Two 3c509b at the same time

Hi!
I have problems getting two 3c509b cards working
concurrently. They seem to be detected correctly at
start. Both of the NIC:s status indicators are on at
start, but when the network is setup one of the status
lamps stops (eth1). The eth0 card works, but the eth1
doesnt.


In my /etc/modules.conf I have put:
alias eth0 3c509
alias eth1 3c509

I have also tried to specify irq and dma via options
but it doesnt make any difference.

/var/log/boot.msg looks like this:


Inspecting /boot/System.map-2.2.18
Loaded 10080 symbols from /boot/System.map-2.2.18.
Symbols match kernel version 2.2.18.
Loaded 57 symbols from 2 modules.
klogd 1.3-3, log source =3D ksyslog started.
<4>Linux version 2.2.18 ([email protected]) (gcc
version 2.95.2 19991024 (release)) #1 Wed Jan 24
12:28:55 GMT 2001

..snip..

<4>eth0: 3c509 at 0x300 tag 1, 10baseT port, address=20
00 20 af f2 19 93, IRQ 10.
<4>3c509.c:1.16 (2.2) 2/3/98
[email protected].
<4>eth1: 3c509 at 0x210 tag 2, 10baseT port, address=20
00 60 08 7d 68 3f, IRQ 11.
<4>3c509.c:1.16 (2.2) 2/3/98
[email protected].



I am using Suse 7.1.

Anyone that can help me?

Best wishes,
Thomas

_____________________________________________________
G=E5 f=F6re i k=F6n och f=E5 din sajt v=E4rderad p=E5 nolltid med Yahoo! =
Express
Se mer p=E5: http://se.docs.yahoo.com/info/express/help/index.html