grub2 1.98+20100710-2: Please update debconf PO translation for the package grub2

Christian Perrier <[email protected]>
Newsgroups gmane.linux.debian.user.japanese
Message-ID <[email protected]>
Hi,

You are noted as the last translator of the debconf translation for
grub2. 

GRUB 2 package templates are likely to be important ones for Squeeze because
of issues related to upgrading from GRUB legacy.
                                                         
Indeed, they're important enough for being counted as part of "D-I level 2"
even though not strictly related to D-I.
                                                            
I issue this specific call for translaiton updates because technical issues prevent
us from including grub2 package debconf statistics in the standard D-I
statistics and pages.
                                                    
I would be grateful if you could take the time and update it.
Please send the updated file as a wishlist bug
against grub2. PLEASE AVOID SENDING IT DIRECTLY TO ME.

There is no strict deadline for receiving the updated translation.

Thanks in advance,
ja.po (text/x-gettext, 8.7 KB)
# Copyright (C) 2008-2009 GRUB Maintainers <[email protected]>
# This file is distributed under the same license as the grub2 package.
# Hideki Yamane (Debian-JP) <[email protected]>, 2008-2009.
#
msgid ""
msgstr ""
"Project-Id-Version: grub2 1.96+20080724-4\n"
"Report-Msgid-Bugs-To: [email protected]\n"
"POT-Creation-Date: 2010-07-02 12:55+0100\n"
"PO-Revision-Date: 2009-10-05 02:07+0900\n"
"Last-Translator: Hideki Yamane (Debian-JP) <[email protected]>\n"
"Language-Team: Japanese <[email protected]>\n"
"Language: ja\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "Chainload from menu.lst?"
msgstr "menu.lst から続けて起動 (チェーンロード)しますか?"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid "GRUB upgrade scripts have detected a GRUB Legacy setup in /boot/grub."
msgstr ""
"GRUB のアップグレードプログラムは GRUB Legacy の設定が /boot/grub にあるのを"
"検出しました。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"In order to replace the Legacy version of GRUB in your system, it is "
"recommended that /boot/grub/menu.lst is adjusted to chainload GRUB 2 from "
"your existing GRUB Legacy setup.  This step may be automaticaly performed "
"now."
msgstr ""
"システム中に存在している以前のバージョンの GRUB を置き換えるためには、/boot/"
"grub/menu.lst にある GRUB Legacy の設定を使って GRUB2 をチェーンロードするよ"
"うに調整するのがお勧めです。この作業は自動的に実行されます。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"It's recommended that you accept chainloading GRUB 2 from menu.lst, and "
"verify that your new GRUB 2 setup is functional for you, before you install "
"it directly to your MBR (Master Boot Record)."
msgstr ""
"MBR (マスタブートレコード) に直接インストールする前に、GRUB 2 が menu.lst か"
"らチェーンロードするように設定し、新しい GRUB 2 の設定が動作するかどうかを確"
"認する事をお勧めします。"

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:2001
msgid ""
"In either case, whenever you want GRUB 2 to be loaded directly from MBR, you "
"can do so by issuing (as root) the following command:"
msgstr ""
"いずれにせよ、GRUB 2 を MBR から直接起動したくなった時いつでも (root にて) 以"
"下のコマンドを入力することで対応できます:"

#. Type: text
#. Description
#. Disk sizes are in decimal megabytes, to match how disk manufacturers
#. usually describe them.
#: ../grub-pc.templates.in:5001
msgid "${DEVICE} (${SIZE} MB, ${MODEL})"
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid "GRUB installation failed.  Continue?"
msgstr ""

