Bug#1137565: openorienteering-mapper: FTBFS on armhf: test failures

Source: openorienteering-mapper
Version: 0.9.6-2
Severity: serious
Tags: ftbfs
Justification: fails to build from source (but built successfully in the past)
X-Debbugs-Cc: [email protected], [email protected]
User: [email protected]
Usertags: armhf

Dear maintainer,

openorienteering-mapper FTBFS on armhf:

28: Test command: /usr/bin/cmake "-P" "transform_t-RUN.cmake"
28: Working Directory: /build/reproducible-path/openorienteering-mapper-0.9.6/obj-arm-linux-gnueabihf/test
28: Test timeout computed to be: 1500
28: ********* Start testing of TransformTest *********
28: Config: Using QtTest library 5.15.17, Qt 5.15.17 (arm-little_endian-ilp32-eabi-hardfloat shared (dynamic) release build; by GCC 15.2.0), debian unknown
28: PASS   : TransformTest::initTestCase()
28: PASS   : TransformTest::testTransformBasics()
28: PASS   : TransformTest::testTransformIdentity()
28: PASS   : TransformTest::testTransformTranslate()
28: PASS   : TransformTest::testTransformProject()
28: PASS   : TransformTest::testTransformRotate(No rotation)
28: PASS   : TransformTest::testTransformRotate(90 deg)
28: PASS   : TransformTest::testTransformRotate(180 deg)
28: PASS   : TransformTest::testTransformRotate(200 deg)
28: PASS   : TransformTest::testTransformRotate(270 deg)
28: PASS   : TransformTest::testTransformCombined(No rotation)
28: PASS   : TransformTest::testTransformCombined(90 deg)
28: PASS   : TransformTest::testTransformCombined(180 deg)
28: PASS   : TransformTest::testTransformCombined(200 deg)
28: PASS   : TransformTest::testTransformCombined(270 deg)
28: PASS   : TransformTest::testTransformRoundTrip(No rotation)
28: PASS   : TransformTest::testTransformRoundTrip(90 deg)
28: PASS   : TransformTest::testTransformRoundTrip(180 deg)
28: PASS   : TransformTest::testTransformRoundTrip(-160 deg)
28: PASS   : TransformTest::testTransformRoundTrip(-90 deg)
28: FAIL!  : TransformTest::testEstimateNonIsometric() Compared values are not the same
28:    Actual   (qt.map(passpoints[0].src_coords))  : QPointF(64,0)
28:    Expected (QPointF{passpoints[0].dest_coords}): QPointF(64,64)
28:    Loc: [/build/reproducible-path/openorienteering-mapper-0.9.6/test/transform_t.cpp(286)]
28: PASS   : TransformTest::testEstimateSimilarityTransformation()
28: PASS   : TransformTest::cleanupTestCase()
28: Totals: 22 passed, 1 failed, 0 skipped, 0 blacklisted, 1ms
28: ********* Finished testing of TransformTest *********
28: CMake Error at transform_t-RUN.cmake:35 (message):
28:   Test transform_t failed: 1
28: 
28: 
28/30 Test #28: transform_t ........................***Failed    0.17 se

...


The following tests FAILED:
	 25 - template_t (Failed)
	 28 - transform_t (Failed)
Errors while running CTest
Output from these tests are in: /build/reproducible-path/openorienteering-mapper-0.9.6/obj-arm-linux-gnueabihf/Testing/Temporary/LastTest.log
Use "--rerun-failed --output-on-failure" to re-run the failed cases verbosely.
make[1]: *** [debian/rules:56: override_dh_auto_test] Error 8
make[1]: Leaving directory '/build/reproducible-path/openorienteering-mapper-0.9.6'
make: *** [debian/rules:28: binary-arch] Error 2


See
https://buildd.debian.org/status/fetch.php?pkg=openorienteering-mapper&arch=armhf&ver=0.9.6-2&stamp=1779444704&raw=0
for details.

Cheers