Re: at76c503a-user digest, Vol 1 #471 - 1 msg

Further to my previous email, I have discovered, by looking under the 
velcro thingy, that it is a WUSB11 V4.
Thanks in advance for any advice.

>Date: Sat, 16 Apr 2005 11:46:55 +0100
>From: "David W. Legg" <[email protected]>
>To: [email protected]
>Subject: [at76c503a-user] Linksys (Alinx) W11USB
>Reply-To: [email protected]
>
>Hello people,
>
>I thought I would be able to get my Linksys WUSB11 802.11b USB device 
>going in a jiffy using the berlios drivers. And, sure enough, they 
>compiled and installed without a hitch.
>
>However, the correct driver would not load (by hotplug) so I did an lusb 
>which showed the device to be an 'Alinx Corp' device. The idVendor is 
>0x13b1; the idProduct is 0x000b.
>
>So, I changed the vendor and product ids in all the driver .c files like so:
>
>#define VENDOR_ID_LINKSYS             0x13b1
>#define PRODUCT_ID_LINKSYS_WUSB11_V21 0x000b
>
>and then tried modprobing each module like so:
>
>modprobe -v at76c503-i3861
>
>However, each time, I got messages in /var/log/messages like this (in 
>particular, note the firmware load failure wi th error -22):
>
>Apr 16 11:21:22 aldebaran kernel: 
>/home/daddy/APPS/WLAN/at76c503a/at76_usbdfu.c: USB Device Firmware 
>Upgrade (DFU) handler v0.12beta23-static loading
>Apr 16 11:21:22 aldebaran kernel: 
>/home/daddy/APPS/WLAN/at76c503a/at76c503.c: Generic Atmel 
>at76c503/at76c505 routines v0.12beta23-static
>Apr 16 11:21:22 aldebaran kernel: 
>/home/daddy/APPS/WLAN/at76c503a/at76c503-fw_skel.c: Atmel at76c503 
>(i3861) Wireless LAN Driver v0.12beta23-static loading
>Apr 16 11:21:22 aldebaran kernel: usbcore: registered new driver 
>at76c503-i3861
>Apr 16 11:21:22 aldebaran kernel: 
>/home/daddy/APPS/WLAN/at76c503a/at76c503.c: downloading internal fw 
>failed with -22
>
>I used the latest CVS tarball from the berlios web site, with dates like 
>this:
>$Id: at76c503.c,v 1.74 2005/03/08 01:33:14 jal2 Exp $
>
>I am using a fully updated Fedora Core 3 with a 2.6.11-1.14_FC3 kernel.
>
>I haven't yet tried turning kernel debugging on in /etc/syslog.conf.
>
>Grateful for any assistance.
>
>
>
>--__--__--
>
>_______________________________________________
>at76c503a-user mailing list
>[email protected]
>http://lists.berlios.de/mailman/listinfo/at76c503a-user
>
>
>End of at76c503a-user Digest
>
>
>  
>