Re: Install Fails on T5240
Tony Rodriguez <[email protected]>
| Newsgroups | gmane.linux.debian.ports.sparc |
|---|---|
| Message-ID | <[email protected]> |
Typically, I agree. However, Samsung dimms "Samsung M395T5160QZ4-CE66 0819" and "Samsung M395T5160QZ4-CE66 0816" both work on my end (without any errors), provided they are all the same type/revision and no mixing between them. I also installed sets of 8 or 16 (each dimm is 4GB and 1.8v.) . Agreed, best to avoid going into that rabbit hole mixing dimms capacities and types (especially on sparc hardware). Keep it simple principal :-) Regards, Tony On 9/3/25 1:34 PM, Dennis Clarke wrote: > On 9/3/25 15:32, Jeremy Leonard wrote: >> Also, >> >> According to this doc: >> >> https://docs.oracle.com/cd/E19712-01/820-3318-14/820-3318-14.pdf >> > > The general rules for these Sun/Oracle systems : > > 1) only use the correct supplier parts. That means Oracle. > If you are buying used stuff then Sun is the supplier. > > 2) get all the memory at once. Never mix and match ever. > > Otherwise you go down a rat hole with no cheese. > >