aacraid failures, more info
James Bourne <jbourne-sgccOOZBWRqw5LPnMra/[email protected]> Sat, 9 Aug 2003 19:45:20 -0600 (MDT)
| Newsgroups | gmane.linux.drivers.aacraid.devel,gmane.linux.hardware.dell.poweredge |
|---|---|
| Message-ID | <[email protected]> |
HI, thought I'd forward this along as well. I thought, before I reboot the system that has the failed drive, that I'd go into afacli and see if I can see anything interesting. Under diag in the history for the controller, I found many error messages. Don't know if they will help, but here they are. FWIW, it actually looks like some of these are passed directly back to the driver, or at least are reproduced in the driver exactly as they are in the controller history. Here are the messages. _diagnostic > show history Executing: diagnostic show history No switches specified, defaulting to "/current". *** HISTORY BUFFER FROM CURRENT CONTROLLER RUN *** [00]: ID(1:03:0) Timeout detected on cmd[0x28] [01]: ID(1:03:0): Timeout detected on cmd[0x28] [02]: <...repeats 2 more times> [03]: SCSI Channel[1]: Timeout Detected On 4 Command(s) [04]: ID(1:03:0) Cmd[0x28] Fail: Block Range 10738560 : 10738687 [05]: at 335887 sec [06]: ID(1:03:0) - IO failed, Cmd[0x28] [07]: ID(1:03:0) Cmd[0x28] Fail: Block Range 8015 : 8062 at 33588 [08]: 7 sec [09]: ID(1:03:0) Cmd[0x28] Fail: Block Range 18505423 : 18505471 [10]: at 335887 sec [11]: ID(1:03:0) Cmd[0x28] Fail: Block Range 10738304 : 10738431 [12]: at 335887 sec [13]: RAID5 Container 1 Drive 1:3:0 Failure [14]: ID(1:03:0): Timeout detected on cmd[0x28] [15]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [16]: ID(1:03:0): Timeout detected on cmd[0x28] [17]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [18]: ID(1:03:0): Timeout detected on cmd[0x28] [19]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [20]: ID(1:03:0): Timeout detected on cmd[0x28] [21]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [22]: ID(1:03:0): Timeout detected on cmd[0x28] [23]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [24]: ID(1:03:0) Timeout detected on cmd[0x28] [25]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [26]: ID(1:03:0): Timeout detected on cmd[0x28] [27]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [28]: ID(1:03:0): Timeout detected on cmd[0x28] [29]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [30]: ID(1:03:0): Timeout detected on cmd[0x28] [31]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [32]: ID(1:03:0): Timeout detected on cmd[0x28] [33]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [34]: ID(1:03:0): Timeout detected on cmd[0x28] [35]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [36]: ID(1:03:0) Timeout detected on cmd[0x28] [37]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [38]: ID(1:03:0): Timeout detected on cmd[0x28] [39]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [40]: ID(1:03:0): Timeout detected on cmd[0x28] [41]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [42]: ID(1:03:0): Timeout detected on cmd[0x28] [43]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [44]: ID(1:03:0): Timeout detected on cmd[0x28] [45]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [46]: ID(1:03:0): Timeout detected on cmd[0x28] [47]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [48]: ID(1:03:0) Timeout detected on cmd[0x28] [49]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [50]: ID(1:03:0): Timeout detected on cmd[0x28] [51]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [52]: ID(1:03:0): Timeout detected on cmd[0x28] [53]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [54]: ID(1:03:0): Timeout detected on cmd[0x28] [55]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [56]: ID(1:03:0): Timeout detected on cmd[0x28] [57]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [58]: ID(1:03:0): Timeout detected on cmd[0x28] [59]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [60]: ID(1:03:0): Timeout detected on cmd[0x28] [61]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [62]: ID(1:03:0) Timeout detected on cmd[0x28] [63]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [64]: ID(1:03:0): Timeout detected on cmd[0x28] [65]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [66]: ID(1:03:0): Timeout detected on cmd[0x28] [67]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [68]: ID(1:03:0): Timeout detected on cmd[0x28] [69]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [70]: ID(1:03:0): Timeout detected on cmd[0x28] [71]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [72]: ID(1:03:0): Timeout detected on cmd[0x28] [73]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [74]: ID(1:03:0) Timeout detected on cmd[0x28] [75]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [76]: ID(1:03:0): Timeout detected on cmd[0x28] [77]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [78]: ID(1:03:0): Timeout detected on cmd[0x28] [79]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [80]: ID(1:03:0): Timeout detected on cmd[0x28] [81]: SCSI Channel[1]: Timeout Detected On 1 Command(s) [82]: ID(1:03:0) Cmd[0x28] Fail: Block Range 0 : 0 at 336214 sec [83]: 2 can't read mbr dev_t:3 [84]: <...repeats 1 more times> [85]: can't read config from slice #[3] [86]: 2 can't read mbr dev_t:3 [87]: can't read config from slice #[3] [88]: CT_LogMissingEntry: Log missing entry, container 1, dev 131 [89]: , signature 0xa079c177, nvEntry 326 [90]: CtMarkDead: container 1, deadEntry 1, dev 131, signature 0x [91]: a079c177 [92]: CtMarkDead: container 1, deadEntry 1, dev 131, signature 0x [93]: a079c177 [94]: CtMarkDead: container 1, deadEntry 1, dev 131, signature 0x [95]: a079c177 [96]: RAID5 Failover Container 1 No Failover Assigned [97]: Drive 1:3:0 returning error [98]: 2 can't read mbr dev_t:3 [99]: Regards James Bourne -- James Bourne, Supervisor Data Centre Operations Mount Royal College, Calgary, AB, CA www.mtroyal.ab.ca "There are only 10 types of people in this world: those who understand binary and those who don't." ***************************************************************************** This communication is intended for the use of the recipient to which it is addressed, and may contain confidential, personal, and or privileged information. Please contact the sender immediately if you are not the intended recipient of this communication, and do not copy, distribute, or take action relying on it. Any communication received in error, or subsequent reply, should be deleted or destroyed. ***************************************************************************** _______________________________________________ Linux-aacraid-devel mailing list [email protected] http://lists.us.dell.com/mailman/listinfo/linux-aacraid-devel Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/