DLink DWL-120e chipset - bug (fwd)

Sorry, I forgot the attachment!

---------- Forwarded message ----------
Date: Wed, 9 Jul 2003 21:10:42 +0200 (CEST)
From: Pasquale Federico Zema <[email protected]>
To: Joerg Albert <atmel-wlan-usb-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org>
Subject: DLink DWL-120e chipset - bug

Hi Jorg,
 I saw a message from you on the web:

> I checked the Windows driver for the dwl-120e1 - it is called
> vnetusbr.sys and seems to contains firmware similar to the one in
> the Sourceforge driver. I'd simply take the latest cvs snapshot and
> add a line for your ids into src/include/usb/config.h in the
> RFMD_DEVICES:
>
> {USB_DEVICE(0x2001,0x3200)}, /* DWL-120e */
>
> and try to build the RFMD variant.

I have an USB DWL-120e. I patched the code and it works well, but
sometimes the driver hangs while initializing the chipset (I always
connect the card before inserting the module in the kernel); when it
happens, the systems goes on working fine, but the whole USB bus is
frozen, it does not recognize any event like (dis)connecting the card or
my digital camera; "insmod" does not exit, "rmmod" fails with a busy
message and I have to reboot the system in order to use any USB device.
 My /var/log/kernel is attached to this mail. You may notice that
sometimes
	vnet_kernel.c: Reseting Usb Device
 is the last message in the session.

By the way, other two small question:
 if I connect the card after inserting the module, it is not recognized:
is it ok?
 if I disconnect the card without previously removing the module, it is
removed anyway automatically: is it ok?

Thank you very much for your kind attention!

 Best Regards
 Federico

#====================================================================#
 Pasquale Federico Zema - PhD Student
 Physics Dep. - Universita' della Calabria
 Cosenza - Italy
 tel:  +39-0984-49-6099/6104
 mail: [email protected]

 +#if defined(__alpha__) && defined(CONFIG_PCI)
 +       /*
 +        * The meaning of life, the universe, and everything.
 +        * Plus this makes the year come out right.
 +        */
 +       year -= 42;
 +#endif
#====================================================================#