Re: D-Link DWL-120 / Belkin F5D5060 tx timeout problem
Sander Zegers <[email protected]>
| Newsgroups | gmane.linux.drivers.at76c503a.user |
|---|---|
| Message-ID | <[email protected]> |
Hi, I added the patch and a ping -f no resulted in a hang up of the console - still access trough ssh. The drivers were removed and I was unable to remodprobe them. The AP is a D-link DWL 6000AP. There is an other client connected to it, so I think the AP shouldn't be a problem, the NIC's are working correctly with the Windows drivers. The new logfiles you requested are attached, if they are not ok or not detailed enough, I'll make new ones. --- greets Sander
messages.txt
(text/plain, 1.6 KB)
Jul 20 11:46:21 laptop kernel: ohci_hcd 0000:00:0b.0: remote wakeup Jul 20 11:46:21 laptop kernel: usb 1-1: new full speed USB device using address 2 Jul 20 11:46:23 laptop modprobe: FATAL: Error inserting usbvnetr (/lib/modules/2.6.7/kernel/drivers/usb/usbvnetr.ko): Unknown symbol in module, or unknown parameter (see dmesg) Jul 20 11:46:24 laptop kernel: /root/at76c503a/usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.12beta14 loading Jul 20 11:46:24 laptop kernel: /root/at76c503a/at76c503.c: Generic Atmel at76c503/at76c505 routines v0.12beta14 Jul 20 11:46:24 laptop kernel: /root/at76c503a/at76c503-fw_skel.c: Atmel at76c503 (RFMD/Accton) Wireless LAN Driver v0.12beta14 loading Jul 20 11:46:24 laptop kernel: usbcore: registered new driver at76c503-rfmd-acc Jul 20 11:46:27 laptop kernel: usb 1-1: reset full speed USB device using address 2 Jul 20 11:46:27 laptop kernel: /root/at76c503a/at76c503.c: $Id: at76c503.c,v 1.61 2004/06/29 21:26:24 jal2 Exp $ compiled Jul 20 2004 11:03:38 Jul 20 11:46:27 laptop kernel: /root/at76c503a/at76c503.c: firmware version 8.101.5 #84 (fcs_len 4) Jul 20 11:46:27 laptop kernel: /root/at76c503a/at76c503.c: device's MAC 00:30:bd:60:c9:cf, regulatory domain FCC (U.S) (id 16) Jul 20 11:46:27 laptop kernel: /root/at76c503a/at76c503.c: registered wlan0 Jul 20 11:47:48 laptop kernel: NETDEV WATCHDOG: wlan0: transmit timed out Jul 20 11:47:54 laptop last message repeated 3 times Jul 20 11:47:55 laptop kernel: /root/at76c503a/at76c503.c: wlan0: lost beacon bssid 00:05:5d:6d:37:d9 Jul 20 11:48:22 laptop sshd[1963]: Accepted password for root from ::ffff:217.162.97.88 port 1240
dmesg.txt
(text/plain, 4.3 KB)
ohci_hcd 0000:00:0b.0: remote wakeup usb 1-1: new full speed USB device using address 2 usbvnetr: Unknown symbol __gtdf2 usbvnetr: Unknown symbol __floatsidf usbvnetr: Unknown symbol __fixunsdfsi usbvnetr: Unknown symbol __divdf3 usbvnetr: Unknown symbol wait_ms usbvnetr: Unknown symbol __subdf3 /root/at76c503a/usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.12beta14 loading /root/at76c503a/at76c503.c: Generic Atmel at76c503/at76c505 routines v0.12beta14 /root/at76c503a/at76c503-fw_skel.c: Atmel at76c503 (RFMD/Accton) Wireless LAN Driver v0.12beta14 loading /root/at76c503a/at76c503-fw_skel.c: using compiled-in firmware usbcore: registered new driver at76c503-rfmd-acc usb 1-1: reset full speed USB device using address 2 /root/at76c503a/at76c503.c: $Id: at76c503.c,v 1.61 2004/06/29 21:26:24 jal2 Exp $ compiled Jul 20 2004 11:03:38 /root/at76c503a/at76c503.c: firmware version 8.101.5 #84 (fcs_len 4) /root/at76c503a/at76c503.c: device's MAC 00:30:bd:60:c9:cf, regulatory domain FCC (U.S) (id 16) divert: allocating