Bug#1123619: /usr/share/bug/linux-image-6.17.11+deb14-amd64/presubj: Regression: IMC Networks USB2.0 UVC 2M WebCam found but unusable (was ok in image 6.17.9)

Package: src:linux
Version: 6.17.11-1
Severity: normal
File: /usr/share/bug/linux-image-6.17.11+deb14-amd64/presubj
X-Debbugs-Cc: [email protected], [email protected]
User: [email protected]
Usertags: amd64

Dear Maintainer,

I am experiencing a regression in linux image 6.17.11 (works with image 6.17.9)

   * What led up to the situation?

Trying to use the webcam with e.g. firefox (or qv4l2 for testing purpose)

   * What exactly did you do (or not do) that was effective (or
     ineffective)?

Went to a video chat site (medical in my case).

   * What was the outcome of this action?

firefox did not ask permissions for integrated webcam video capture, and no
capture was possible.

   * What outcome did you expect instead?

firefox to display a popup for accepting webcam capture, and use the webcam.


When using qv4l2, the capture is a black screen.

various CLI checks:

$ lsusb | grep -i uvc
Bus 002 Device 003: ID 13d3:5205 IMC Networks USB2.0 UVC 2M WebCam

$ sudo dmesg | grep uvcvideo
[    7.733171] usbcore: registered new interface driver uvcvideo
[ 1027.557731] uvcvideo 2-1.2:1.1: Failed to resubmit video URB (-1).
[ 1027.557798] uvcvideo 2-1.2:1.1: Failed to resubmit video URB (-1).

$ v4l2-compliance | grep -5 "fail:"

Control ioctls (Input 0):
        test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
        test VIDIOC_QUERYCTRL: OK
        test VIDIOC_G/S_CTRL: OK
                fail: v4l2-test-controls.cpp(980): ret != EINVAL (got 13)
        test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
        test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
        test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
        Standard Controls: 12 Private Controls: 0

If you need the same CLI output on the working linux image 6.17.9 for
comparison, or other CLI outputs, just ask me.

Thanks,
 Benoît


-- Package-specific info:
** Version:
Linux version 6.17.11+deb14-amd64 ([email protected]) (x86_64-linux-gnu-gcc-15 (Debian 15.2.0-10) 15.2.0, GNU ld (GNU Binutils for Debian) 2.45.50.20251201) #1 SMP PREEMPT_DYNAMIC Debian 6.17.11-1 (2025-12-07)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.17.11+deb14-amd64 root=UUID=1a8d2ce0-e569-47d1-8ee3-390704d653a0 ro quiet

