Re: wireless on debian on Ultra10

hi, thanks

I installed firmware-misc-nonfree
but same messages...

firmware is rt2870.bin or what?

I have : 

/lib/firmware/rt2870.bin
/usr/lib/firmware/rt2870.bin


may be problem because I have 2 other usb cards:

- NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271]
- D-Link Corp. DWA-127 Wireless N 150 High-Gain Adapter(rev.A1) [Ralink 
RT3070]

?


>>n Saturday 26 July 2025 09:34:00 John Paul Adrian Glaubitz wrote:
> Hello,
>
> On Sat, 2025-07-26 at 09:21 +0200, [email protected] wrote:
> > # dmesg |grep rt25
> > [   30.926925] PCI: Enabling device: (0000:02:03.0), cmd 2
> > [   30.927100] rt2500pci 0000:02:03.0: can't ioremap BAR 0: [mem size
> > 0x00002000]
> > [   30.938224] rt2x00pci: rt2x00pci_alloc_reg: Error - Failed to allocate
> > registers
> > [   30.954510] rt2500pci: probe of 0000:02:03.0 failed with error -12
> >
> > #dmesg|grep rt2x
> > [   30.938224] rt2x00pci: rt2x00pci_alloc_reg: Error - Failed to allocate
> > registers
> > [  304.137208] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev
> > 0201 detected
> > [  304.168444] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005
> > detected [  381.169481] ieee80211 phy2: rt2x00lib_request_firmware: Info
> > - Loading firmware file 'rt2870.bin'
> > [  381.187301] ieee80211 phy2: rt2x00lib_request_firmware: Info -
> > Firmware detected - version: 0.36
>
> Make sure the package "firmware-misc-nonfree" is installed which contains
> the firmware for your wireless card.
>
> Adrian