Problem with aacraid & Red Hat 7.3
Christophe Dupre <[email protected]>
| Newsgroups | gmane.linux.drivers.aacraid.devel |
|---|---|
| Message-ID | <[email protected]> |
I have a Dell PowerEdge 6450 server with a PERC2 controller. Everything was working well until this morning, running Red Hat 7.2. This morning, I upgraded the BIOS to A12, the Embedded controllers firmware and the PERC2 embedded controller firmware to the latest version on Dell's web site. I also reinstalled the machine using Red Hat 7.3. The basic installating worked flawlessly, but after running up2date to upgrade all the packages (including kernel), the machine refused to boot. It stops after switching to run level 3. The last message on the screen is: Unhandled SCSI Command: 0x4d. I rebooted the system with the previous kernel (linux.bak in LILO) and I noticed the same 'Unhandled SCSI Command: 0x4d' message, but the sequence completed and I got the login prompt. Help, suggestions or pointers would be appreciated. -- Christophe Dupre System Administrator, Scientific Computation Research Center Rensselaer Polytechnic Institute Troy, NY USA Phone: (518) 276-2578 - Fax: (518) 276-4886 _______________________________________________ Linux-aacraid-devel mailing list [email protected] http://lists.us.dell.com/mailman/listinfo/linux-aacraid-devel Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/