** Not tainted

** Kernel log:
[    4.669703] hdaudio hdaudioC0D5: no AFG or MFG node found
[    4.669753] hdaudio hdaudioC0D6: no AFG or MFG node found
[    4.669804] hdaudio hdaudioC0D7: no AFG or MFG node found
[    4.669851] snd_hda_intel 0000:01:00.1: no codecs initialized
[    4.669910] snd_hda_intel 0000:01:00.1: GPU sound probed, but not operational: please add a quirk to driver_denylist
[    4.812141] videodev: Linux video capture interface: v2.00
[    4.832745] Adding 999420k swap on /dev/sdb5.  Priority:-2 extents:1 across:999420k SS
[    4.875311] EXT4-fs (sda1): mounted filesystem 21e1cf34-53af-4d1b-957e-0668a30206d7 r/w with ordered data mode. Quota mode: none.
[    5.138714] MXM: GUID detected in BIOS
[    5.138955] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, 
[    5.138961] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGR.GFX0 handle
[    5.138993] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[    5.139062] nouveau 0000:01:00.0: NVIDIA GF108 (0c1a00a1)
[    5.153165] nouveau 0000:01:00.0: bios: version 70.08.45.00.2f
[    5.269116] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[    5.328059] nouveau 0000:01:00.0: drm: VRAM: 2048 MiB
[    5.328063] nouveau 0000:01:00.0: drm: GART: 1048576 MiB
[    5.328066] nouveau 0000:01:00.0: drm: TMDS table version 2.0
[    5.328789] nouveau 0000:01:00.0: drm: failed to create ce channel, -22
[    5.352232] nouveau 0000:01:00.0: drm: MM: using M2MF for buffer copies
[    5.353594] [drm] Initialized nouveau 1.4.0 for 0000:01:00.0 on minor 0
[    5.364171] nouveau 0000:01:00.0: drm: [DRM/00000000:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7)
[    5.386051] Console: switching to colour frame buffer device 128x48
[    5.386946] nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[    5.407071] audit: type=1400 audit(1766088479.192:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=676 comm="apparmor_parser"
[    5.407080] audit: type=1400 audit(1766088479.192:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=672 comm="apparmor_parser"
[    5.407084] audit: type=1400 audit(1766088479.192:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=674 comm="apparmor_parser"
[    5.407087] audit: type=1400 audit(1766088479.192:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=681 comm="apparmor_parser"
[    5.407090] audit: type=1400 audit(1766088479.192:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=678 comm="apparmor_parser"
[    5.407092] audit: type=1400 audit(1766088479.192:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=679 comm="apparmor_parser"
[    5.407095] audit: type=1400 audit(1766088479.192:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=671 comm="apparmor_parser"
[    5.410013] audit: type=1400 audit(1766088479.196:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=695 comm="apparmor_parser"
[    5.410570] audit: type=1400 audit(1766088479.196:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=699 comm="apparmor_parser"
[    5.410648] audit: type=1400 audit(1766088479.196:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chrome" pid=700 comm="apparmor_parser"
[    5.451733] nouveau 0000:01:00.0: drm: [DRM/00000000:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7)
[    5.682900] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    5.682907] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    5.682909] RAPL PMU: hw unit of domain package 2^-16 Joules
[    5.682911] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    5.686666] i915 0000:00:02.0: [drm] Found sandybridge (device ID 0116) integrated display version 6.00 stepping N/A
[    5.711582] i915 0000:00:02.0: vgaarb: deactivate vga console
[    5.732759] RPC: Registered named UNIX socket transport module.
[    5.732765] RPC: Registered udp transport module.
[    5.732767] RPC: Registered tcp transport module.
[    5.732769] RPC: Registered tcp-with-tls transport module.
[    5.732770] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.756785] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
[    5.756795] nouveau 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[    5.778380] i915 0000:00:02.0: [drm] Skipping intel_backlight registration
[    5.782337] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 1
[    5.782542] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    5.782941] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4a/LNXVIDEO:00/input/input19
[    5.783722] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.784756] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input20
[    5.808055] acpi device:4e: registered as cooling_device8
[    5.809188] acpi device:50: registered as cooling_device9
[    5.840174] usb 2-1.2: Found UVC 1.00 device USB2.0 UVC 2M WebCam (13d3:5205)
[    5.862725] ath: phy0: Enable LNA combining
[    5.865180] ath: EEPROM regdomain: 0x60
[    5.865187] ath: EEPROM indicates we should expect a direct regpair map
[    5.865190] ath: Country alpha2 being used: 00
[    5.865192] ath: Regpair used: 0x60
[    5.867264] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.880239] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0x000000002b0057ba, irq=17
[    5.891775] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
[    5.966546] fbcon: i915drmfb (fb1) is primary device
[    5.966552] fbcon: Remapping primary device, fb1, to tty 1-63
[    6.094349] intel_rapl_common: Found RAPL domain package
[    6.094353] intel_rapl_common: Found RAPL domain core
[    6.094354] intel_rapl_common: Found RAPL domain uncore
[    6.199380] usbcore: registered new interface driver snd-usb-audio
[    6.932498] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])
[    7.026553] snd_hda_codec_alc269 hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
[    7.026570] snd_hda_codec_alc269 hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    7.026577] snd_hda_codec_alc269 hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    7.026584] snd_hda_codec_alc269 hdaudioC1D0:    mono: mono_out=0x0
[    7.026588] snd_hda_codec_alc269 hdaudioC1D0:    dig-out=0x1e/0x0
[    7.026591] snd_hda_codec_alc269 hdaudioC1D0:    inputs:
[    7.026596] snd_hda_codec_alc269 hdaudioC1D0:      Mic=0x18
[    7.026601] snd_hda_codec_alc269 hdaudioC1D0:      Internal Mic=0x19
[    7.086409] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[    7.086648] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[    7.086824] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[    7.733171] usbcore: registered new interface driver uvcvideo
[    7.981756] i915 0000:00:02.0: [drm] fb1: i915drmfb frame buffer device
[    7.982008] vga_switcheroo: enabled
[    8.126981] NET: Registered PF_QIPCRTR protocol family
[    8.232698] atl1c 0000:05:00.0: atl1c: enp5s0 NIC Link is Up<1000 Mbps Full Duplex>
[    8.899802] snd_hda_intel 0000:01:00.1: Unable to change power state from D3cold to D0, device inaccessible
[    9.375928] evm: overlay not supported
[    9.775512] Initializing XFRM netlink socket
[    9.835438] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   10.568117] nouveau 0000:01:00.0: drm: [DRM/00000000:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7)
[   12.529063] rfkill: input handler disabled
[   13.284638] nouveau 0000:01:00.0: drm: [DRM/00000000:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7)
[   26.970812] rfkill: input handler enabled
[   27.917160] nouveau 0000:01:00.0: drm: [DRM/00000000:kmsOutp] [LOAD_DETECT data:00000154] load:07 (ret:7)
[   30.005850] rfkill: input handler disabled
[   31.757790] input: solaar-keyboard as /devices/virtual/input/input24
[   32.504822] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

