Can't get Netgear MA-101 to work

I'm trying to get the above device to work on a box which has SuSE 8.2 and 
kernel 2.4.22. I have the driver version 3.2.4.4 which I think is rather 
recent. The driver compiles with no problems, and produces a usbvnetr module 
which loads fine. But the device won't work :-( This is what I see in 
messages :

Dec  9 10:24:47 pogo2 kernel: hub.c: new USB device 00:11.2-1, assigned 
address 3
Dec  9 10:24:47 pogo2 kernel: usb vendor/product=864/4102
Dec  9 10:24:47 pogo2 kernel: flags 00000188
Dec  9 10:24:47 pogo2 kernel: FCU ok 00000188
Dec  9 10:24:47 pogo2 kernel: ctrl_wait dca84a80 wait @ de839e78  Adapter @ 
dd384000
Dec  9 10:24:48 pogo2 kernel: remap
Dec  9 10:24:50 pogo2 kernel: vnet_kernel.c: Reseting Usb Device
Dec  9 10:24:50 pogo2 kernel:
Dec  9 10:24:50 pogo2 kernel: vnet_kernel.c: Reset completed.
Dec  9 10:24:50 pogo2 kernel: usb.c: unable to get descriptor
Dec  9 10:24:50 pogo2 kernel: vnet_kernel.c: Get configuration failed
Dec  9 10:24:50 pogo2 kernel: vnet.c: Device Reset failed
Dec  9 10:24:50 pogo2 kernel: vnetusba.c: device initialization failed
Dec  9 10:24:50 pogo2 kernel: usb.c: USB device 3 (vend/prod 0x864/0x4102) is 
not claimed by any active driver.


Can anyone shed any light ?


--

Kindest regards,

Niall  O Broin
System Administrator

MAKALUMEDIA INTERNET & ENGINEERING SERVICES GMBH
niall-hAI5+H4HIxImlAP/[email protected] | www.makalumedia.com
Robert-Bosch Strasse 7, 64293 Darmstadt, Germany
Tel: +49 6151 872 4600, Fax:  +49 6151 872 4619

P.S. The hardware is fine - tested with the Ntegear drivers on A. N. Other OS.