Re: Debian Sid HP PA-RISC init (pid 1): Unaligned data reference (code 28) at f8affb6f

Michael Biebl <[email protected]> Mon, 20 Jul 2020 22:20:02 +0200
Newsgroups	gmane.linux.debian.ports.hppa
Message-ID	<8ef1b615-0aee-72e9-1bf0-c3a8e3db3cef__48387.7794629493$1595277194$gmane$org@debian.org>
Control: tags -1 + help
Control: user -1 [email protected]
Control: usertags -1 + hppa

Hi Anton,

hppa is no longer a supported architecture.
If you want to see this fixed, you'll need to provide a patch and get
that accepted upstream or have to work with someone who can help with that.
For that, I've CCed the hppa mailing list and usertagged the bug report
accordingly.
Last time we had an hppa issue, John David Anglin was very helpful.
Maybe he can chime in here as well

Regards,
Michael


On Sat, 11 Jul 2020 01:01:48 +0800
=?UTF-8?B?0JDQvdGC0L7QvSDQmtC+0YfQutC+0LI=?= <[email protected]>
wrote:
> Package: systemd-sysv
> Version: 245.6-1
> 
> I attached installation and running scripts at the bottom. I ran
> Debian 10.0.0 installation cdrom with Qemu 4.2.0, installation went
> fine but the bus error appears all the time while running.
> 
> Let me know if you need this VM qcow2 image. CDROM image downloaded from
> https://cdimage.debian.org/cdimage/ports/current/debian-10.0.0-hppa-NETINST-1.iso
> 
> QEMU emulator version 4.2.0 (qemu-4.2.0-7.fc32)
> 
> Formatting 'debian-10.0.0-hppa-hdd.qcow2', fmt=qcow2 size=4294967296
> cluster_size=65536 lazy_refcounts=off refcount_bits=16
> WARNING: Image format was not specified for 'json:{"fat-type": 0,
> "backing": {"driver": "vvfat_write_target"}, "dir": "share/",
> "driver": "vvfat", "floppy": false, "rw": true, "write-target":
> {"driver": "qcow", "file": {"driver": "file", "filename":
> "/var/tmp/vl.2AiM5z"}}}' and probing guessed raw.
>          Automatically detecting the format is dangerous for raw
> images, write operations on block 0 will be restricted.
>          Specify the 'raw' format explicitly to remove the restrictions.
> qemu-system-hppa: warning: Guest expects a stronger memory ordering
> than the host provides
> This may cause strange/hard to debug errors
> 
> Firmware Version 6.1
> 
> Duplex Console IO Dependent Code (IODC) revision 1
> 
> Memory Test/Initialization Completed
> 
> ------------------------------------------------------------------------------
>   (c) Copyright 2017-2018 Helge Deller <[email protected]> and SeaBIOS developers.
> ------------------------------------------------------------------------------
> 
>   Processor   Speed            State           Coprocessor State  Cache Size
>   ---------  --------   ---------------------  -----------------  ----------
>       0      250 MHz    Active                 Functional            0 KB
>       1      250 MHz    Idle                   Functional            0 KB
>       2      250 MHz    Idle                   Functional            0 KB
>       3      250 MHz    Idle                   Functional            0 KB
> 
> 
>   Available memory:     512 MB
>   Good memory required: 16 MB
> 
>   Primary boot path:    FWSCSI.0.0
>   Alternate boot path:  FWSCSI.1.0
>   Console path:         SERIAL_1.9600.8.none
>   Keyboard path:        PS2
> 
> Available boot devices:
> 1. DVD/CD [lsi 00:00.0 1:0 Drive QEMU QEMU CD-ROM 2.5+]
> 2. lsi 00:00.0 0:0 Drive QEMU QEMU HARDDISK 2.5+
> 3. lsi 00:00.0 2:0 Drive QEMU QEMU HARDDISK 2.5+
> 
> Booting from DVD/CD [lsi 00:00.0 1:0 Drive QEMU QEMU CD-ROM 2.5+]
> 
> Booting...
signature.asc (application/pgp-signature, 833 B)