** Model information
sys_vendor: ASUSTeK Computer Inc.
product_name: N73SV
product_version: 1.0
chassis_vendor: ASUSTeK Computer Inc.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: N73SV.306
board_vendor: ASUSTeK Computer Inc.
board_name: N73SV
board_version: 1.0

** Configuration for modprobe:
blacklist microcode
blacklist arkfb
blacklist aty128fb
blacklist atyfb
blacklist radeonfb
blacklist cirrusfb
blacklist cyber2000fb
blacklist kyrofb
blacklist matroxfb_base
blacklist mb862xxfb
blacklist neofb
blacklist pm2fb
blacklist pm3fb
blacklist s3fb
blacklist savagefb
blacklist sisfb
blacklist tdfxfb
blacklist tridentfb
blacklist vt8623fb
blacklist microcode
options snd_pcsp index=-2
options cx88_alsa index=-2
options snd_atiixp_modem index=-2
options snd_intel8x0m index=-2
options snd_via82xx_modem index=-2
options snd_hda_intel position_fix=0
options bonding max_bonds=0
options dummy numdummies=0
options ifb numifbs=0

** Loaded modules:
uinput
snd_seq_dummy
snd_hrtimer
xt_conntrack
nft_chain_nat
xt_MASQUERADE
nf_nat
nf_conntrack
nf_defrag_ipv6
nf_defrag_ipv4
bridge
stp
llc
xfrm_user
xfrm_algo
snd_seq
xt_addrtype
nft_compat
x_tables
nf_tables
overlay
qrtr
snd_hda_codec_intelhdmi
snd_hda_codec_hdmi
snd_hda_codec_alc269
snd_hda_scodec_component
snd_hda_codec_realtek_lib
snd_hda_codec_generic
intel_rapl_msr
intel_rapl_common
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
ath9k
uvcvideo
irqbypass
ath9k_common
ghash_clmulni_intel
videobuf2_vmalloc
mei_pxp
aesni_intel
ath9k_hw
snd_usb_audio
uvc
rapl
videobuf2_memops
sunrpc
binfmt_misc
mei_hdcp
videobuf2_v4l2
snd_usbmidi_lib
ath
intel_cstate
i915
nouveau
videodev
snd_rawmidi
mac80211
videobuf2_common
snd_seq_device
intel_uncore
mc
asus_nb_wmi
asus_wmi
libarc4
vga16fb
sparse_keymap
snd_hda_intel
drm_gpuvm
mxm_wmi
platform_profile
vgastate
at24
pcspkr
cfg80211
gpu_sched
snd_hda_codec
snd_hda_core
drm_ttm_helper
drm_buddy
ttm
drm_exec
snd_intel_dspcfg
snd_intel_sdw_acpi
drm_display_helper
rfkill
snd_hwdep
cec
rc_core
snd_pcm
drm_client_lib
snd_timer
snd
mei_me
drm_kms_helper
ac
mei
soundcore
i2c_algo_bit
button
evdev
sg
joydev
dm_mod
drm
parport_pc
ppdev
lp
parport
msr
i2c_dev
configfs
efi_pstore
nfnetlink
autofs4
ext4
crc16
mbcache
jbd2
crc32c_cryptoapi
hid_generic
usbhid
hid
sr_mod
sd_mod
cdrom
ahci
iTCO_wdt
intel_pmc_bxt
libahci
iTCO_vendor_support
xhci_pci
libata
xhci_hcd
watchdog
ehci_pci
ehci_hcd
scsi_mod
usbcore
psmouse
lpc_ich
atl1c
video
i2c_i801
serio_raw
scsi_common
wmi
i2c_smbus
battery
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode])
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 24
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: d000-dfff [size=4K] [16-bit]
	Memory behind bridge: db000000-dc0fffff [size=17M] [32-bit]
	Prefetchable memory behind bridge: c0000000-d1ffffff [size=288M] [32-bit]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
	DeviceName:  Onboard IGD
	Subsystem: ASUSTeK Computer Inc. Device [1043:15e2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at dc400000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at e000 [size=64]
	Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at df00a000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at df008000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) (prog-if 00 [HDA compatible])
	DeviceName:  Onboard Audio
	Subsystem: ASUSTeK Computer Inc. Device [1043:1a33]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at df000000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: c000-cfff [size=4K] [16-bit]
	Memory behind bridge: de600000-deffffff [size=10M] [32-bit]
	Prefetchable memory behind bridge: d4200000-d4bfffff [size=10M] [32-bit]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode])
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: b000-bfff [size=4K] [16-bit]
	Memory behind bridge: ddc00000-de5fffff [size=10M] [32-bit]
	Prefetchable memory behind bridge: d3700000-d40fffff [size=10M] [32-bit]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode])
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 19
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: a000-afff [size=4K] [16-bit]
	Memory behind bridge: dd200000-ddbfffff [size=10M] [32-bit]
	Prefetchable memory behind bridge: d2c00000-d35fffff [size=10M] [32-bit]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 9000-9fff [size=4K] [16-bit]
	Memory behind bridge: dc800000-dd1fffff [size=10M] [32-bit]
	Prefetchable memory behind bridge: d2100000-d2afffff [size=10M] [32-bit]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at df007000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset LPC Controller [8086:1c49] (rev 05)
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 25
	Region 0: I/O ports at e0b0 [size=8]
	Region 1: I/O ports at e0a0 [size=4]
	Region 2: I/O ports at e090 [size=8]
	Region 3: I/O ports at e080 [size=4]
	Region 4: I/O ports at e060 [size=32]
	Region 5: Memory at df006000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
	Subsystem: ASUSTeK Computer Inc. Device [1043:11d7]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at df005000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at e040 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 540M] [10de:0df4] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:15e2]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at db000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at d000 [size=128]
	Expansion ROM at dc000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau
	Kernel modules: nouveau

