Re: New install - boot, 'startx', freeze.

"Lucas C. Villa Real" <[email protected]>
Newsgroups gmane.linux.distributions.gobo.general
Message-ID <CAAvzgtaVbRA4ac5SoLkZXjd=quLRkp6o9ZQq+RMw6S5oRz95RQ@mail.gmail.com>
Hi Mark,

That's good news. Did you choose the Full installation profile?

Lucas

On Thu, Apr 2, 2015 at 4:26 AM, Mark Filipak <[email protected]>
wrote:

> Hi Lucas,
>
> There's been a development.
>
> I booted to the live CD and this time I was able to find and install the
> VBox Guest Addtions. I can tell that the install worked because mouse
> integration worked -- I could drag the mouse into & out of the VM
> without having to hit the guest home key (right-ctrl).
>
> With the VBox Guest Additions installed, I then installed Gobo fresh
> with reformat.
>
> What's new:
> Whereas when I booted previously and submitted "startx" I got a large
> gray window with only an immovable mouse cursor in the center, now when
> I submit "startx" I stay at a command line, and I get this response:
> =====
> root@NewMachine ~]startx
> xauth:  file /Users/root/.serverauth.1229 does not exist
>
> /usr/bin/X: error while loading shared libraries: libnettle.so.4: cannot
> open shared object file: No such file or directory
> xinit: giving up
> xinit: unable to connect to X server: Network is unreachable
> xinit: server error
> root@NewMachine ~]_
> =====
> '/Users/root/' has 9 dotted file & 7 dotted directories & 'Desktop', but
> it does not have '.serverauth.1229' (whatever that is).
>
> I can't tell whether this is progress or not.
>
> - Mark.
>
>
>
> On 03/31/2015 09:02 AM, Lucas C. Villa Real wrote:
> > Hi Mark,
> >
> > I'll have to install VirtualBox on my side to reproduce the problem.
> > This week is a very busy one for me, but I will do my best to give you
> > some advice on how to work around that issue soon.
> >
> > Lucas
> >
> > On Mon, Mar 30, 2015 at 10:30 AM, Mark Filipak
> > <[email protected] <mailto:[email protected]>>
> wrote:
> >
> >     Hey Lucas,
> >
> >     In addition to what I wrote below (especially see the end of this
> >     message == end of previous message), I have this:
> >     =====
> >     lspci
> >     00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma]
> >     (rev 02)
> >     00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA
> >     [Natoma/Triton II]
> >     00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE
> >     (rev 01)
> >     00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH
> >     VirtualBox Graphics Adapter
> >     00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit
> Ethernet
> >     Controller (rev 02)
> >     00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox
> Guest
> >     Service
> >     00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97
> >     Audio Controller (rev 01)
> >     00:06.0 USB controller: Apple Inc. KeyLargo/Intrepid USB
> >     00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
> >     00:0d.0 SATA controller: Intel Corporation 82801HM/HEM
> (ICH8M/ICH8M-E)
> >     SATA Controller [AHCI mode] (rev 02)
> >     -----
> >     The above matches what 'lspci' outputs in my Linux Mint VM (which
> works
> >     fine).
> >     BTW, I'm running the latest VirtualBox.
> >     I don't want to give up on Gobo, but I'm pretty clueless. - Mark.
> >     =====
> >
> >     On 03/26/2015 10:44 PM, Lucas C. Villa Real wrote:
> >     -snip-
> >     > The thing about Gobo trying to sniff out the VM is because Xorg's
> >     > automatic configuration either hangs when probing certain drivers
> or
> >     > produces settings that will not work when the host is under QEMU
> (at
> >     > least that is what my experience has shown). For that reason, we
> ship a
> >     > default xorg.conf that QEMU deals with just fine.
> >
> >     "...default xorg.conf" ?????
> >
> >     dingdingdingdingdingdingdingdingding
> >
> >     I installed Gobo all 3 ways. I kept notes. The following is from my
> >     notes:
> >     =====
> >     Original '/System/Settings/X11/xorg.conf'...
> >
> >     -- Selecting the "Base" package doesn't install X, so
> >     '/System/Settings/X11/' is empty.
> >
> >     -- Selecting the 'Typical' package doesn't install
> >     '/System/Settings/X11/xorg.conf'.
> >
> >     -- Selecting the 'Full' package doesn't install
> >     '/System/Settings/X11/xorg.conf'.
> >     =====
> >     Bottom line: Unless I create 'xorg.conf', it doesn't exist.
> >
> >     > Now, I remember facing a similar problem before: the mouse would
> just
> >     > not work on QEMU for some weird reason. However, I noticed that by
> >     > forcing Udev to get device events from the kernel one more time
> >     > ("udevadm trigger"), the input device would then be discovered.
> >
> >     Ahhhh.... I remember something similar in VMware many years ago. It
> was
> >     not sniffing the VM. It was sniffing the (virtualized) hardware.
> Lord...
> >     I can't remember the details. All I remember is that a VMware client
> >     needed to do some sort of mojo to get the (virtualized) hardware to
> >     work. VMware eventually was able to fix that at the virtual end
> instead
> >     of at the OS-driver end, but I can't remember how they did it.
> >
> >     > Two simple things that you can do are:
> >     > 1) type 'udevadm trigger' in the console
> >     > 2) type 'gpm -m /dev/input/mice -t imps2' and check that the cursor
> >     > moves in the console
> >
> >     Re #1: What's supposed to happen?
> >     Re #2: The tty console has no mouse, so how can I move it?
> >
> >     I did the 2 steps above and took a screen shot here:
> >     http://markfilipak.com/GoboLinux.png
> >
> >     The cursor didn't do anything special.
> >
> >     _______________________________________________
> >     gobolinux-users mailing list
> >     [email protected]
> >     <mailto:[email protected]>
> >     http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
> >
> >
> >
> >
> > --
> > Lucas
> > "If you're looking for a reason I've a reason to give: pleasure, little
> > treasure"
> >
> >
> > _______________________________________________
> > gobolinux-users mailing list
> > [email protected]
> > http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
> >
> _______________________________________________
> gobolinux-users mailing list
> [email protected]
> http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
>



-- 
Lucas
"If you're looking for a reason I've a reason to give: pleasure, little
treasure"

_______________________________________________
gobolinux-users mailing list
[email protected]
http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.