Re: kernels for Loongson 3A

Hi, Qian and Chen

Please see see, Andreas use http://dev.lemote.com/files/upload/lm/kernel
/testing/pmon-A1004-2.1.3.bin on A1004 notebook but have boot failure.

> * [email protected] ([email protected]) [130626 02:47]:
>> I see that your PMON is *not* from lemote, and I think this is the root
>> cause of boot failure. Please use this one, thanks.
>> http://dev.lemote.com/files/upload/lm/kernel/testing/pmon-A1004-2.1.3.bin
>
>
> Booting this ends up with:
>  SuperIO RTC
> Pull up GPIO15.
> NODE 0 MEMORY CONFIG BEGIN
>
> Probing DDR SLOT: 00000000
>
> Set DDR frequency by software
>
> Enable register space of MEMORY
> DDR Interleave space open : 0x00000000 - 0x0FFFFFFF
> DDR Interleave using Bit 13
> DDR Interleave space open : 0x1_1000_0000 - 0x1_FFFF_FFFF
> DDR Interleave using Bit 13
> Disable register space of MEMORY
> Disable cpu buffered read
>
> and stops there. Doesn't seem to be entirly right to me then.
>
> (whereas the output of the other one continues with
>  SuperIO RTC
>
>  spd_info_store begain.
>
>  spd_info_store done.
> Copy PMON to execute location...
>   start = 0x81000000
>   s0 = 0x3ec00000
> 81080000
> copy text section done.
> Copy PMON to execute location done.
> sp=80ffc000
> Uncompressing
> Bios....................................................................OK,Booting
> Bios
> memsz 2032
> FREQ
> RTC: 13-07-24 20:10:07
> FREI
> cpu fre 900000000
> DONE
> DEVI
> init uhci cmd called
> ENVI
> MAPV
> in envinit
> )
>
>
> Any hints for me?
>
>
>
> Regards,
> Andi
>



-- 
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
Archive: http://lists.debian.org/[email protected]