RE: at76c503a on Startup (boot)

	First of Happy New Year to all!!!!  And Thanks for the help so far!

Here is where things stand with error messages:

make

 CC [M]  /root/temp/temp/at76c503a/at76c503.o
/root/temp/temp/at76c503a/at76c503.c: In function `ieee80211_to_eth':
/root/temp/temp/at76c503a/at76c503.c:3922: warning: assignment from
incompatible pointer type
  CC [M]  /root/temp/temp/at76c503a/at76_usbdfu.o
  Building modules, stage 2.
  MODPOST
  CC      /root/temp/temp/at76c503a/at76_usbdfu.mod.o

But, I still get a at76c503.o file and no errors at the end of make.  Make
install runs fine too.  


plug-in WUSB11 v2.6
dmesg displays the following

usb 2-1: new full speed USB device using address 2
/root/temp/temp/at76c503a/at76_usbdfu.c: USB Device Firmware Upgrade (DFU)
handler v0.12beta22-static loading
/root/temp/temp/at76c503a/at76c503.c: Generic Atmel at76c503/at76c505
routines v0.12beta22-static
/root/temp/temp/at76c503a/at76c503-fw_skel.c: Atmel at76c503 (RFMD) Wireless
LAN Driver v0.12beta22-static loading
/root/temp/temp/at76c503a/at76c503-fw_skel.c: using compiled-in firmware
usbcore: registered new driver at76c503-rfmd
usb 2-1: reset full speed USB device using address 2
usb 2-1: device firmware changed
usb 2-1: USB disconnect, address 2
/root/temp/temp/at76c503a/at76c503-fw_skel.c: wlan%d disconnecting
/root/temp/temp/at76c503a/at76c503-fw_skel.c: at76c503-rfmd disconnected
usb 2-1: new full speed USB device using address 3
/root/temp/temp/at76c503a/at76c503-fw_skel.c: using compiled-in firmware
/root/temp/temp/at76c503a/at76c503.c: unexpected opmode 185

from
less /var/log/messages

Jan  2 22:45:18 atlantis kernel: usb 2-1: new full speed USB device using
address 2
Jan  2 22:45:19 atlantis kernel: /root/temp/temp/at76c503a/at76_usbdfu.c:
USB Device Firmware Upgrade (DFU) handler v0.12beta22-static loading
Jan  2 22:45:19 atlantis kernel: /root/temp/temp/at76c503a/at76c503.c:
Generic Atmel at76c503/at76c505 routines v0.12beta22-static
Jan  2 22:45:19 atlantis kernel:
/root/temp/temp/at76c503a/at76c503-fw_skel.c: Atmel at76c503 (RFMD) Wireless
LAN Driver v0.12beta22-static loading
Jan  2 22:45:20 atlantis kernel: usbcore: registered new driver
at76c503-rfmd
Jan  2 22:45:21 atlantis kernel: usb 2-1: reset full speed USB device using
address 2
Jan  2 22:45:22 atlantis kernel: usb 2-1: device firmware changed
Jan  2 22:45:22 atlantis kernel: usb 2-1: USB disconnect, address 2
Jan  2 22:45:22 atlantis kernel:
/root/temp/temp/at76c503a/at76c503-fw_skel.c: wlan%%d disconnecting
Jan  2 22:45:22 atlantis kernel:
/root/temp/temp/at76c503a/at76c503-fw_skel.c: at76c503-rfmd disconnected
Jan  2 22:45:22 atlantis kernel: usb 2-1: new full speed USB device using
address 3
Jan  2 22:45:22 atlantis kernel: /root/temp/temp/at76c503a/at76c503.c:
unexpected opmode 185


So does this mean I am having problems downloading the firmware on my KT133
chip set?  Should I try and spend money on a cheap USB hub??  Please let me
know.  Thanks Again!!





-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of CE
Sent: Wednesday, December 29, 2004 1:04 AM
To: [email protected]
Subject: Re: [at76c503a-user] at76c503a on Startup (boot)

	Try (as root) less /var/log/messages.


You Wrote:

>  
> 
>  
> 
>             Just to show you how much of a NOOB I am. you really lost me
> with the below statement.  Are you saying that in the dmesg I would find a
> message hotplug followed directory by an error message after it?  Also, is
> there some other place I could be looking for more information that might
> help like sometime of log or such?
_______________________________________________
at76c503a-user mailing list
[email protected]
http://lists.berlios.de/mailman/listinfo/at76c503a-user