#. Type: boolean
#. Description
#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001 ../grub-pc.templates.in:8001
msgid "GRUB failed to install to the following devices:"
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:7001
msgid ""
"Do you want to continue anyway?  If you do, your computer may not start up "
"properly."
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid "GRUB installation failed.  Try again?"
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:8001
msgid ""
"You may be able to install GRUB to some other device, although you should "
"check that your system will boot from that device.  Otherwise, the upgrade "
"from GRUB Legacy will be cancelled."
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid "Continue without installing GRUB?"
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid ""
"You chose not to install GRUB to any devices.  If you continue, the boot "
"loader may not be properly configured, and when your computer next starts up "
"it will use whatever was previously in the boot sector.  If there is an "
"earlier version of GRUB 2 in the boot sector, it may be unable to load "
"modules or handle the current configuration file."
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:9001
msgid ""
"If you are already running a different boot loader and want to carry on "
"doing so, or if this is a special environment where you do not need a boot "
"loader, then you should continue anyway.  Otherwise, you should install GRUB "
"somewhere."
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid "Finish conversion to GRUB 2 now?"
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"This system still has files from the GRUB Legacy boot loader installed, but "
"it now also has GRUB 2 boot records installed on these disks:"
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"It seems likely that GRUB Legacy is no longer in use, and that you should "
"instead upgrade the GRUB 2 images on these disks and finish the conversion "
"to GRUB 2 by removing old GRUB Legacy files.  If you do not upgrade these "
"GRUB 2 images, then they may be incompatible with the new packages and cause "
"your system to stop booting properly."
msgstr ""

#. Type: boolean
#. Description
#: ../grub-pc.templates.in:11001
msgid ""
"You should generally finish the conversion to GRUB 2 unless these boot "
"records were created by a GRUB 2 installation on some other operating system."
msgstr ""

#. Type: string
#. Description
#: ../templates.in:1001
msgid "Linux command line:"
msgstr "Linux コマンド:"

#. Type: string
#. Description
#: ../templates.in:1001
msgid ""
"The following Linux command line was extracted from /etc/default/grub or the "
"`kopt' parameter in GRUB Legacy's menu.lst.  Please verify that it is "
"correct, and modify it if necessary."
msgstr ""
"以下の Linux のコマンドラインは /etc/default/grub か GRUB Legacy の menu.lst "
"上の「kopt」パラメータから取得されています。これが正しいものであるかを確認し"
"て、必要であれば修正してください。"

#. Type: string
#. Description
#: ../templates.in:2001
msgid "Linux default command line:"
msgstr "Linux デフォルトコマンドライン:"

#. Type: string
#. Description
#: ../templates.in:2001
msgid ""
"The following string will be used as Linux parameters for the default menu "
"entry but not for the recovery mode."
msgstr ""
"以下の文字列はリカバリーモードではない通常のメニューエントリでの Linux パラ"
"メータとして使われます。"

#. Type: string
#. Description
#: ../templates.in:3001
msgid "kFreeBSD command line:"
msgstr "kFreeBSD コマンドライン:"

#. Type: string
#. Description
#: ../templates.in:3001
msgid ""
"The following kFreeBSD command line was extracted from /etc/default/grub or "
"the `kopt' parameter in GRUB Legacy's menu.lst.  Please verify that it is "
"correct, and modify it if necessary."
msgstr ""
"以下の kFreeBSD のコマンドラインは /etc/default/grub か GRUB Legacy の menu."
"lst 上の「kopt」パラメータから取得されています。これが正しいものであるかを確"
"認して、必要であれば修正してください。"

#. Type: string
#. Description
#: ../templates.in:4001
msgid "kFreeBSD default command line:"
msgstr "kFreeBSD デフォルトコマンドライン:"

#. Type: string
#. Description
#: ../templates.in:4001
msgid ""
"The following string will be used as kFreeBSD parameters for the default "
"menu entry but not for the recovery mode."
msgstr ""
"以下の文字列はリカバリーモードではない通常のメニューエントリでの kFreeBSD パ"
"ラメータとして使われます。"

#. Type: note
#. Description
#: ../templates.in:5001
msgid "/boot/grub/device.map has been regenerated"
msgstr ""

#. Type: note
#. Description
#: ../templates.in:5001
msgid ""
"The file /boot/grub/device.map has been rewritten to use stable device "
"names.  In most cases, this should significantly reduce the need to change "
"it in future, and boot menu entries generated by GRUB should not be affected."
msgstr ""

#. Type: note
#. Description
#: ../templates.in:5001
msgid ""
"However, since you have more than one disk in your system, it is possible "
"that you were depending on the old device map.  Please check whether you "
"have any custom boot menu entries that rely on GRUB's (hdN) drive numbering, "
"and update them if necessary."
msgstr ""

#. Type: note
#. Description
#: ../templates.in:5001
msgid ""
"If you do not understand this message, or if you do not have any custom boot "
"menu entries, you can ignore this message."
msgstr ""
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.