Re: KDE problem with resuming after inactivity

Hi Michele

Half of your solution works - thanks!

The half that works is where I can go to a console login with ctrl-alt-f2.

But then alt-f1 gives me the boot log and a text console. I cannot co
back to an X screen that works.

On alt-f7 (my local X session) I still have the same windows, but no
response to mouse/keyboard, and
on alt-f8 (a remote X session) there are some buttons that work but
the windows are not filled.

In /var/log/Xorg.0.log.old  it says:
(EE) [mi] EQ overflowing.  Additional events will be discarded until
existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x56) [0x7f2900cf8d46]
(EE) 1: /usr/bin/X (mieqEnqueue+0x24b) [0x7f2900cd9c9b]
(EE) 2: /usr/bin/X (QueuePointerEvents+0x52) [0x7f2900bb0e12]
(EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so
(0x7f28f8774000+0x609a) [0x7f28f877a09a]
(EE) 4: /usr/lib/xorg/modules/input/evdev_drv.so
(0x7f28f8774000+0x655d) [0x7f28f877a55d]
(EE) 5: /usr/bin/X (0x7f2900b42000+0x95918) [0x7f2900bd7918]
(EE) 6: /usr/bin/X (0x7f2900b42000+0xbfbe9) [0x7f2900c01be9]
(EE) 7: /lib/x86_64-linux-gnu/libc.so.6 (0x7f28fe836000+0x35180)
[0x7f28fe86b180]
(EE) 8: /lib/x86_64-linux-gnu/libc.so.6 (ioctl+0x7) [0x7f28fe914be7]
(EE) 9: /usr/lib/xorg/modules/drivers/intel_drv.so
(0x7f28fabfb000+0x2141d) [0x7f28fac1c41d]
(EE) 10: /usr/lib/xorg/modules/drivers/intel_drv.so
(0x7f28fabfb000+0x2475a) [0x7f28fac1f75a]
(EE) 11: /usr/lib/xorg/modules/drivers/intel_drv.so
(0x7f28fabfb000+0x55d0e) [0x7f28fac50d0e]
(EE) 12: /usr/bin/X (BlockHandler+0x4a) [0x7f2900b9df2a]
(EE) 13: /usr/bin/X (WaitForSomething+0x132) [0x7f2900cf5f62]
(EE) 14: /usr/bin/X (0x7f2900b42000+0x57211) [0x7f2900b99211]
(EE) 15: /usr/bin/X (0x7f2900b42000+0x5b596) [0x7f2900b9d596]
(EE) 16: /lib/x86_64-linux-gnu/libc.so.6 (__libc_start_main+0xf5)
[0x7f28fe857b45]
(EE) 17: /usr/bin/X (0x7f2900b42000+0x4590e) [0x7f2900b8790e]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit
higher up the stack.
(EE) [mi] mieq is *NOT* the cause.  It is a victim.
which is related to the X server hanging?

With dmesg, one of the messages I get on start-up is:
[    0.227418] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S1_] (20140424/hwxface-580)
[    0.227425] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep
State [\_S2_] (20140424/hwxface-580)

After the failed wake-up, the end of dmesg reads:

