Re: rx2660 + debian

my info so far:

[root@rx2660 ~]# cat /proc/cpuinfo |less

vendor     : GenuineIntel
arch       : IA-64
family     : Itanium 2
model      : 0
revision   : 7
archrev    : 0
features   : branchlong, 16-byte atomic ops
cpu number : 0
cpu regs   : 4
cpu MHz    : 1594.000670
itc MHz    : 399.165948
BogoMIPS   : 3186.68
siblings   : 4
physical id: 0
core id    : 0
thread id  : 0

[root@rx2660 ~]# lspci
00:01.0 Class ff00: Hewlett-Packard Company RMP-3 (Remote Management
Processor)
00:01.1 Communication controller: Hewlett-Packard Company RMP-3 Shared
Memory Driver
00:01.2 Serial controller: Hewlett-Packard Company Diva Serial [GSP]
Multiport UART
00:02.0 USB Controller: NEC Corporation USB (rev 43)
00:02.1 USB Controller: NEC Corporation USB (rev 43)
00:02.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
00:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
01:01.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068 PCI-X
Fusion-MPT SAS (rev 01)
01:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit
Ethernet (rev 10)
01:02.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit
Ethernet (rev 10)
02:00.0 PCI bridge: Hewlett-Packard Company PCIe Root Port
04:00.0 PCI bridge: Hewlett-Packard Company PCIe Root Port
05:00.0 RAID bus controller: Hewlett-Packard Company Smart Array Controller
(rev 03)
07:00.0 PCI bridge: Hewlett-Packard Company PCIe Root Port
08:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI
Express HBA (rev 02)
08:00.1 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI
Express HBA (rev 02)

SYSREV

Current firmware revisions

 MP FW     : F.02.26
 BMC FW    : 05.26
 EFI FW    : ROM A 05.65, ROM B 07.14
 System FW : ROM A 01.05, ROM B 04.30, Boot ROM B
 PDH FW    : 50.07
 UCIO FW   : 03.0b
 PRS FW    : 00.08 UpSeqRev: 02, DownSeqRev: 01

P/n for this cpu: AH238-2100A (18mb L2 cache)

On Sat, 9 Apr 2022 11:48 Frank Scheiner, <[email protected]> wrote:

> Hi,
>
> On 09.04.22 10:25, John Paul Adrian Glaubitz wrote:
> > Hello!
> >
> > On 4/9/22 10:06, Frank Scheiner wrote:
> >> Could you please also mention what processors you have installed,
> >> Montecito (90xy) or Montvale (91xy[z])? I'm not sure if this makes a
> >> difference, but suspect it could.
> >
> > glaubitz@electron:~$ cat /proc/cpuinfo |head -n18
> > processor  : 0
> > vendor     : GenuineIntel
> > arch       : IA-64
> > family     : 32
> > model      : 0
> > model name : Dual-Core Intel(R) Itanium(R) Processor 9050
> > revision   : 5
> > archrev    : 0
> > features   : branchlong, 16-byte atomic ops
> > cpu number : 0
> > cpu regs   : 4
> > cpu MHz    : 1594.671
> > itc MHz    : 399.166326
> > BogoMIPS   : 3182.59
> > siblings   : 4
> > physical id: 0
> > core id    : 0
> > thread id  : 0
> > glaubitz@electron:~$
>
> Thanks! I have two of those in one of my rx2660s and the other one has a
> single 9140M IIRC. But both are in (cold) storage right now, so no way
> to get the firmware levels in the near future - unless the spring
> returns shortly. ;-)
>
> But I will check my rx2620 for the firmware information and if it runs
> with the latest kernel. Procesors are Montecitos there (9020s IIRC).
>
> Cheers,
> Frank
>