Re: debian-installer now available in Ports

Steven Chamberlain <[email protected]> Wed, 12 Apr 2017 20:34:31 +0100

Newsgroups	gmane.linux.debian.ports.mips
Message-ID	<20170412193430.GQ38395__48607.3745800697$1492025718$gmane$org@pyro.eu.org>

I've set up some additional jobs at
http://jenkins.kfreebsd.eu/jenkins/view/cd/

and after much trial-and-error, there are now (untested) sid netinst
images built for:
    hurd-i386 kfreebsd-amd64 kfreebsd-i386 powerpc

You can find the .iso images within each job's workspace e.g.:
http://jenkins.kfreebsd.eu/jenkins/view/cd/job/debian-cd_sid_hurd-i386/ws/build/

It's building on a kfreebsd-amd64 host, in a jessie-kfreebsd chroot,
with current Git master of debian-cd, my patches for #860187 and
#860204 applied, and the attached diff against CONF.sh.  I started each
build like this:

$ export CODENAME=sid
$ export ARCHES=hurd-i386
$ CONF.sh && ./build.sh

Regards,
-- 
Steven Chamberlain
[email protected]

CONF.sh.diff (text/x-diff, 4.5 KB)

diff --git a/CONF.sh b/CONF.sh
index 99e58ad..08ffbd7 100644
--- a/CONF.sh
+++ b/CONF.sh
@@ -62,11 +62,15 @@ export BASEDIR=`pwd`
 # export CDNAME=debian
 
 # Building $codename cd set ...
-export CODENAME=stretch
+#export CODENAME=stretch
 
 # By default use Debian installer packages from $CODENAME
 if [ -z "$DI_CODENAME" ]; then
-	export DI_CODENAME=$CODENAME
+	if [ "${CODENAME}" = "jessie-kfreebsd" ]; then
+		export DI_CODENAME=${CODENAME}-proposed-updates
+	else
+		export DI_CODENAME=${CODENAME}
+	fi
 fi
 # If you want backported d-i (e.g. by setting
 # DI_CODENAME=jessie-backports, then you'll almost definitely also
@@ -86,7 +90,7 @@ fi
 #export DI_WWW_HOME=default
 
 # Version number, "2.2 r0", "2.2 r1" etc.
-export DEBVERSION="9.0"
+export DEBVERSION="unofficial"
 
 # Official or non-official set.
 # NOTE: THE "OFFICIAL" DESIGNATION IS ONLY ALLOWED FOR IMAGES AVAILABLE
@@ -119,17 +123,17 @@ fi
 #	      images, however. Also, if you are using an NFS partition for
 #	      some part of this, you must use this option.
 # Paths to the mirrors
-export MIRROR=/srv/mirror/debian
+export MIRROR=/srv/ftp.debian.org
 
 # Path of the temporary directory
-export TDIR=/srv/mirror/tmp
+export TDIR=/home/cd/tmp
 
 # Path where the images will be written
-export OUT=/srv/mirror/debian-cd-test
+export OUT=/home/cd/out
 
 # Where we keep the temporary apt stuff.
 # This cannot reside on an NFS mount.
-export APTTMP=/srv/mirror/tmp/apt
+export APTTMP=$TDIR/apt
 
 # Do I want to have NONFREE merged in the CD set
 # export NONFREE=1
@@ -164,7 +168,9 @@ export CONTRIB=1
 # Note that on the CDs it will not be visible where packages came from:
 # from the released archive or from proposed updates archive.
 # NOTE: intended to be used for pre-release testing, not for publication!
-#export PROPOSED_UPDATES=$CODENAME-proposed-updates
+if [ "${CODENAME}" = "jessie-kfreebsd" ]; then
+	export PROPOSED_UPDATES=$CODENAME-proposed-updates
+fi
 
 # Sparc only : bootdir (location of cd.b and second.b)
 # export BOOTDIR=/boot
@@ -175,7 +181,7 @@ export CONTRIB=1
 # Use this to force copying the files instead of symlinking or hardlinking
 # them. This is useful if your destination directories are on a different
 # partition than your source files.
-# export COPYLINK=1
+export COPYLINK=1
 
 # Options
 # export MKISOFS=mkisofs
@@ -190,6 +196,12 @@ export CONTRIB=1
 #export i386_MKISOFS_OPTS="-as mkisofs -r -checksum_algorithm_iso md5,sha1"
 #export amd64_MKISOFS="xorriso"
 #export amd64_MKISOFS_OPTS="-as mkisofs -r -checksum_algorithm_iso md5,sha1"
+export hurd_i386_MKISOFS="xorriso"
+export hurd_i386_MKISOFS_OPTS="-as mkisofs -r -checksum_algorithm_iso sha256"
+export kfreebsd_i386_MKISOFS="xorriso"
+export kfreebsd_i386_MKISOFS_OPTS="-as mkisofs -r -checksum_algorithm_iso sha256"
+export kfreebsd_amd64_MKISOFS="xorriso"
+export kfreebsd_amd64_MKISOFS_OPTS="-as mkisofs -r -checksum_algorithm_iso sha256"
 
 # Keyring (defaults):
 #ARCHIVE_KEYRING_PACKAGE=debian-archive-keyring
@@ -233,7 +245,7 @@ ATTEMPT_FALLBACK=yes
 # STICK4GB:          4GB USB stick or similar
 # STICK8GB:          8GB USB stick or similar
 # CUSTOM:            up to you - specify a size to go with it (in 2K blocks)
-export DISKTYPE=CD
+export DISKTYPE=NETINST
 #export DISKTYPE=CUSTOM
 #export CUSTOMSIZE=XXXX
 # If you want to over-ride this choice (e.g. to make a larger version of a given disk),
@@ -242,7 +254,7 @@ export DISKTYPE=CD
 # export FORCE_CD_SIZE1=<type> to change the size of disk 1 (only)
 
 # Extra variants to enable. See docs/README.variants for more information.
-export VARIANTS=
+export VARIANTS=light
 
 # We don't want certain packages to take up space on CD1...
 #export EXCLUDE1=exclude
@@ -375,8 +387,8 @@ export SNAPURL=Debian=http://snapshot.debian.org/archive/debian/SNAPDATETIME/
 # INSTALLER_CD=0: nothing special (default)
 # INSTALLER_CD=1: just add debian-installer (use TASK=debian-installer)
 # INSTALLER_CD=2: add d-i and base (use TASK=debian-installer+kernel)
-#export INSTALLER_CD=2
-#export TASK=debian-installer+kernel
+export INSTALLER_CD=2
+export TASK=debian-installer+kernel
 
 # Parameters to pass to kernel (or d-i) when the CD boots. Not currently
 # supported for all architectures.
@@ -387,7 +399,7 @@ export SNAPURL=Debian=http://snapshot.debian.org/archive/debian/SNAPDATETIME/
 
 # If set, limits the number of images to produce. The maximum
 # value of MAXISOS and MAXJIGDOS are limited to this setting.
-#export MAXCDS=1
+export MAXCDS=1
 
 # If set, overrides the boot picture used.
 #export SPLASHPNG="$BASEDIR/data/$CODENAME/splash-img.png"

signature.asc (application/pgp-signature, 648 B)