SMC 2662w v4 problem

"Panfilo Rodriguez Cabeza de Vaca" <[email protected]> Tue, 03 Aug 2004 16:59:26 +0000
Newsgroups gmane.linux.drivers.atmel-wlan
Message-ID <[email protected]>
Hello,

Now i will describe my problem:

The system sometimes crashes and bloks when i plug in the usb card (or if=
=20
it's
plugged at booting time), and the last message it writes is the following=
:

hub.c: new USB device ....
usb vendor/product 3eb/7614
flags 00000188
fcu OK 00000188
ctrl_wait xxxxxxx wait @ xxxxxxxx Adapter xxxxxxxxx

and the xxxxxx are allways different numbers.

But, what is more unbeliveable, twice the system didnt crash, but
the card was not detected, it passed the ctrl_line but it gave some
initialization problem in the InitDevice funtion in the vnetusba.c. I can=
=20
read
in the syslog file the following:

"Aug  3 16:54:26 ra kernel: hub.c: new USB device 00:11.2-2, assigned=20
address 2
Aug  3 16:54:26 ra kernel: usb vendor/product=3D3eb/7614
Aug  3 16:54:26 ra kernel: flags 00000188
Aug  3 16:54:26 ra kernel: FCU ok 00000188
Aug  3 16:54:26 ra kernel: ctrl_wait dbb10580 wait @ f7c9be70  Adapter @=20
d9528000
Aug  3 16:54:26 ra kernel: Downloading R505A<6>getting the DFU state
Aug  3 16:54:26 ra kernel: dwld. internal fw: size 1024 left 23368 block =
nr=20
0
Aug  3 16:54:26 ra kernel: getting the DFU state
Aug  3 16:54:26 ra kernel: getting the DFU status

... until bloc nr 23 then ...

Aug  3 16:54:29 ra kernel: going for reset
Aug  3 16:54:29 ra kernel: vnet_kernel.c: Reseting Usb Device
Aug  3 16:54:29 ra kernel:
Aug  3 16:54:29 ra kernel: vnet_kernel.c: Reset completed.
Aug  3 16:54:29 ra kernel: usb.c: unable to get descriptor
Aug  3 16:54:29 ra kernel: vnet_kernel.c: Get configuration failed
Aug  3 16:54:29 ra kernel: vnet.c: Device Reset failed
Aug  3 16:54:29 ra kernel: vnetusba.c: device initialization failed
Aug  3 16:54:29 ra kernel: usb.c: USB device 2 (vend/prod 0x3eb/0x7614) i=
s=20
not
claimed by any active driver.
Aug  3 16:54:32 ra usb.agent[1454]:      usbvnet5A: already loaded

"

Well i'm using debian with kernel 2.4.25 and i also tried kernel 2.4.26 b=
ut=20
it
didn't work anyway.

Any help will be apreciated

thanx in advance

_________________________________________________________________
La informaci=F3n m=E1s fresca desde diferentes puntos de vista en la Revi=
sta de=20
Prensa de MSN. http://es.newsbot.msn.com/