Re: Berlios driver: version 0.12beta1 - cvs main trunk supports both 2.4.x and 2.6.0

Hi Alex,

On Fri, 26 Dec 2003, Alex Schultz wrote:

> For some reason it stopped working. The next time I started up, it
> doesn't work. I look in dmesg and I noticed that there are some wrong
> board type errors. Please note, I'm not using the standard version or
> the driver, I modified it to use the acc firmware, otherwise the radio
> doesn't turn on (I'm using the SMC 2662 V.2, My mods to use the acc
> firmware work properly with the 2.4.x kernel version). I tried it
> without my mods, and I don't get the wrong board type errors, but the
> radio doesn't turn on. I have remembered to use both iwconfig, then used
> ifconfig and set an IP.

I had another look into the sources. If you get the error line
	"inconsistent board types 3 != 1"
chances are that you just replaced in at76c503-rfmd.c:
	#include "fw-pkg-rfmd-1.101.0-84.h"
by
	#include "fw-pkg-rfmd-acc-1.101.0-84.h"

This won't work anymore , because the at76c503-rfmd.c also passes its
board type (RFMD) down to at76c503.c, while the firmware has a different
one (RFMD-ACC). This is a preparation for firmware download from user space as
required for including the driver into Linux kernel eventually.

Please move your USB ids - it the cleaner mod.
Guess with your first try you still used the old driver or did you rmmod
them from the kernel after installing the new ones?

Some board ids are missing - I'll clean this up.

/Jörg