Re: make error, unresolved symbols, berlios driver

Hi,

When i ran the commands 'ifdown wlan0' and then 'ifup wlan0' the BSSID was found. So, now my isp's internal network works. And this may be a bit off topic, but my roaring pengiun PPPoE client can't connect to my isp (and i searched, but couldn't find any answers on the web/usenet). I've checked my windows settings, and they seem to be just like those I've entered in the roaring penguin program.

/Robin
----- Original Message -----
From: Joerg Albert <[email protected]>
Date: Mon, 15 Dec 2003 22:53:14 +0100 (CET)
To: Discussions on drivers for USB WLAN devices based on ATMELs AT76C503A <atmel-wlan-usb-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org>
Subject: Re: [Atmel-WLAN-USB] make error, unresolved symbols, berlios driver

> Hi Robin,
> On Mon, 15 Dec 2003, Robin Edman wrote:
> 
> > The problem is that my device keeps scanning without locking
> > onto any ap at all (i know there are two ap:s in my isp:s network, but
> > only one with a good signal, and they have different essids).
> 
> Have you already checked the scan result of your device?
> 	iwpriv wlan0 set_debug 0x180003
> 	iwconfig wlan0 essid <your essid>
> 	ifconfig wlan0 up
> -> look into syslog
> If your AP is listed in the wlan scan table, your wireless config is
> wrong. If it is not, try to extend the max channel time with iwpriv
> (see http://at76c503a.berlios.de/support.html).
> If in doubt, post your syslog.
> 
> /Jörg
> 
> _______________________________________________
> Atmel-wlan-usb mailing list
> Atmel-wlan-usb-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org
> https://iprserv.jura.uni-leipzig.de/mailman/listinfo/atmel-wlan-usb

-- 
______________________________________________
Check out the latest SMS services @ http://www.linuxmail.org 
This allows you to send and receive SMS through your mailbox.


Powered by Outblaze