Linux 2.4.24 reboot hangs

Hi,

We are experiencing some problems with PE2650s and new aacraid driver
in Linux 2.4.24. AACRAID driver hangs sporadicaly on boot when I do
"reboot" or "shutdown" from Linux shell, most of the time power off/on
is enough but sometimes only solution is to remove AC plugs from PSUs
for a 30 secs or so to get the system boot up normally.

This is last thing seen on screen when lockup happens.

SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver (1.1-3 Jan 13 2004 13:10:39)
AAC0: kernel 2.7.4 build 3170
AAC0: monitor 2.7.4 build 3170
AAC0: bios 2.7.0 build 3170
AAC0: serial 6d7010d3fafaf001
scsi0 : percraid

Problem can be reproduced on several servers, so it is not a unique
hardware problem. System BIOS and AACRAID firmware are the lastest.

I copied aacraid driver from 2.4.22 to a 2.4.24 tree and now system
starts corretly on every boot.

-- 
 // Tomi Hakala
// Song Networks, System Services

_______________________________________________
Linux-aacraid-devel mailing list
[email protected]
http://lists.us.dell.com/mailman/listinfo/linux-aacraid-devel
Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/