Re: [PPC] Boot problems after the pci-v6.18-changes

> On 13 October 2025 at 06:47 am, Christian Zigotzky <[email protected]> wrote:
> 
> 
>> On 11 October 2025 at 07:36 pm, Manivannan Sadhasivam <[email protected]> wrote:
>> 
>> Hi Lukas,
>> 
>> Thanks for looping me in. The referenced commit forcefully enables ASPM on all
>> DT platforms as we decided to bite the bullet finally.
>> 
>> Looks like the device (0000:01:00.0) doesn't play nice with ASPM even though it
>> advertises ASPM capability.
>> 
>> Christian, could you please test the below change and see if it fixes the issue?
>> 
>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
>> index 214ed060ca1b..e006b0560b39 100644
>> --- a/drivers/pci/quirks.c
>> +++ b/drivers/pci/quirks.c
>> @@ -2525,6 +2525,15 @@ static void quirk_disable_aspm_l0s_l1(struct pci_dev *dev)
>> */
>> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x1080, quirk_disable_aspm_l0s_l1);
>> 
>> +
>> +static void quirk_disable_aspm_all(struct pci_dev *dev)
>> +{
>> +       pci_info(dev, "Disabling ASPM\n");
>> +       pci_disable_link_state(dev, PCIE_LINK_STATE_ALL);
>> +}
>> +
>> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6738, quirk_disable_aspm_all);
>> +
>> /*
>> * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain
>> * Link bit cleared after starting the link retrain process to allow this
>> 
>> 
>> Going forward, we should be quirking the devices if they behave erratically.
>> 
>> - Mani
>> 
>> --
>> மணிவண்ணன் சதாசிவம்
> 
> Hello Mani,
> 
>> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6738, quirk_disable_aspm_all);
> 
> Is this only for my AMD Radeon HD6870?
> 
> My AMD Radeon HD5870 is also affected.
> 
> And I tested it with my AMD Radeon HD5870.
> 
> What would the line be for all AMD graphics cards?
> 
> Thanks,
> Christian

I see. 0x6738 is for the AMD Radeon HD 6800 series.

It could be, that your patch works because I tested it with an AMD Radeon HD5870 instead of an AMD Radeon HD6870. Sorry 

This could be the correct line for the HD5870:

>> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6898, quirk_disable_aspm_all);

There are some more id numbers for the HD5870.

Correct:

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 214ed060ca1b..e006b0560b39 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2525,6 +2525,15 @@ static void quirk_disable_aspm_l0s_l1(struct pci_dev *dev)
*/
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x1080, quirk_disable_aspm_l0s_l1);

+
+static void quirk_disable_aspm_all(struct pci_dev *dev)
+{
+       pci_info(dev, "Disabling ASPM\n");
+       pci_disable_link_state(dev, PCIE_LINK_STATE_ALL);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6738, quirk_disable_aspm_all);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6898, quirk_disable_aspm_all);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6899, quirk_disable_aspm_all);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x689E, quirk_disable_aspm_all);
+
/*
* Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain
* Link bit cleared after starting the link retrain process to allow this