Re: Errors were encountered while processing: linux-image-6.12.17-powerpc64

Cedar Maxwell <[email protected]>
Newsgroups gmane.linux.debian.ports.powerpc
Message-ID <[email protected]>
Thank you sir, this solved my problem.

Cedar Maxwell

On Mon, 2025-07-07 at 19:42 +0100, James Madgwick wrote:
> On Sun, 06 Jul 2025 23:05:48 +0200
> John Paul Adrian Glaubitz <[email protected]> wrote:
> 
> > On Sun, 2025-07-06 at 15:06 -0500, Cedar Maxwell wrote:
> > > Continue? [Y/n] y
> > > (Reading database ... 494570 files and directories currently
> > > installed.)
> > > Removing linux-image-6.12.17-powerpc64 (6.12.17-1) ...
> > > /etc/kernel/postrm.d/initramfs-tools:
> > > update-initramfs: Deleting /boot/initrd.img-6.12.17-powerpc64
> > > /etc/kernel/postrm.d/zz-update-grub:
> > > /usr/sbin/grub-mkconfig: 274: cannot create
> > > /boot/grub/grub.cfg.new:
> > > Read-only file system
> > 
> > Your HFS boot filesystem has errors and was mounted read-only.
> > 
> > You need to install hfsprogs, umount /boot/grub and then run
> > "fsck.hfs /dev/sda2" where (sda2) is the partition of your HFS
> > filesystem. (All from memory, please verify the actual paths are
> > correct).
> > 
> > There are some bugs in the HFS/HFS+ driver in the Linux kernel
> > which
> > may have caused this. These bugs are now being worked on by new
> > maintainers [1].
> > 
> > Adrian
> > 
> > > [1] https://github.com/hfs-linux-kernel/hfs-linux-kernel/issues
> 
> I experienced this exact problem yesterday when updating my system.
> Adrian's instructions match with the commands I ran (as root) to get
> it
> fixed:
> 
> umount /boot/grub
> apt install hfsprogs
> sudo fsck.hfs /dev/sda2
> mount /dev/sda2 /boot/grub -o rw
> apt upgrade
> 
> I used `dmesg | tail` to find why remounting with rw didn't work
> initially.
> 
> James
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.