[ 1516.444693] ACPI: Preparing to enter system sleep state S3
[ 1516.444842] PM: Saving platform NVS memory
[ 1516.445458] Disabling non-boot CPUs ...
[ 1516.445497] intel_pstate CPU 1 exiting
[ 1516.446747] kvm: disabling virtualization on CPU1
[ 1516.548344] smpboot: CPU 1 is now offline
[ 1516.548813] intel_pstate CPU 2 exiting
[ 1516.550170] kvm: disabling virtualization on CPU2
[ 1516.652444] smpboot: CPU 2 is now offline
[ 1516.652980] intel_pstate CPU 3 exiting
[ 1516.654247] kvm: disabling virtualization on CPU3
[ 1516.756513] smpboot: CPU 3 is now offline
[ 1516.759646] ACPI: Low-level resume complete
[ 1516.759715] PM: Restoring platform NVS memory
[ 1516.760386] CPU0: Thermal monitoring handled by SMI
[ 1516.760418] Enabling non-boot CPUs ...
[ 1516.760522] x86: Booting SMP configuration:
[ 1516.760523] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 1518.020048] [sched_delayed] sched: RT throttling activated
[ 1518.021273] CPU1: Thermal monitoring handled by SMI
[ 1518.021293] kvm: enabling virtualization on CPU1
[ 1518.023478] Intel pstate controlling: cpu 1
[ 1518.023512] CPU1 is up
[ 1518.023579] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 1518.035548] CPU2: Thermal monitoring handled by SMI
[ 1518.035565] kvm: enabling virtualization on CPU2
[ 1518.037727] Intel pstate controlling: cpu 2
[ 1518.037762] CPU2 is up
[ 1518.037820] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 1518.049788] CPU3: Thermal monitoring handled by SMI
[ 1518.049803] kvm: enabling virtualization on CPU3
[ 1518.051957] Intel pstate controlling: cpu 3
[ 1518.051984] CPU3 is up
[ 1518.055494] ACPI: Waking up from system sleep state S3
[ 1518.056972] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 1518.073053] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1518.073279] PM: noirq resume of devices complete after 16.511 msecs
[ 1518.073580] PM: early resume of devices complete after 0.272 msecs
[ 1518.073936] snd_hda_intel 0000:00:03.0: irq 58 for MSI/MSI-X
[ 1518.074139] mei_me 0000:00:16.0: irq 63 for MSI/MSI-X
[ 1518.074459] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[ 1518.074544] snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
[ 1518.074839] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[ 1518.078368] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 1518.088991] sd 0:0:0:0: [sda] Starting disk
[ 1518.165011] e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
[ 1518.197135] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
[ 1518.409240] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1518.409445] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 1518.410135] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 1518.410462] ata1.00: configured for UDMA/100
[ 1518.489478] usb 1-7: reset high-speed USB device number 6 using xhci_hcd
[ 1518.653960] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88040b9bb1c0
[ 1518.729677] usb 1-8: reset full-speed USB device number 9 using xhci_hcd
[ 1518.858342] usb 1-8: No LPM exit latency info found, disabling LPM.
[ 1518.858780] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88040cbf0e00
[ 1518.858782] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88040cbf0e48
[ 1518.858783] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88040cbf0e90
[ 1518.858784] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88040d01f040
[ 1518.858784] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88040d01f088
[ 1518.929913] usb 1-6.2: reset full-speed USB device number 7 using xhci_hcd
[ 1519.018811] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8800d39d1600
[ 1519.018812] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8800d39d1648
[ 1519.018813] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8800d39d1690
[ 1519.018813] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff8800d39d16d8
[ 1519.090061] usb 1-6.3: reset full-speed USB device number 8 using xhci_hcd
[ 1519.178428] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff88040c29d3c0
[ 1519.178440] usb 1-6.3: ep 0x81 - rounding interval to 1024
microframes, ep desc says 2040 microframes
[ 1519.287830] psmouse serio1: alps: Unknown ALPS touchpad: E7=73 03
0a, EC=88 b3 22
[ 1519.458323] usb 1-6.3.2: reset full-speed USB device number 10 using xhci_hcd
[ 1519.546705] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880036ac4990
[ 1519.546706] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880036ac4948
[ 1519.546707] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called
with disabled ep ffff880036ac4900
[ 1519.546724] usb 1-6.3.2: ep 0x81 - rounding interval to 1024
microframes, ep desc says 2040 microframes
[ 1519.547477] PM: resume of devices complete after 1472.703 msecs
[ 1519.547993] PM: Finishing wakeup.
[ 1519.547994] Restarting tasks ... done.
[ 1519.562303] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 1519.562317] bluetooth hci0: firmware: failed to load
intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq (-2)
[ 1519.562320] bluetooth hci0: Direct firmware load failed with error -2
[ 1519.562322] bluetooth hci0: Falling back to user helper
[ 1519.562827] Bluetooth: hci0 failed to open Intel firmware file:
intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq(-12)
[ 1519.562830] Bluetooth: hci0: Intel Bluetooth firmware file:
intel/ibt-hw-37.8.bseq
[ 1519.566304] Bluetooth: hci0: Intel Bluetooth firmware patch completed
[ 1519.765058] e1000e: eth0 NIC Link is Down
[ 1519.866812] e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
[ 1519.970514] e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
[ 1519.970620] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1520.046592] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1520.067370] e1000e: eth0 NIC Link is Down
[ 1520.067675] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1520.174772] e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
[ 1520.278742] e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
[ 1520.278828] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1520.279407] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 1520.279560] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 1520.287804] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1522.522394] e1000e: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow
Control: Rx/Tx
[ 1522.522397] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 1522.523229] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1522.615220] e1000e: eth0 NIC Link is Down
[ 1522.716962] e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
[ 1522.820798] e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
[ 1522.820877] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1522.823111] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1523.998395] wlan0: authenticate with 00:0b:0e:bf:90:04
[ 1524.000701] wlan0: send auth to 00:0b:0e:bf:90:04 (try 1/3)
[ 1524.012908] wlan0: authenticated
[ 1524.013729] wlan0: associate with 00:0b:0e:bf:90:04 (try 1/3)
[ 1524.017567] wlan0: RX AssocResp from 00:0b:0e:bf:90:04 (capab=0x421
status=0 aid=3)
[ 1524.018189] wlan0: associated
[ 1524.018211] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1524.018249] cfg80211: Calling CRDA for country: NL
[ 1524.020543] cfg80211: Regulatory domain changed to country: NL
[ 1524.020547] cfg80211:  DFS Master region: ETSI
[ 1524.020548] cfg80211:   (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp), (dfs_cac_time)
[ 1524.020551] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz),
(N/A, 2000 mBm), (N/A)
[ 1524.020553] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 1524.020556] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz,
160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 1524.020557] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz),
(N/A, 2700 mBm), (0 s)
[ 1524.020559] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000
KHz), (N/A, 4000 mBm), (N/A)
[ 1524.880297] e1000e: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow
Control: Rx/Tx
[ 1524.880300] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[ 1524.881133] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1526.055391] [drm] stuck on render ring
[ 1526.056140] [drm] GPU HANG: ecode 0:0x00dff888, in Xorg [756],
reason: Ring hung, action: reset
[ 1526.056141] [drm] GPU hangs can indicate a bug anywhere in the
entire gfx stack, including userspace.
[ 1526.056142] [drm] Please file a _new_ bug report on
bugs.freedesktop.org against DRI -> DRM/Intel
[ 1526.056143] [drm] drm/i915 developers can then reassign to the
right component if it's not a kernel issue.
[ 1526.056143] [drm] The gpu crash dump is required to analyze gpu
hangs, so please always attach it.
[ 1526.056144] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[ 1528.053196] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off

