aacraid hungs if syslogd is running

Hi!  I tested several kernels: 2.4.18.. 2.4.19 for SMP. And found that 
aacraid module hungs the system if syslogd is running. It works properly 
for example if we load this module from initrd image. It is loaded and 
unloaded without problem if syslogd is stopped (by modprobe/insmod/rmmod).

It seems there is a bug during startup. I looks like something tries to 
make syslog output during rescheduling. I removed all printk output from 
the driver but got the same results. So it is not caused by driver's 
printk output.

PS: Some useful information:

Raid Controller: ADAPTEC 2120S
Red Hat's kernel-2.4.18-3 (smp) i386

filename:    aacraid.o
description: "Supports Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec 2120S, 2200S, 5400S, and HP NetRAID-4M devices. 
		http://domsch.com/linux/ or 
		http://linux.adaptec.com"
author:      "Red Hat Inc and Adaptec"
license:     "GPL"
parm:        nondasd int, description "Control scanning of hba for nondasd 
devices. 0=off, 1=on"
parm:        paemode int, description "Control whether dma addressing is 
using PAE. 0=off, 1=on"



Cheers,YP
-
Mr. Yaroslav Popovitch [email protected]       - tel. +372 6419975
SOT Finnish Software Engineering Ltd.   - fax  +372 6419975
Kreutzwaldi 7-4, 10124  TALLINN         - http://www.sot.com
ESTONIA                                 - http://sotlinux.net


_______________________________________________
Linux-aacraid-devel mailing list
[email protected]
http://lists.us.dell.com/mailman/listinfo/linux-aacraid-devel
Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/