divert_blk for wlan0 /root/at76c503a/at76c503.c: registered wlan0 /root/at76c503a/at76c503.c: wlan0: PRIV_IOCTL_SET_DEBUG input 9: 0x180003 -> x180003 /root/at76c503a/at76c503.c: wlan0: PRIV_IOCTL_SET_DEBUG, old 0x0 new 0x180003 /root/at76c503a/at76c503.c: wlan0: netif running 0 queue_stopped 0 carrier_ok 1 /root/at76c503a/at76c503.c: wlan0 param: ssid default (64656661756C7400000000000000000000000000000000000000000000000000) mode infra ch 10 wep disabled key 0 keylen 0 /root/at76c503a/at76c503.c: wlan0 param: preamble long rts 2347 retry 8 frag 1536 txrate 5.5MBit auth_mode 0 /root/at76c503a/at76c503.c: wlan0 param: pm_mode 1 pm_period 0 auth_mode open scan_times 10 120 scan_mode active /root/at76c503a/at76c503.c: wlan0: state 0 -> 1 (SCANNING) /root/at76c503a/at76c503.c: wlan0 BSS table (curr=00000000, new=00000000): /root/at76c503a/at76c503.c: 0xc0532958: bssid 00:05:5d:6d:37:d9 channel 6 ssid default (64656661756C74) capa x0041 rates 82 84 8B 96 2C rssi 13 link 0 noise 0 /root/at76c503a/at76c503.c: wlan0 BSS table (curr=00000000, new=00000000): /root/at76c503a/at76c503.c: 0xc0532958: bssid 00:05:5d:6d:37:d9 channel 6 ssid default (64656661756C74) capa x0041 rates 82 84 8B 96 2C rssi 12 link 0 noise 0 /root/at76c503a/at76c503.c: wlan0: state 1 -> 6 (JOINING) /root/at76c503a/at76c503.c: wlan0 find_matching_bss: returned c0532958 /root/at76c503a/at76c503.c: wlan0 join addr 00:05:5d:6d:37:d9 ssid default type 2 ch 6 timeout 2000 /root/at76c503a/at76c503.c: wlan0: state 6 -> 2 (AUTHENTICATING) /root/at76c503a/at76c503.c: wlan0: rx DeAuth bssid 00:05:5d:6d:37:d9 reason x0006 destination 00:30:BD:60:C9:CF /root/at76c503a/at76c503.c: wlan0: state 2 -> 6 (JOINING) /root/at76c503a/at76c503.c: wlan0 find_matching_bss: returned 00000000 /root/at76c503a/at76c503.c: wlan0: state 6 -> 1 (SCANNING) wlan0: no IPv6 routers present /root/at76c503a/at76c503.c: wlan0 BSS table (curr=00000000, new=00000000): /root/at76c503a/at76c503.c: 0xc0532958: bssid 00:05:5d:6d:37:d9 channel 6 ssid default (64656661756C74) capa x0041 rates 82 84 8B 96 2C rssi 15 link 0 noise 0 /root/at76c503a/at76c503.c: wlan0 BSS table (curr=00000000, new=00000000): /root/at76c503a/at76c503.c: 0xc0532958: bssid 00:05:5d:6d:37:d9 channel 6 ssid default (64656661756C74) capa x0041 rates 82 84 8B 96 2C rssi 17 link 0 noise 0 /root/at76c503a/at76c503.c: wlan0: state 1 -> 6 (JOINING) /root/at76c503a/at76c503.c: wlan0 find_matching_bss: returned c0532958 /root/at76c503a/at76c503.c: wlan0 join addr 00:05:5d:6d:37:d9 ssid default type 2 ch 6 timeout 2000 /root/at76c503a/at76c503.c: wlan0: state 6 -> 2 (AUTHENTICATING) /root/at76c503a/at76c503.c: wlan0: state 2 -> 3 (ASSOCIATING) /root/at76c503a/at76c503.c: wlan0: state 3 -> 7 (CONNECTED) /root/at76c503a/at76c503.c: wlan0: connected to BSSID 00:05:5d:6d:37:d9 NETDEV WATCHDOG: wlan0: transmit timed out /root/at76c503a/at76c503.c: wlan0: tx timeout. NETDEV WATCHDOG: wlan0: transmit timed out /root/at76c503a/at76c503.c: wlan0: tx timeout. NETDEV WATCHDOG: wlan0: transmit timed out /root/at76c503a/at76c503.c: wlan0: tx timeout. NETDEV WATCHDOG: wlan0: transmit timed out /root/at76c503a/at76c503.c: wlan0: tx timeout. /root/at76c503a/at76c503.c: wlan0: timeout, state 7 /root/at76c503a/at76c503.c: wlan0: lost beacon bssid 00:05:5d:6d:37:d9 /root/at76c503a/at76c503.c: wlan0: state 7 -> 1 (SCANNING) usb 1-1: control timeout on ep0out