.kernel.org/__show_bug.cgi?id=74051 >> >> <https://bugzilla.kernel.org/show_bug.cgi?id=74051> ). This will >> only be a problem if you use a tunnel to connect to your server. >> >> Greets >> >> Robert >> >> Am 21.05.2014 21 <tel:21.05.2014%2021>:16, schrieb Francesco Pietra: >> >> >> Hello: >> Since a few days, scp downloading 500MB file from a >> supercomputer at the >> Italian center CINECA results quite often in >> >> >> francesco@tya64:~/PLX$ scp -p >> [email protected]:/__gpfs/scratch/userexternal/__ >> fpietra0/P3f_accelMD_H2O_PLX/*__29.dcd >> >> /home/francesco/PLX >> npt_accel-29.dcd 3% 13MB >> 0.0KB/s - >> stalled - >> >> >> No problem with small files. >> >> Check at CINECA resulted in no malfunction. The provider >> (TELECOM ITALY) >> says their adsl if percetly functioning. Actually, the speed, ca >> 600kb/s, is as expected (don't smile, Italy is at that speed; if >> you pay >> more, you can just hope to download at 1000kb/s, while out is >> always >> impracticably slow). >> >> My question is: can scp, as available from my installation on a >> wheezy >> amd64 box, be responsible? >> >> thanks for advice >> >> francesco pietra >> >> >> >> -- >> To UNSUBSCRIBE, email to debian-amd64-REQUEST@lists.__debian.org >> <mailto:[email protected]> >> >> with a subject of "unsubscribe". Trouble? Contact >> [email protected] <mailto:[email protected]> >> Archive: https://lists.debian.org/[email protected] >> <https://lists.debian.org/[email protected]> >> >> >> > > -- > To UNSUBSCRIBE, email to [email protected] > with a subject of "unsubscribe". Trouble? Contact > [email protected] > Archive: https://lists.debian.org/[email protected] > >