So there is a bluetooth problem at 1519.56 (which is probably not it)

And then something with the graphics card at 1526.05 (the terminology
means nothing to me)
I will send the error file to bugs.freedesktop.org.
In the mean time if anyone knows a fix that would be fantastic.

On 22 January 2016 at 18:42, Michele Orsenigo <[email protected]> wrote:
> On Friday 22 January 2016 16:20:25 Alle Meije Wink wrote:
>> I have Jessie running on a Toshiba laptop with an i7-5500u processor
>> and Intel HD 5500 graphics.
>> My window manager is KDE 4.14 with the Plasma interface.
>>
>> As long as I'm working everything is fine but when the screen locks
>> after a time of no interaction, the desktop does not come back up:
>>
>> 1. when the session is set to suspend (in System Settings -> Hardware
>> -> Power Management -> Energy Saving) and a key or mouse press is
>> supposed to bring the session back, I get the (purple) background
>> screen and a mouse pointer, but there is no response to key or mouse
>> presses.
>>
>> 2. when the laptop lid has been closed, a black screen with a mouse
>> pointer appears and no interaction is possible.
>>
>> The default action for suspending the session after inactivity, and
>> also for closing the lid, is "Sleep". If I choose not to suspend the
>> session on AC power, then after inactivity the screen still goes
>> blank, but the session comes back after an interaction.
>>
>> The problem seems to be the "Sleep" setting for inactivity of closing the
>> lid.
>>
>> Does anyone know if this can be fixed other than by deselecting
>> "Suspend Session"?
>>
>> Previous posts about suspend/resume problems with KDE seem to have to
>> do with nvidia drivers. I don't used those though, as I have an Intel
>> card..
>
> Near the same problem and settings ... (on sid)
> On my laptop switching to a console with Ctrl-Alt-F2 and switching back to
> graphic with Alt-F1, it goes back to normality.
> Poor workaround, but maybe useful for diagnosys ...
>
>
>
> --
> Michele Orsenigo
> [email protected]
> ----------------