Re: Atmel-wlan-usb digest, Vol 1 #459 - 1 msg

>Making the settings in a particular order seem to work for me so far.
>I am first setting channel, then mode, then essid and finally key.
>The channel defaults to 10 and once essid is set it cannot be changed.
>I also notice that mode managed does not work well with managed nets so 
>I usually
>use auto mode, which works more often than managed mode.
>
>Try manually setting each thing and see what iwconfig reports after. 
>There are likely
>more setting than channel that must be set up before essid.
>
>Always if I unplug MA101 while it is up system hangs forever. I must 
>take it down with ifconfig
>then it will still sometimes hang.
>
>
>On 2003.09.02 16:13 Robert Sparmann wrote:
>  
>
>>Hi,
>>
>>I've got a Netgear MA101 rev. B running (thanks to the guys from 
>>atmel-wlan). Unfortunately I'm not able to configure this device with 
>>iwconfig properly, so I have to run lvnet after every reboot.
>>I found a little shell script which looks like this:
>>    
>>
thanks, but I just found another solution. I just put the values into 
vnet.c and it just worked.
Thanks anyways
-Robert Sparmann