Re: BenQ AWL400 - Configured but not working

Joerg Albert wrote:

>Hi Timothy,
>
>On Sat, 10 Jan 2004, Timothy Parez wrote:
>
>  
>
>>As you can see the access point is not found,
>>while on windows it works. Also note that the sourceforge driver (which
>>I was told not to use for my adapter did show the AP MAC)
>>...
>>What should I do now ?
>>    
>>
>
>Load the at76c503 with module param debug=0x180003 and re-try.
>This will print more in the syslog: the device's param, the WLAN BSS table
>found by the adapter and why it didn't choose certain APs. Post the syslog
>together with the ESSID of your AP.
>
>  
>
For some reason I was unable to load the driver this way, but I'll try 
again later.
In the meantime I've copied the syslog so perhaps you can see.
my SSID is FLYNET


...............
Jan 10 19:47:44 linuxtimo kernel: ALSA device list:
Jan 10 19:47:44 linuxtimo kernel:   #0: Sound Blaster Live! (rev.10) at 
0xd400, irq 17
Jan 10 19:47:44 linuxtimo kernel: NET: Registered protocol family 2
Jan 10 19:47:44 linuxtimo kernel: IP: routing cache hash table of 8192 
buckets, 64Kbytes
Jan 10 19:47:44 linuxtimo kernel: TCP: Hash tables configured 
(established 262144 bind 65536)
Jan 10 19:47:44 linuxtimo kernel: NET: Registered protocol family 1
Jan 10 19:47:44 linuxtimo kernel: kjournald starting.  Commit interval 5 
seconds
Jan 10 19:47:44 linuxtimo kernel: EXT3-fs: mounted filesystem with 
ordered data mode.
Jan 10 19:47:44 linuxtimo kernel: VFS: Mounted root (ext3 filesystem) 
readonly.
Jan 10 19:47:44 linuxtimo kernel: Freeing unused kernel memory: 176k freed
Jan 10 19:47:44 linuxtimo kernel: hub 5-0:1.0: new USB device on port 1, 
assigned address 2
Jan 10 19:47:44 linuxtimo kernel: hub 3-0:1.0: new USB device on port 1, 
assigned address 2
Jan 10 19:47:44 linuxtimo kernel: hub 2-0:1.0: new USB device on port 1, 
assigned address 2
Jan 10 19:47:44 linuxtimo kernel: /root/at76c503a/at76c503a/usbdfu.c: 
USB Device Firmware Upgrade (DFU) handler v0.12beta4 loading
Jan 10 19:47:44 linuxtimo kernel: Adding 1622524k swap on /dev/hda5.  
Priority:-1 extents:1
Jan 10 19:47:44 linuxtimo kernel: /root/at76c503a/at76c503a/at76c503.c: 
Generic Atmel at76c503/at76c505 routines v0.12beta4
Jan 10 19:47:44 linuxtimo kernel: 
/root/at76c503a/at76c503a/at76c503-fw_skel.c: Atmel at76c503 (RFMD) 
Wireless LAN Driver v0.12beta4 loading
Jan 10 19:47:44 linuxtimo kernel: 
/root/at76c503a/at76c503a/at76c503-fw_skel.c: using compiled-in firmware
Jan 10 19:47:44 linuxtimo kernel: /root/at76c503a/at76c503a/at76c503.c: 
$Id: at76c503.c,v 1.41 2004/01/04 22:31:30 jal2 Exp $ compiled Jan 10 
2004 15:03:15
Jan 10 19:47:44 linuxtimo kernel: /root/at76c503a/at76c503a/at76c503.c: 
firmware version 1.101.2 #84 (fcs_len 4)
Jan 10 19:47:44 linuxtimo kernel: /root/at76c503a/at76c503a/at76c503.c: 
device's MAC 00:03:9d:4b:71:16, regulatory domain ETSI (Europe - 
(Spain+France) (id 48)
Jan 10 19:47:44 linuxtimo kernel: /root/at76c503a/at76c503a/at76c503.c: 
registered wlan0
Jan 10 19:47:44 linuxtimo kernel: drivers/usb/core/usb.c: registered new 
driver at76c503-rfmd
Jan 10 19:47:44 linuxtimo kernel: drivers/usb/core/usb.c: registered new 
driver hiddev
Jan 10 19:47:44 linuxtimo kernel: input: USB HID v1.10 Mouse [Logitech 
USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1
Jan 10 19:47:44 linuxtimo kernel: drivers/usb/core/usb.c: registered new 
driver hid
Jan 10 19:47:44 linuxtimo kernel: drivers/usb/input/hid-core.c: v2.0:USB 
HID core driver
Jan 10 19:47:44 linuxtimo kernel: drivers/usb/core/usb.c: registered new 
driver usbmouse
