Re: Rock 2.0.3 and SATA

Hi,

Since this message remains unanswered I drop a note for the humble user:

> I've just Download Rock 2.0.3 Crystal-Emu as Iso Image, and now I've
> tried To Install on an SATA only
> System. But every Time stone told me that he found no Harddisk.wich
> switch must I Choice to told Rock
> That he has to check the SATA bus.

There is no switch whatsoever to tell stone to do something with your SATA 
devices. You need a kernel with SATA support and they will show up as scsi 
devices and stone will use them just fine.

You need to build a custom ISO with ROCK since ROCK does not include SATA in 
the default kernel. However if you are lucky they are available as modules 
and you can modprobe them - though IIRC they are not. The same applies for 
the T2 2.1 stable series.

For greated user experience I could recommend the fully modular kernel with 
hotplug++ in the early user-space to recognize any hardware needed to boot as 
done in the T2 2.2 tree.

You can grab a demo Live CD here (master mirror on the university you 
study ...):

  http://www.t2-project.org/live/

Though a bit half-topic it might help the user ... 

> Data for the System
>    CPU :        AMD64
>    Mainboard with the SIS755 Nothbrige and SIS964 Southbrige
>    Harddisk : Maxor 100 GB
>    Ramsize   : 1GB

-- 
René Rebe - Rubensstr. 64 - 12157 Berlin (Europe / Germany)
            http://www.exactcode.de | http://www.t2-project.org
            +49 (0)30  255 897 45

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.6 (GNU/Linux)

iD8DBQBCsVdeQuICExGFvYIRAvc6AJ9UznviEAoq6WVm37ORFcHU8iCu8wCeNyHQ
iUq41/5CfEjzCtlIT+sB5wE=
=fKKJ
-----END PGP SIGNATURE-----