Bug#925992: upgrade-reports: Suspend no longer working on Thinkpad X1 Carbon after "dist-upgrade" yesterday

This is the Debian list, and I can confirm I have a similar issue on my
T495 Thinkpad with Ubuntu 20.04. When I suspend it goes to the login
screen, when I enter my password it goes into hibernation. When I try to
wake it I am logged in. Used to work fine before recent updates as stated.

On Wed, Jul 29, 2020 at 9:09 PM Abdullah <[email protected]> wrote:

>
> I'm running Arch Linux right now and have no problems with X1 Carbon on
> suspension.
>
>
> On 29/07, Walter Montes wrote:
> >Hi there,
> >
> >I have excatly the same issue after installing Ubuntu 20.04 in my Thinkpad
> >Helix. With Ubuntu 18.04 I had no problems ...
> >Could you fix that?
> >This could help:
> >https://www.mail-archive.com/[email protected]/msg5512720.html
> >
> >But if you have a better solution, please let me know
> >
> >On Fri, 29 Mar 2019 14:46:59 -0700 Ali Sayed <[email protected]> wrote:
> >> Package: upgrade-reports
> >> Severity: normal
> >>
> >> Dear Maintainer,
> >>
> >>
> >> After running "apt get dist-upgrade" and upgrading to
> >vmlinuz-4.19.0-4-amd64 I noticed that I can no longer suspend my laptop
> >either by closing the lid or manually. This used to work before the
> >upgrade. I also noticed that the touchpad was no longer working with my
> >XFCE desktop.
> >>
> >> Upon further investigation I noticed the synaptics touchpad driver was
> >missing so I installed the package xserver-xorg-input-synaptics and
> >rebooted my system. I was able to Suspend once right after the reboot but
> >then it no longer works. also the tocuhpad worked right after the reboot
> >but not after my repeated attempts to suspend.
> >>
> >> Here is out from "dmesg"
> >>
> >> [27361.594572] PM: suspend entry (s2idle)
> >> [27361.594573] PM: Syncing filesystems ... done.
> >> [27361.613865] Freezing user space processes ... (elapsed 0.001 seconds)
> >done.
> >> [27361.615612] OOM killer disabled.
> >> [27361.615613] Freezing remaining freezable tasks ... (elapsed 0.001
> >seconds) done.
> >> [27361.616806] Suspending console(s) (use no_console_suspend to debug)
> >> [27361.620724] rmi4_f01 rmi4-00.fn01: Failed to write sleep mode: -6.
> >> [27361.620727] rmi4_f01 rmi4-00.fn01: Suspend failed with code -6.
> >> [27361.620729] rmi4_physical rmi4-00: Failed to suspend functions: -6
> >> [27361.620733] rmi4_smbus 1-002c: Failed to suspend device: -6
> >> [27361.620740] dpm_run_callback(): rmi_smb_suspend+0x0/0x50 [rmi_smbus]
> >returns -6
> >> [27361.620743] PM: Device 1-002c failed to suspend: error -6
> >> [27361.657382] PM: Some devices failed to suspend, or early wake event
> >detected
> >> [27361.915062] OOM killer enabled.
> >> [27361.915064] Restarting tasks ...
> >> [27361.916391] rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to
> >change enabled interrupts!
> >> [27361.916401] psmouse: probe of serio2 failed with error -1
> >> [27361.916411] done.
> >> [27361.927609] PM: suspend exit
> >> [27362.156899] e1000e: enp0s25 NIC Link is Down
> >> [27362.235054] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
> >> [27362.449650] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
> >> [27362.514062] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
> >> [27362.765765] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
> >> [27363.033796] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
> >> [27363.094240] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
> >> [27366.354289] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
> >> [27369.330559] wlp3s0: authenticate with 84:61:a0:66:b3:30
> >>
> >>
> >> I no longer have the older vmlinuz-4.19.0-2-amd64 kernel on this system
> >to test if this is a bug due to the new kernel or something else. I will
> >continue to investigate on my end. I do have acpitool, tp-smapi-dkms and
> >tpb installed. Additionally XFCE power manager is set to suspend when the
> >lid is closed and that is no longer working.
> >>
> >> thanks
> >> -ali
> >>
> >>
> >>
> >>
> >> -- System Information:
> >> Debian Release: buster/sid
> >> APT prefers testing
> >> APT policy: (500, 'testing')
> >> Architecture: amd64 (x86_64)
> >>
> >> Kernel: Linux 4.19.0-4-amd64 (SMP w/4 CPU cores)
> >> Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
> >> Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8),
> >LANGUAGE=en_US.utf8 (charmap=UTF-8)
> >> Shell: /bin/sh linked to /bin/dash
> >
> >Walter Montes
>
>
> Abdullah
>
> https://abdullah.today
>
> C20F 2707 3025 2569 BAC5
> 534B 7820 6670 C19D 1580
>


-- 
Met vriendelijke groeten,



Julian Rutten