Re: Boot Debian 13 from external SSD USB 3.0 which is connected to external USB 3.0 adapter

Tomas <[email protected]> Wed, 15 Jul 2026 07:08:36 +0200
Newsgroups gmane.linux.debian.user
Message-ID <[email protected]>
On Tue, Jul 14, 2026 at 10:18:36PM +0200, Pantelis Papadopoulos wrote:
> Thanks for your reply.
> On the website of the external USB 3.0 adapter states that it supports various Linux kernels.
> So, I suppose that the kernel of Debian 13 could support it.
> 
> Do your guide steps lead to booting from USB 3.0 disk on the USB 3.0 adapter and having USB 3.0 speeds in general?

We can't boot from the USB3, since the drivers are not available
until the boot is done (i.e. the kernel loaded).

> Do they include:
> - kernel + initramfs on USB 2.0 and root filesystem on USB 3.0?
> or
> - kexec (boot minimal Linux on USB 2.0, then jump to USB 3.0 kernel)?

I would try the first route. I currently don't see any advantage to
the second (in both cases you depend on your USB2 drive to boot).

> You may tell me the details of your guide steps and I will see what I could try with that.

I proposed first to try a Debian live or installer on your USB2 to
make sure the kernel coming with it can talk to your USB3 hardware.

For example: if you start the Debian installer off the USB2: does
it offer the USB3 drive as one possible install target? In that
case the drivers would be there.

I haven't got a ready-made instruction manual per se, but we can
take it from here with the help of others :)

Cheers
-- 
tomás
signature.asc (application/pgp-signature, 195 B)
-----BEGIN PGP SIGNATURE-----

iF0EABECAB0WIQRp53liolZD6iXhAoIFyCz1etHaRgUCalcVzQAKCRAFyCz1etHa
RlfvAJ0TWFSewubrXDSRhUNz7HY/KFfQjACdGX9Dhj/vHKmc5FEjw+9VaTuC/gw=
=sbF3
-----END PGP SIGNATURE-----