New device working: BT Voyager 1010 USB Adapter
Oscar Mejia <oscar_mejia-/[email protected]> Tue, 4 May 2004 13:22:45 +0100 (BST)
| Newsgroups | gmane.linux.drivers.atmel-wlan |
|---|---|
| Message-ID | <[email protected]> |
Hi everyone
I bougth this device months ago. This time I was
trying to setup the BT Voyager to work on linux. I
have had problems with the kernels 2.4.20 and 2.4.21.
Sometimes my computer hangs when the USB device driver
was loading, sometimes when the sound card driver was
loading and sometimes random. I was using the driver
included in suse 9.0.
Now I installed suse 9.1, add this line to the driver
included in the distribution located at
/usr/src/kernel-modules/at76c503-0.12beta9-fwdl/at76c503-rfmd.c
#define VENDOR_ID_BT_Askey 0x069a
#define PRODUCT_ID_BT_Askey 0x0821 /* BT Voyager 1010
*/
and other line to add this device to the dev_table,
downloaded the firmware, compiled, instaled and the
device now is working fine (the computer too!!, no
hangs).
This is more information about the USB device:
oscar:~ # usbmodules --device /proc/bus/usb/001/002
at76c503-rfmd
oscar:~ # hwinfo --usb
05: USB 00.0: 10a00 Hub
[Created at usb.120]
Unique ID: k4bc.6D_HQg8DEQ1
SysFS ID:
/devices/pci0000:00/0000:00:07.2/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux 2.6.4-52-default uhci_hcd UHCI Host
Controller"
Hotplug: USB
Vendor: "Linux 2.6.4-52-default uhci_hcd"
Device: "UHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:07.2"
Driver: "hub"
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no,
active=unknown
06: USB 00.0: 0000 Unclassified device
[Created at usb.120]
Unique ID: cLrx.V1ZhSVF3+oC
Parent ID: k4bc.6D_HQg8DEQ1
SysFS ID:
/devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0
SysFS BusID: 1-2:1.0
Hardware Class: unknown
Model: "Askey Unclassified device"
Hotplug: USB
Vendor: usb 0x069a "Askey Computer Corp."
Device: usb 0x0821
Revision: "1.00"
Driver: "at76c503-rfmd"
Speed: 1.5 Mbps
Config Status: cfg=new, avail=yes, need=no,
active=unknown
Attached to: #5 (Hub)
oscar:~ # uname -a
Linux oscar 2.6.4-52-default #1 Wed Apr 7 02:08:30 UTC
2004 i686 i686 i386 GNU/Linux
oscar:~ #
/var/log/messages:
May 4 11:30:00 oscar kernel: usb usb1: Product: UHCI
Host Controller
May 4 11:30:00 oscar kernel: usb usb1: Manufacturer:
Linux 2.6.4-52-default uhci_hcd
May 4 11:30:00 oscar kernel: usb usb1: SerialNumber:
0000:00:07.2
May 4 11:30:00 oscar kernel: hub 1-0:1.0: USB hub
found
May 4 11:30:00 oscar kernel: hub 1-0:1.0: 2 ports
detected
May 4 11:30:00 oscar kernel: usb 1-2: new full speed
USB device using address 2
May 4 11:30:00 oscar kernel: usbdfu: no version for
"struct_module" found: kernel tainted.
May 4 11:30:00 oscar kernel:
/usr/src/kernel-modules/at76c503-0.12beta9-fwdl/usbdfu.c:
USB Devi
ce Firmware Upgrade (DFU) handler v0.12beta9-fwdl
loading
May 4 11:30:00 oscar kernel:
/usr/src/kernel-modules/at76c503-0.12beta9-fwdl/at76c503.c:
Generi
c Atmel at76c503/at76c505 routines v0.12beta9-fwdl
May 4 11:30:00 oscar kernel:
/usr/src/kernel-modules/at76c503-0.12beta9-fwdl/at76c503-fw_skel.c
: Atmel at76c503 (RFMD) Wireless LAN Driver
v0.12beta9-fwdl loading
May 4 11:30:00 oscar kernel:
/usr/src/kernel-modules/at76c503-0.12beta9-fwdl/at76c503-fw_skel.c
: downloading firmware atmel_at76c503-rfmd.bin
May 4 11:30:00 oscar kernel:
/usr/src/kernel-modules/at76c503-0.12beta9-fwdl/at76c503-fw_skel.c
: got it.
May 4 11:30:00 oscar kernel: drivers/usb/core/usb.c:
registered new driver at76c503-rfmd
May 4 11:30:00 oscar kernel:
/usr/src/kernel-modules/at76c503-0.12beta9-fwdl/at76c503.c:
$Id: a
t76c503.c,v 1.48 2004/03/26 21:54:10 jal2 Exp $
compiled May 1 2004 03:45:55
May 4 11:30:00 oscar kernel:
/usr/src/kernel-modules/at76c503-0.12beta9-fwdl/at76c503.c:
firmwa
re version 1.101.2 #84 (fcs_len 4)
May 4 11:30:00 oscar kernel:
/usr/src/kernel-modules/at76c503-0.12beta9-fwdl/at76c503.c:
device
's MAC XX:XX:XX:XX:XX:XX, regulatory domain MKK1
(Japan) (id 65)
May 4 11:30:00 oscar kernel:
/usr/src/kernel-modules/at76c503-0.12beta9-fwdl/at76c503.c:
regist
ered wlan0
I think this device is ready to be added to the source
code, so everyone can use it in linux.
Regards
O Mejia
____________________________________________________________
Yahoo! Messenger - Communicate instantly..."Ping"
your friends today! Download Messenger Now
http://uk.messenger.yahoo.com/download/index.html