Re: wlan0 No such device

Robert Burns <[email protected]>
Newsgroups gmane.linux.drivers.at76c503a.user
Message-ID <[email protected]> 
I suspect the driver did not load the firmware correctly. I've found 
that it's necessary to boot into Windows from a cold boot before I 
reboot into Linux; otherwise, the driver will not load in Linux (Linksys 
WUSB11 v.2.8). I suspect the reason is that the firmware is not being 
loaded in Linux after a cold boot, but it is retained in the device's 
memory after a system restart.

Robert Burns
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.