Jan 10 19:47:44 linuxtimo kernel: drivers/usb/input/usbmouse.c: v1.6:USB 
HID Boot Protocol mouse driver
Jan 10 19:47:44 linuxtimo kernel: EXT3 FS on hda2, internal journal
Jan 10 19:47:44 linuxtimo kernel: request_module: failed /sbin/modprobe 
-- char-major-4-64. error = 256
Jan 10 19:47:44 linuxtimo kernel: Real Time Clock Driver v1.12
Jan 10 19:47:45 linuxtimo kernel: warning: process `update' used the 
obsolete bdflush system call
Jan 10 19:47:45 linuxtimo kernel: Fix your initscripts?
Jan 10 19:47:45 linuxtimo kernel: NET: Registered protocol family 10
Jan 10 19:47:45 linuxtimo kernel: IPv6 over IPv4 tunneling driver
Jan 10 19:47:46 linuxtimo /usr/sbin/cron[348]: (CRON) INFO (pidfile fd = 3)
Jan 10 19:47:46 linuxtimo /usr/sbin/cron[349]: (CRON) STARTUP (fork ok)
Jan 10 19:47:46 linuxtimo /usr/sbin/cron[349]: (CRON) INFO (Running 
@reboot jobs)
Jan 10 19:47:47 linuxtimo kernel: apm: BIOS version 1.2 Flags 0x03 
(Driver version 1.16ac)
Jan 10 19:47:47 linuxtimo kernel: apm: overridden by ACPI.
Jan 10 19:47:47 linuxtimo modprobe: FATAL: Error inserting apm 
(/lib/modules/2.6.1/kernel/arch/i386/kernel/apm.ko): No such device
Jan 10 19:47:47 linuxtimo kernel: request_module: failed /sbin/modprobe 
-- char-major-10-134. error = 256
Jan 10 19:47:48 linuxtimo kernel: atkbd.c: Unknown key released 
(translated set 2, code 0x7a on isa0060/serio0).
Jan 10 19:47:48 linuxtimo kernel: atkbd.c: Unknown key released 
(translated set 2, code 0x7a on isa0060/serio0).
Jan 10 19:50:01 linuxtimo /USR/SBIN/CRON[548]: (root) CMD ([ -d 
/etc/shaper ] && /etc/init.d/shaper timecheck)
Jan 10 20:00:01 linuxtimo /USR/SBIN/CRON[572]: (root) CMD ([ -d 
/etc/shaper ] && /etc/init.d/shaper timecheck)
Jan 10 20:10:01 linuxtimo /USR/SBIN/CRON[580]: (root) CMD ([ -d 
/etc/shaper ] && /etc/init.d/shaper timecheck)
Jan 10 20:20:01 linuxtimo /USR/SBIN/CRON[588]: (root) CMD ([ -d 
/etc/shaper ] && /etc/init.d/shaper timecheck)
Jan 10 20:30:01 linuxtimo /USR/SBIN/CRON[596]: (root) CMD ([ -d 
/etc/shaper ] && /etc/init.d/shaper timecheck)
Jan 10 20:40:01 linuxtimo /USR/SBIN/CRON[604]: (root) CMD ([ -d 
/etc/shaper ] && /etc/init.d/shaper timecheck)
Jan 10 20:50:01 linuxtimo /USR/SBIN/CRON[612]: (root) CMD ([ -d 
/etc/shaper ] && /etc/init.d/shaper timecheck)
Jan 10 21:00:01 linuxtimo /USR/SBIN/CRON[620]: (root) CMD ([ -d 
/etc/shaper ] && /etc/init.d/shaper timecheck)
Jan 10 21:10:01 linuxtimo /USR/SBIN/CRON[628]: (root) CMD ([ -d 
/etc/shaper ] && /etc/init.d/shaper timecheck)
Jan 10 21:14:18 linuxtimo kernel: usb 2-1: USB disconnect, address 2
Jan 10 21:14:18 linuxtimo kernel: 
/root/at76c503a/at76c503a/at76c503-fw_skel.c: wlan0 disconnecting
Jan 10 21:14:18 linuxtimo kernel: 
/root/at76c503a/at76c503a/at76c503-fw_skel.c: at76c503-rfmd disconnected
Jan 10 21:14:41 linuxtimo kernel: hub 2-0:1.0: new USB device on port 1, 
assigned address 3
Jan 10 21:14:42 linuxtimo kernel: 
/root/at76c503a/at76c503a/at76c503-fw_skel.c: using compiled-in firmware
Jan 10 21:14:42 linuxtimo modprobe: FATAL: Module at76c503_rfmd already 
in kernel.
Jan 10 21:14:44 linuxtimo kernel: /root/at76c503a/at76c503a/at76c503.c: 
$Id: at76c503.c,v 1.41 2004/01/04 22:31:30 jal2 Exp $ compiled Jan 10 
2004 15:03:15
Jan 10 21:14:44 linuxtimo kernel: /root/at76c503a/at76c503a/at76c503.c: 
firmware version 1.101.2 #84 (fcs_len 4)
Jan 10 21:14:44 linuxtimo kernel: /root/at76c503a/at76c503a/at76c503.c: 
device's MAC 00:03:9d:4b:71:16, regulatory domain ETSI (Europe - 
(Spain+France) (id 48)
Jan 10 21:14:44 linuxtimo kernel: /root/at76c503a/at76c503a/at76c503.c: 
registered wlan0