Re: kernel-scsi.conf
"Florin Muntean" <[email protected]>
| Newsgroups | gmane.linux.distributions.rock.devel |
|---|---|
| Message-ID | <[email protected]> |
If I set all the _MD as modules is working for me. I will try to see if I set only the RAID5 as module. Thanks, Florin Muntean -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Stefan Fiedler Sent: Thursday, December 01, 2005 3:04 AM To: ROCK Development Mailing List Subject: Re: [rock-devel] kernel-scsi.conf Am Dienstag 29 November 2005 21:15 schrieb Florin Muntean: > Hi, > > I don't know if it is just me or somebody else have the same problem: > > By default the CONFIG_MD is enabled in the kernel for software raid. > I did try on two Pentium2 machines and it seems that they are giving > me a kernel panic if the CONFIG_MD is enabled. > In Virtual PC is working just fine. > > Does anybody have an Ideea why? I would like to be able to use > software RAID on the real machines. > Hi Florin, maybe the kernel module is broken for your specific hardware? That does happen once in a while. You should try to isolate the error: unless we know whether it's in the kernel or in ROCK, there's not much that can be done. If the bug is kernel related, you may want to try different kernel versions, configurations, boot options or mainlines. Tayloring the kernel config to your hardware may also help E.g. the saa7134 module in 2.6.14.2 currently works for my PC only if "irqpoll" boot option is used. Some weeks ago it worked only in 2.4 kernels. Vice versa, some older 2.4 SMP kernels would not boot on my UP mainboard. With best regards, Stefan Fiedler > Thanks > Florin Muntean > > _______________________________________________ > rock-devel mailing list > [email protected] > http://www.rocklinux.net/mailman/listinfo/rock-devel _______________________________________________ rock-devel mailing list [email protected] http://www.rocklinux.net/mailman/listinfo/rock-devel