01:00.1 Audio device [0403]: NVIDIA Corporation GF108 High Definition Audio Controller [10de:0bea] (rev a1) (prog-if 00 [HDA compatible])
	!!! Unknown header type 7f
	Interrupt: pin ? routed to IRQ 17
	Region 0: Memory at dc080000 (32-bit, non-prefetchable) [size=16K]
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

03:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
	Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card [1a3b:1089]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at ddc00000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath9k
	Kernel modules: ath9k

04:00.0 USB controller [0c03]: Fresco Logic FL1000G USB 3.0 Host Controller [1b73:1000] (rev 04) (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:1039]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at dd200000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

05:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0)
	Subsystem: ASUSTeK Computer Inc. Device [1043:1851]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 30
	Region 0: Memory at dc800000 (64-bit, non-prefetchable) [size=256K]
	Region 2: I/O ports at 9000 [size=128]
	Capabilities: <access denied>
	Kernel driver in use: atl1c
	Kernel modules: atl1c


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 046d:c548 Logitech, Inc. Logi Bolt Receiver
Bus 001 Device 004: ID 2109:2815 VIA Labs, Inc. USB2.0 Hub             
Bus 001 Device 005: ID 1235:8016 Focusrite-Novation Focusrite Scarlett 2i2
Bus 001 Device 006: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 003: ID 13d3:5205 IMC Networks USB2.0 UVC 2M WebCam
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub


-- System Information:
Debian Release: forky/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 6.17.11+deb14-amd64 (SMP w/8 CPU threads; PREEMPT)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled

Versions of packages linux-image-6.17.11+deb14-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.150
ii  kmod                                    34.2-2
ii  linux-base                              4.14

Versions of packages linux-image-6.17.11+deb14-amd64 recommends:
ii  apparmor  4.1.0-1+b1

Versions of packages linux-image-6.17.11+deb14-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  firmware-linux-free     20241210-2
ii  grub-pc                 2.14~git20250718.0e36779-2
pn  linux-doc-6.17          <none>

Versions of packages linux-image-6.17.11+deb14-amd64 is related to:
ii  firmware-amd-graphics      20251111-1
pn  firmware-atheros           <none>
pn  firmware-bnx2              <none>
pn  firmware-bnx2x             <none>
pn  firmware-brcm80211         <none>
pn  firmware-cavium            <none>
pn  firmware-cirrus            <none>
ii  firmware-intel-graphics    20251111-1
ii  firmware-intel-misc        20251111-1
pn  firmware-intel-sound       <none>
pn  firmware-ipw2x00           <none>
pn  firmware-ivtv              <none>
pn  firmware-iwlwifi           <none>
pn  firmware-libertas          <none>
pn  firmware-marvell-prestera  <none>
ii  firmware-mediatek          20251111-1
ii  firmware-misc-nonfree      20251111-1
pn  firmware-myricom           <none>
pn  firmware-netronome         <none>
pn  firmware-netxen            <none>
ii  firmware-nvidia-graphics   20251111-1
pn  firmware-qcom-soc          <none>
pn  firmware-qlogic            <none>
pn  firmware-realtek           <none>
pn  firmware-samsung           <none>
pn  firmware-siano             <none>
pn  firmware-ti-connectivity   <none>
pn  xen-hypervisor             <none>

-- no debconf information